Aoxun 6.2x4 FT Shed Outdoor Storage Shed with Lockable Doors & Slooping Roof Metal Garden Tool Shed for Backyard, Patio, Poolside (Brown)

I gotta say, for the price, this is a great little shed. I got 6'x4'. Panels were a little banged up on two corners upon arrival but nothing I couldn't correct by hand. I actually followed the directions step by step, page by page, and I was able to assemble it in just under 5 hours. Instructions were nearly pictures only, very little wording, but easy to understand and complete. I was mostly by myself, but I did get the wife to help me hold a couple of parts, she helped for maybe 15 minutes when the wind picked up and I only had 2 corner panels screwed in at the bottom and no frame on top, so she helped hold it all steady until i could get it stabilized and framed. One person can do it, but it would be very frustrating. The biggest problem I had was manipulating the short screws. I spent half my time picking up the screws I dropped. I had no trouble with the screw holes lining up as some of the others have said, but I did assemble mine on a flat and level surface, which I believe is the biggest issue in getting the holes to line up correctly. Doors assembled and fit perfectly, this was an original concern on how well the doors would actually operate, and they are just fine. Do yourself a favor before you assemble. Make for sure the surface is flat and level, make sure there is no wind, and have a helper with you at least until you get the corners up and the top framed. Another tip, have someone with little fingers help you place all of those hundreds (literally hundreds) of plastic washers on the little screws for you. This was very time consuming.

I was nervous to buy a metal shed as they can dent easily and possibly rust but at the end of the day, it was much cheaper and what we could afford so here we are. It came packed well but still had a few dents in the metal even with all the Styrofoam to protect it. I am a 49 year old out of shape woman, but, with time and patience, I got it together on my own in a few days time. Hubby only helped me at the end with laying down some plastic for a moisture barrier (I built the shed on square paver stones and then put down plastic on top of the stones once the shed was built) and carrying the box out to the back yard for me. I started off with opening the box and finding all the screws and small parts along with the instruction book. I read through the book for a few days before I was ready to start the project just to familiarize myself with the parts, pieces and each step along the way. I had read some reviews that mentioned misaligned screw holes so I took my time with each piece trying to get it right the first time and avoiding mistakes on my end while also hoping everything was made correctly on the manufacturer's end. Everything went together mostly well, even the few walls that came with light dents fit well. There was one time when doing the top frame portion where even after double checking myself, I made a mistake and had the screw holes on the wrong side. Instead of tearing apart what I had already built, I just pulled out my drill and made new holes, no problem. There were a few other spots where I had to make new holes where the manufacturer missed them but it was only a few spots. I also made the mistake of not noticing that there were two different types of washers, one hard plastic for the walls and one a soft silicone for on the roof. I did redo the few roof panels that had the wrong washers as that wasn't a big deal. Everything else went together smoothly and I got it done. I did add some 3/8" wide x 3/16" thick self stick vinyl weatherseal around the doors as I could see a gap and was worried about rain getting inside. I also got some OSB plywood pieces for the floor that fit great with little cutting on my part to make it fit. All in all, if you take your time, this is a very descent shed and can be built by one person if needed. I only gave it 4 stars due to the dents, a bit of a bummer but they didn't affect the structural integrity of the shed for me.

This is not a perfect product by any means, but the price more than makes up for that so i cant give it any less than 5 stars. Be prepared to do a little extra work putting this thing together to get everything aligned. You also need to provide a flat and level base, this is more important than it might seem, as any issue at the base will translate to highly misaligned parts. For mine, I used 4x4s as beams, 2x10s as joists, and a sheet of 3/4" plywood (all leftovers in my case). The good: The instructions are relatively easy to follow, just pay attention to the hardware codes, as some of the screws are easy to mix up. All of the holes do align within reason, and the unit is very sturdy once fully assembled. The size was exactly as specified, which is great for planning the base. Overall it fits my needs well. The bad: The instructions could be a little clearer when it comes to part orientation, as most are not symmetrical and it is difficult to tell the correct assembly direction until moving to the next step. Some holes, especially at the roof, although align within reason require some help to get the screws in. The door lock also needs some adjustment to align correctly. The only thing that would have been nice are holes in the base plates for mounting the unit to its base with screws/bolts/etc. I had to drill some myself. The worst thing is that where the side panels overlap, there can be significant gaps, so i recommend adding self-tapping screws to seal them better. The door also has significant gaps, so door sealing tape is recommended. Tools used: I recommend having at least a ladder, power drill with philips #2 driver, drill bits, an adjustable wrench or sockets, and a second person to help. You may also want a caulk gun and silcone to seal things up if you want it to be more water tight, and foam insulating tap to seal the doors.

Very poor quality, also for refund you have ship it on your own expense. No recommending to buy

I only gave 3 stars because I had to redrill the holes on us4l and ue5r for the back panels to attach correctly, and Although there was no damage to the packaging the roof panels were all deformed on one outer edge, (I can only assume this was done at the factory). These were all minor issues in my opinion as I am mechanically inclined so both issues were rectified with minimal tweaking. Once it was all together I was very happy how it turned out. If I had to make any recommendations to the manufacturer it would be too reinforce the hinge area on the doors but all in all I am pleased with it's functionality.

This is a nightmare to put together. 2 of us did it and there were a number of holes that did not line up. We ended up having to drill new holes and plugging the old ones so water doesn't get in. It took soooo long to put together because of this. The final product it good for the cost, but clear the day to assemble it.