Black Horse Off Road Roll Bar (Stainless Steel)

I give this a 5/5. Easy to install, looks great. Took me about 2 hours from opening the box to everything tightened down by myself. A couple of tips: Make sure you leave everything g loose until it’s on the truck and the mounting bracket is attached to the bed. Also I dumped the contents of the parts bag Into a paper plate and sorted everything. Makes it easy to tell which washers and bolts you should be using when you compare it to the packing list/instructions. Last thing, once you start drilling through your bed rail be sure to put a 2X4 behind the rail so you don’t punch through suddenly and put a reverse divot in your bed. Overall a great looking easy to put together product.

Fit perfectly!! Looks awesome! Finish on chrome could be better! But over all happy!

looks great and easy to put together

Fairly nice construction, easy to assemble and looks good but will not fit the width of the bed without fabricationg at least 2 spacers the length of the mounting holes at least 3/4 inches wide.

Purchased as part of the plan to add a light bar for loading and offloading tools and supplies. Delivered on time, well packed and easy to assemble. It has some play in the mounting plates so I suggest leaving it loose in until you fit it to the truck bed then mark where it fits and tighten the bolts. So many suggestions as to where to find the 3rd break light connection on the Internet for an F250 super crew cab 2017. I took it to the dealer for the 60K check up and asked them to find the brake wire for me. Turned out it was in the cab, passenger side access panel in a bundle of single capped wires.

Very satisfied with this product I would recommend also a note. This will fit a ram 1500 product is surprisingly strong after installing. My tip for those who buy this product is to leave the bolt semi loose place it in the bed get the bars adjusted where you want them then secure the bolts.

It is definatly "Pretty" ,a little Light duty for the price

I put this on my 93 F-150 and it looks like this is what it was made for. It would help if the manufacturer would put up some mounting deminsions , I lucked out and one of your reviews said that he was trying to fit to a Dodge Ram and he was xx inches wide and the Black Horse Bar was about 1and 1/2 inches to narrow. So I measured my bed width and found that if I put a 3/8 spacer on each side it would work just fine. I need to say that I have bed rail caps on my truck , if I had not had them I would needed a 1/2 in spacer on each side. I used a 16" x1 1/2 x 3/8 aluminum bar for a spacer, bolts worked just fine more than long enough.

BUYER BEWARE!!!!! Do yourself a favour an pay a couple hundred dollars more an buy from someone else unless u like garbage!!!!!!!! Over weeks of back and forth they said they can't see anything wrong with the product..so I'm screwed with paying top dollar for 2nd rate quality and I made it clear that I didn't want money back I want replacement parts...but still they were and are unwilling to help...

The parts arrived clean and ready to assemble. The instructions were fair, but using some common sense, things assembled easily and in little time. I am happy with the bar and have received several complements.

Absolutely love it!!!!! Fits my 06 ford f150 great..it was the look i wanted!!!

I bought this roll bar for my 2015 Ford F-350 Super Duty because I wanted to make it look better because I'm proud of my truck. I received the roll bar and proceeded to assemble it and tried to make it fit on the bed sides. Unfortunately, the roll bar is not wide enough for the mounting brackets to fit flush to the bed sides. It should of been about 2" wider as there was a 1" gap on each side. I then discovered that the roll bar was for an F-150 truck, so I contacted the seller and they said that this was the proper roll bar for my vehicle. I told them about my issue and they just said, again, that this was the proper roll bar and I had to make it fit. I spent $850.00 on this item and I don't think that I should have to make it fit!!! On another matter, the assembly instructions don't tell you that you have to drill holes in the truck bed and how to connect the attached brake light. It's a real shame because it is a good looking roll bar, but sadly, I'm really contemplating returning it so that I can get my money back...

Good product but not easy to install since I had a tonneau cover. had to make additional modifications at additional cost.