LET'S RESIN Resin Epoxy Kit, 1.5 Gallon/5.6L Bubble Free & Crystal Clear Epoxy Resin Supplies with Measuring Cups, Stir Stick, Gloves, Clear Resin for Mould Casting, Table Top, Jewelry, Art, Craft

I've used a few brands of resin and Let's Resin is one of my top two that I now alternate between depending on price at the time.It's a simple 1:1 ratio of resin to hardener and the bottles are clearly labelled. Mixing should be done slowly, making sure to scrape the sides and bottom of the mixing cup to ensure full mixing, let the resin sit for five minutes before working with it to allow any bubbles introduced during the mixing process to rise to the surface and dissipate before pouring. Providing mixing is done following the correct instructions, the finished product is clear, glossy and bubble free.Included in the box is also a silicone stirring stick which is good as I find this does not introduce so many bubbles during mixing as a standard lollipop stick for stirring.It's a reasonable value resin and durable when cured. Curing time as with other resins is dependant on room temperature conditions etc but is usually fully cured within twenty four hours and demould time is ealier than that.Let's Resin is one of my favourite brands of resin as it's easy to use and gives good results every time so I'll continue to use it going forward..

This resin is so easy to use, and has a lovely shiny finish. I have tried a lot of resins in the last couple of months, and this one is really good. It's easy to use, odourless (I still recommend you use a respirator, mask and gloves though!), and there are very few bubbles. I just let it stand for a few minutes after mixing and it is good to go!

Brilliant resin. Comes out really clear if you mix to instructions. Not to bad a smell until I used the heat mat. Very glossy finish too! Definitely worth it and 100% will be using from now on.

Nice resin to use. You can tell its mixed as the mix turns from slightly cloudy to clear, they say on their instructions, the swirls disappear. I paid more than I usually would for bubble free resin, but this was not bubble free. The resin I had in my starter pack had less bubbles when mixed.I'm trying a different brand which is less expensive but if you don't mind sorting out a few bubbles, this might be the resin for you.

I make dice for the most part but I have also done trays coasters and wall art. Let's resin is easy to use 1:1 by vulme. It cures super hard. It has superior UV resistance to most resins I have tried .. and I've tried a lot. I use this for most of my dice because I know it will stand the test of time that goes with being rolled and just look at the results.. super clear great suspension and works amazing with all techniques including Petri

Lets resin is my go to resin.It is easy to work with, virtually bubble free and my favourite resin to work with.

This resin is the only one I will use, the quality is amazing, it's easy to mix and use, good size bottles, crystal clear results if mixed properly.. fantastic

My order came earlier than expected, which is good, but I was away when it came, so the driver threw it over my side gate. I’ve used this resin a lot. It’s crystal clear and barely any bubbles. I’ve used it for all kinds of projects. My latest one, before I even finished it, my son’s boss wanted it. I’ll be ordering again very soon.