TotalPond Corrugated Tubing, 1-inch

This tubing replaced 11+ year old pump-to-waterfall tubing in a small pond. The old tubing had turned very rigid and friable, Inside opening exactly 1 inch, fit perfectly on my pump, very flexible, very easy to make a “U” shape from my pond pump up to a small waterfall. Easy to cut to size. Seems like very durable but only time will tell. Very pleased so far. Also, delivery delayed some due to corona virus (fully understand and agree) but yet came relatively quick without having to wait weeks or months. Much appreciated!

This product was exactly what I needed to get my pump up and running through an antique hand pump.

This stuff is ok for the money but a few small things. 1st there is no inner wire running in the corrugated areas it's just thicker plastic. 2nd this stuff is rolled fairly tight and if you try to straighten it out it will crack or break completely. I got around this problem by setting my oven to 170 the lowest temperature it would go. my oven has a digital readout that counts up when the oven hit 125 I shut it off and put the whole hose in there for 5 minutes. When I removed the hose it was very easy to work with and had no breaks or leaks. So basically heat it up, you can also probably place the hose on a hot driveways on a hot sunny day for same effect.

good

works great will buy again

During repairs to our home, we replaced bad galvanized plumbing with Pex, and we had to bring it to the laundry room under and through the concrete slab floor. Not wanting to have concrete on top of the Pex water lines, we used this Corrugated Tubing as a way to both protect the Pex from the soil and concrete, and to allow us replace the Pex if we ever needed to in the future without cutting out the concrete floor again. Strong, flexible, yet smooth on the interior was perfect for what we needed. Plan to replace the old galvanized pipe from the water main to the house using this pond pipe and running the Pex through it.

I purchased this tubing for my waterfall and pond. The hardware and stone stores here stopped carrying this size and type of tubing. Home Depot does carry them (same price), but my local stores never has them in stock. Heavy duty tubing is perfect for waterfalls that have a lot of power in pushing the water long and tall distances. My pump is a 5500gph pump and this tubing handles it just fine. The tubing I had in place was chewed up by my dogs, so I cannot discount the quality of the tubing for that. he previous tubing (same as this one), lasted me for 5 years without any issue. If you are doing a waterfall project and need some nice, high quality, heavy duty tubing, this is your best bet! For installation, it is best to let this sit in the sun for at least 15 minutes to get nice and soft. It makes it easier to put onto connectors, fittings and bending. It is virtually impossible to do this in cold or cool weather. If you have to install in cool weather, use a hair dryer around the fittings to get it warm. Pros: Heavy duty! Lasts for a long time. Handles high water pressure/volume. Cons: Somewhat pricey.

A bit expensive. I was going to knock a star for price, but in the end it is really good quality. Be sure to soak the end you will be working with in hot water(I boiled water and let it cool slightly) first. It makes a big difference and will make it easier to connect it to fittings.

Good quality, no complaints

Hard to find product , but measured up to the pond pumping test this Summer. .

Perfect for my project.

would not recommend for 2 reasons: -too tight for 1" pond fittings. -floats.