BDK-MT-600A Heavy-Duty Utility Truck Bed Tailgate Mat, 60" x 19.5" – Extra Thick Rubber Cargo Liner for Pickup Trucks with Universal Trim-to-Fit Design - Black

Great houses

Worth every penny. Nice and thick, but things buyers will need to know. You may order this for a specific truck but realistically in most cases you will need to trim it up to an inch. No big deal, I used a straight edge and a utility knife and took 2 minutes but plan on trimming. From reading reviews I also decided to upgrade to a bigger self tapping screw just incase I ever had to remove it. Lets face it, it you want something form fitted, with a quality screws your going to have to pay much more then $42. So do you want precision, perfection, fit and quality, or settle for cost savings, durability with same protection you decide. $42 vs $150

1) Missing hardware, 2) has a curl that won't quite go away even after laying flat and with weight on the end for a week. 3) Could be a smidgen shorter in CS/RS direction. You can feel it just clip the box side when closing the door. You can see how I lined up the rubber to the top edge of the door. Use your fingers on both hands to feel that the rubber is centered from left/right (RS/CS). I used #8 x 1" long SS pan head screws with #12 SS washers (12 pcs each). The slightly larger diameter fits the counterbored hole nicely. As another installer said, install the screws in the middle and work your way outward. I used a 1/8" drill bit for the pilot hole. I set the drill's torque higher to get the screw to engage the pilot hole and then stopped to lower the torque to level 2. This is so I didn't extrude the plastic from underneath the washer. For my truck (2023 F150) the only hole I had to be careful with were the two outermost corners nearest the bottom when the door is closed. There is a transition in depth at those two hole locations. Just concentrate in making sure the bit goes in and not just slide down the incline / formed depression. Even with the rubber fully installed, you can se the slight curl on the CS passenger side. Good enough and I am hoping eventually it will relax. If it does, maybe I will need to trim some off, but right now I only feel a slight bump when I close the tailgate.

Arrived quickly and installed easily in My RAM taruck

This mat is very thick and very sticky. The only thing I wish is that they would make it fit certain trucks cause after I trimmed it it doesn’t look as nice and as clean as it did with the factory corners but I did my best. I’m sure it’s more of a user error type thing than their fault being that it’s a universal Matt.

The quality is okay, it's very thick. Very strong plastic smell, needed to leave it laying in the bed of the truck for a few days before I could handle it without getting the smell all over my hands. You need to trim this with a level/metal ruler and an exacto blade. You also need to go buy your own self tapping screws, the screws that came in the box were totally useless. But, for the price, it does the job, just be ready to trim it well and to buy your own hardware to mount.

The first time i purchased one of these tailgate mats i used it for something different on my truck. I went through a divorce and dropping down to just my income, and having horses to provide for i had to deciede do I sell my newer truck i'm paying $750 a month for or sell my single cab that was paid off and just had brand new tires and wheels put on it, or sell my horses. I chose to sell the newer truck, keep the horses, and keep the paid off truck with brand new tires and wheels saving me an average of $2800 for new tires when the newer truck needed tires. Which was gonna be in the next yr. But with the paid off truck, i had little room for groceries. So Being " I can figure out something" I bought lumber, sealed it, stained it then sealed it again and built a rack to go across the back towards my tail gate, and built dividers, One holds 4 gracery bags, one holds 2 and one holds 3 bags. I used the tail gate mat for the rack to sit on so it and the groceries weren't sliding around sratching up my rhino spray in liner. worked perfect. I after putting on a bed cover bought a 2nd tailgate mat and added it to my tailgate. I also added lights that come on automatically when you open the tailgate. So these mats work for many things just not tail gates. They are thick and heavy and stay in place. I did not screw down the one under the rack but i did use the screws for the one on my tailgate. Bye the way we've has a ton of rain here and once it stopped i opened up my back end and between the cover and the tailgate mat not a drop of rain got inside the bed of my truck. I'm real happy about that.

I would give this zero stars if I could. First off the screws do not fit on a 2021 Dodge ram tailgate. They’re way too small. The item itself is too big and there are gaps in between where the screws go and nothing to keep that down against the tailgate flat. Quite possibly one of the worst purchases I’ve ever made. I’m literally gonna take it and use it to put in front of my cat litter box. Do not spend the money.

The matt is thick and heavy that good but it is smelly, like burnt rubber it gives me nausea

I put this on a 93 Chevy K1500 8 foot box tailgate. I liked the thickness of this product. It looks like it will hold up nicely over time. I bought my own stainless tapping screws and I started from the middle and worked my way outward. Fits well. Actually a little too well lol if that makes sense. I had to trim the sides about 3/8" all the way down in order for the tail gate to close. But now my tailgate does not have a rattle and I love that. It was so annoying. Good product. I would purchase again.

Buen accesorio, hule de calibre grueso

Easy to install looke and works great

Muy grueso el plástico, pero flexible fácil de ajustar, no es resbaloso, trae las pijas ya incluidas, ajuste casi perfecto a mi f250 súper duty, solo un pequeño corte en un solo lado, nada complicado ni afecta a la estética,