KEMIMOTO UTV Harness Pass-through Bezel, Seat Belt Pass Through Bezel Insert Compatible with Polaris RZR XP1000 900 S XC General

The directions were good. There are a few you tube videos that also helped with the install. Definitely use a Dremel to cut the back of the seat. Using a sharp knife will not work. They said not to trim any foam on my model, however I found it necessary to do so for getting the bezels to marry.

A little hard to install the first one but after that, they were easy. Watch some on line videos before you start, there’s plenty of them online. I used a Dremel with a small cutoff wheel, a box cutter with some fresh blades, a long “click” knife, and a 1” hole saw. The trick with the hole saw was to shorten the pilot drill bit and drill easy.Fist one took 2 hours, second one 45 min and the last two took 15 min.

They do their job. Installation seems a little odd, and I'm pretty sure instructions coul've have been written a bit less ambiguous.They are apparently actually a universal fit, so they dont fit the contours exactly, but overall they are pretty good.For install, i'd recomend a body saw or Dremel Multimatic or similar. I managed the cut with an oscillating multitool.

These aren’t expensive but not the cheapest. I tried the cheapest…they sucked. Bought these and had NO ISSUES.SOLID PLASTICRETAINS SHAPE

The product is decent. The back of the seat cut out is correct. The front cut is not. If you follow the front cut (figure H) your seat material and foam will be exposed.pic 2 At the top. It says cut 1" below the seam, " through the bead. DONT DO IT. Pic 2 is the result. The cut needs to be 2.5 inches from the seam or 2.5 inches down from your "z" in the rzr logo. If you don't believe me, before cutting push a screwdriver through your foam, at the ends of the pass through and mark it. Do not cut through the beads stitching. Just a small material slice will work. It's a little tough to stretch the material, but you wont be disappointed. Pic 1.and 3. Ive contacted kemimoto with the issue after destroying my seat. Happy trails. JT

These are great if you dont want to order seats with passthru for harnesses. Easy to install and has the templates so you know where to cut. Took me about 30 min to do

Super awesome makes seats super comfortable

Everything you need to get the job done correctly. Easy to do with the great instructions