BRINGSMART JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-Locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

Just what I needed for my DIY indoor DTV antenna rotator. Together with a 9V battery and a DaierTek switch (AIN: B0F7L32LCR) this works as a way to move my antenna around that's mounted high in my garage ceiling. Perfect.

After trying 3 different motors. This is the one it is quiet and strong.

Fast delivery, tested motor and works great. .5 amps at 12 volts under no load, 1 amps at 12 volts under load. No included paper work

These are fairly powerful, little, units. In fact, it almost worked for my project (To raise and lower my drill press table). I believe the metal gears and construction is pretty admirable - just not powerful enough for my needs. To use this for opening a cabinet lid or drawer, I believe would be excellent - especially with the small footprint. I'm saving up for a more powerful gear motor to do what I need. I'll save this for some, other, future project.

Does great job tuning my ham magloop antenna.

Great little gear motor, seems to be of good machined quality and materials. For the 6 rpm motor at 12VDC, I measured the stall torque using the test setup shown (accounting for the torque contributed by the weight of the pliers), and found the motor torque to be 32.3 in-lb (37.2 kg-cm). My only gripe is the lack of data sheets, especially since it appears that, in addition to gear ratio the motors also differ between rpm models.... so you can't presume that torque will be inversely proportional to rpm when comparing motors of different rpms. Attached is info obtained from an eBay listing for what I believe to be the same product, but I can't confirm so use at your own risk. Despite the many sellers of this design, I think they're all made by, or licensed from, the same Chinese manufacturer.

When I got it it was locked up. I took it apart and fixed it. It works fine now but I shouldn't have had to fix it. It should have worked right out of the box

Good power with the 3 rpm gearing.