Yibid Universal Mini License Plate Tail Brake Light Tag Holder Folding Bracket Mount for Motorcycle Suzuki Kawasaki Ducati Honda Chopper Bobber Racer Cruiser Dirt Sports ATV 4x4 Off Road Street Bikes

First of all it was a perfect fit for my '85 Honda XR250R. Your bikes fender shape will depend on the fit. Secondly, after making sure that the lock washers are fully compressed, and using blue Loctite it shows absolutely no indication of loosening, like many reviewers have noted. I have caught it on brush a few times, and there is just enough friction in the pivot area after tightening per above that it can still rotate up after impact, and rotating it back down has yet to be a problem or caused the pivot point to loosen. As a result of the reviews indicating that they lost their plate because this thing fell apart I attached a small wire to the plate and secured to a side frame member, but that has yet to come into play. Can't be beat for the price either!

If ur looking for a sleek an sturdy tag mount this is the one u want fits any bike undertail an u can form it how u want an simple install jus two bolts an washers an nuts an done

I should have known better, but you get what you pay for. The material is very cheap. I had to extend the pre-dilled holes to fit with my motorcycle, which was not a big deal. But after have it holding my plate on for two rides, the pin holding the two parts together (the joint which allows it to swing) vibrated loose and my plate detached from my motorcycle. The only thing keeping it attached were the wires for the illuminated LED bolts I use to secure the plate to this bracket.All in all, do NOT put this on a motorcycle. It might work for your child's bicycle vanity plate, but will not work for a motorcycle.

I gave it 3 stars because it is as described, but didn't work for me. On one side it fits a normal moto plate but the other side isn't wide enough to mount on my tail. There isn't enough bend in the hing for it to sit flat when mounted. The worst issue is that it is held together with bolts that loosen every time you swing the hinge. If you use locktite it could work, but the point is mute since I can't fit it with my aftermarket tail.

Very light, the screw needs to be improved because keep on getting loose. I had to make another hole to make it fit better.

Simple and cheap. Worked well for me for 4 months now and still working great

Worked perfect. Hangs under driver side tilt bed remove existing screw and place thru bracket hole then re-screw.Easy peasy folks

Higher quality that expected. And the hinge made it much easier to put on my bike.