Scosche CRTNN01 Car Stereo Backup Camera Harness Compatible with Select 2010-20 Nissan Nav-Equipped Vehicles - RCA Wiring Adapter - Video Cable for Aftermarket Radio - See Vehicle Fit Guide in Images

I bought this harness to retain my stock rear view camera for my Nissan Rouge 2013 Special Edition. My Rouge 2013 comes equipped with a stock head unit which uses the CRTNN02 (Please see Pictures)If your car comes equipped with the same head unit as mine (Non-Navigation head unit, and iPod Button) you need to order the CRTNN02.If your car is equipped with the Navigation head unit (larger screen and Nissan logo on the screen), then you will need the CRTNN01.Make sure you take the radio out and check the back of your stock unit before ordering, just to make sure you are ordering the right one. Unfortunately I bought this item, and I had to return this harness because it did not fit on my Nissan Rouge 2013 Special Edition.As you can see on the 4 pictures I placed on this review, the connectors on both units for the reverse camera are different.

Not a simple plug and play solution. Worked for my intended use, requires some guesswork and modifications. I can see people struggle with installation as documentation details is a bit sparse. Snipped off the female bullet plug connector and tied it to the pink backup signal wire of an aftermarket android radio. You will not get video unless you do this. RCA plugged into backup cam port (yellow ).Ground is screwed to the now empty screw hole the previous OEM radio once utilized. Hole is part of the metal frame that had metal to metal contact with the rest of the panel interior. The harness itself fits 2011 Nissan Juke plug which looks the same as the radio plug. Radio installed is the "S JoyBring", "JOY-W008" model. Currently everything works great.

wiring harness works great, it’s just the backup cameras look like crap on these cars… but to have the stock camera working on a new head unit is great. it even came with picture instructions for those less experienced, which is awesome.

This stated it would work with my 2013 Rogue, and I DO have the factory head unit with nav. After installing the new aftermarket head unit, the camera would not power on. I would up clipping off the barrel connector and using the socket to directly wire things and now it's good to go. I did have to pair it with a 12v to 6v stepdown converter to complete the install and get it working.

Perfect for a Nissan Qashqai 2011. Very easy setup with the guide included. CRTNN01 socket is good if you are replacing the OEM Nissan Connect (3rd photo).

Fit in my 2013 nissan rogue

Funciono lo más bien cumplió con su objetivo

Keep blowing my fuse, had to remove it. Waste of money and is so expensive for what it is