Senlesen Stainless Steel Bathroom Free Standing Tub Filler Faucet Brushed Nickel Freestanding Bathtub Faucets with Handheld Shower Mixer Taps

This standing faucet is beautiful, the quality is a 10 for its affordable price. It has a powerfully water flow and the water hose is very functional. Looks amazing in my new remodel bathroom.

Absolutely beautiful sitting next to the oval bathtub gives elegance and class very easy to use. Have used it numerous times.

This is a beautiful faucet and sprayer. All metal (except for some of the hand-sprayer) and it works well. As you can see the instructions are almost worthless and they did not include which of the two holes in the faucet are hot and cold (plus it isn't marked). I wish they would have applied a sticker or something that would explain which hole is for the hot water line and which is for the cold. I learned that the cold inlet is closest to the front (nearest the diverter's square knob) and the hot inlet is closest to the rear. I noticed some people had a hard time removing the plastic piece that will protect the faucet in shipping and from debris. Mine simply came right off after removing the 2 black plastic bands and pulling the white plastic piece away from the faucet. If you're a DIYer like me this is pretty easy and I don't think you need to hire a plumber (but don't hesitate to do that if you are not up to the task). If you decide to take it on yourself, please let me give you a few tips on the installation. The system should be built from the ground up, connecting the facet last. Here are my notes for a new installation. This list is FAR better than the ones provided. Obviously, if you are replacing an existing system, you will already have the water supply off as noted in step 9, before removing your existing system. 1. Screw the floor-mount bracket to the bottom of the pole (don't mount it to the floor yet). 2. Run the provided water lines inside the pole with the long metal ends at the top where the allen wrench screws are. I used a pencil and some rubber bands on top to keep the water lines from falling out. 3. Attach the screw-on floor mount to the pole making sure water lines feed out the bottom past the floor mount. 4. Potion the pole so that it is closest to the rim of the tub without touching it and the allen screws are facing the rear, mark and cut a hole in the floor using a drill mounted 2 inch. hole saw, then attach the mounting bracket to the floor. Note: I did not use their screw/bolt below screws they provided, but instead I used 3, inch and half long wood screws with washers on the ends (super easy). 5. Position the faucet so that the hand sprayer is on your left and the hot/cold handle is to your right (as you're facing the tub). Connect the faucet by inserting the long metal end of the cold line to the faucet's front-facing inlet, closest to the square diverter knob, and use a wrench to tighten. This may require 2 people (one to hold the faucet and one to attach the water lines). 6.. Repeat step 5. for the hot line in the faucet's rear-facing inlet. 7. Attach faucet to pole using provided allen wrench to tighten 2 allen screws. 8. Connect the hand sprayer to the faucet (hand-tighten as hard as you can is all that should be needed). 9. Turn off the water source and connect provided water lines to your water supply (use provided brass connectors and optionally the 2 provided extension lines if needed). Note: I did not use the provided extension lines as they were not needed. It is also a good idea to add shut-off valves to the 2 supply lines if you do not already have them. 10. Once attached, turn the water back on and inspect for any leeks as you test the faucet and hand sprayer. I hope that helps.

Very easy installation. It's designed for hoses that are installed on the flooring, however, we were able to improvise with our older home's hoses, which are installed from the wall, since we installed it in a corner behind the tub, one can't see the hoses anyway. The down side is the slow flow of water. Tania long time to fill the tub.

Me encantó este grifo, tiene un diseño moderno que se ve elegante en el baño. El material se siente resistente y el acabado cromado le da un toque muy bonito. La instalación fue sencilla y el rociador de mano funciona excelente, con buena presión de agua. Estoy muy satisfecha con la compra, realmente le dio un cambio elegante a mi bañera. ¡Lo recomiendo sin dudar!

Faucet looks great. Worked perfectly until hose burst during night and flooded bathroom. Needless to say I would not purchase this product. One of the other lines inside also has a balloon from overexspansion. Unfortunately we did not get installed within 30 days so we are stuck.

Good quality product, price vet good, considering the offerings in the market place! Durable product!

We just completed a complete renovation of the master bathroom and decided on installing a free-standing clawfoot tub, which meant a free-standing faucet. We liked the design and features of this faucet but we chose it because of the reviews. It has a beautiful design and it's simple elegance as I like to say. The water flow is decent and the hand-held wand makes for a very nice feature for both humans and pets needing a bath ;-D

Très bon produit

Muy bonita y de mucha calidad. Al ver reseñas dude y cuando llego note que la parte superior era muy pesada en comparación del tubo. Hice arreglos para fijarla mejor pero al final no fueron necesarios funcionó perfecto

Small hiccup on delivery that seller rectified instantly. Thank you and Merry Christmas. Tub looks great...now to install taps!

Aún no lo instalo, pero se ve de muy buena calidad

Cuando yo la compre estaba en 3500 pesos y ahora de la nada está en 1000 pesos ?! Como es posible esto ! No muestra rebaja ni nada, simplemente puso este precio, entonces al momento que yo lo compre fue un robo con el precio tan exagerado !!!