FurniFusion Acoustic Wood Panels, 2 Pack 94.49' x 12.6' Soundproof Wall Decor (Walnut)

Great product, arrived with no damage (4x boxes) - well packaged. Dimensions- All panels were straight, no wobbles, the felt undercut and flanges were all consistent, for very easy installation. Appearance- all panels looked great, no imperfections that I would complain about. The walnut finish was consistent, the small variation adds to the look. Material- real wood under veneer, as described (no mdf/ plastic) Assembly- very easy, due to the panel straightness. 1” black pan head screws. All cross cuts made w/ a 4 1/2” cordless Dewalt. With painters tape, minimal/ acceptable tear out. I would absolutely buy and use again.

I love the quality and build of these acoustic panels. They arrived in an excellent packaging. All of the wood panels were perfectly aligned. I did not realize until I received these panels that these come sealed and one doesn’t have to worry about the splinters or hand prints, which is great that it doesn’t require any after care maintenance. These have completely transformed the look of the room. These were super easy to install and impressed with consistency in quality from 1 panel to the other. I have an ac unit outside my bedroom, which was the secondary reason of mine to get these panels and I can feel a definite reduction in external noise. The only thing I didn’t like about these panels was that it took me over 2 weeks to get them. I wish I had got them sooner.

These are really well made and solid! They are easy to install - I used black drywall screws and it was super easy and you can't see the screws! I used my table saw to trim them down to size. ONE CAVEAT: I bought these twice. They install like tongue and groove panels. The first set of six were super! The second set of six all needed to have the "tongue" side trimmed otherwise there would have been a very noticeable larger gap between each panel. It was a bit of a pain but it would have been very noticeable if I didn't trim them. So my advice: test them out in place BEFORE securing them

I ordered 5 pairs for a vertical 10 ft wide section of my office wall. I used black screws in the soundproofing material to attach to the wall. I have a 40lb wood American flag that I wanted on studs. Therefore I aligned the wood staves with a stud in the wall, and drilled through the wood and into the stud to hang the flag. That section is now supported by a wall stud. You can do this to every section…I wouldn’t rely on the black soundproofing to support any substantial weight you decide to hang serious weight (the screw would likely rip through it). Align at wood stave with a stud and hide or hang the item. In short, you need to first load bear your panel before you load bear your shelf/tv/ect. The wood is actual wood (not compressed sawdust) so one could actually hang some decent weight if the panel if secured to the wall appropriately. Just remember to drill a pilot hole so you don't split the staves. All 10 piece aligned near 99 percent perfect and were not damaged. Even if they did come with an imperfection, I was going for rustic so it didn’t matter to me. Good product and great easy to align and hang. I got them on sale but consider spending a few more dollars for actual wood and not vinyl laminate ones you see on other options. Cheers!

Such and easy install, patiently waking to be back in stock so I can finish my wall. Product is sturdy and didn’t have any scratches. The felt does get hard to vacuum when making cuts.

I wanted to elevate the plain walls in my home so that they could be visually pleasing to look and at the same time have a practical use. Always wanted to use the slat wall design in my home but the whole process of picking up the lumber, having it cut as needed, staining it etc kept me away from it but I came across these ready made slat walls that removed all the hassle. They are easy to install and don't take long to put them together. I simply nailed them to the wall as per the instructions provided. I bought the walnut color slat wall which looks great and simply elevates any plain boring walls to an aesthetically pleasing interior design.

For fifteen years I lived with the very sloppy job the previous homeowner did with laying brick veneer on the fireplace. I will never have to look at them again. This looks so modern. I installed them myself using hand tools to trim them and construction adhesive to go right over that faux brick. It probably took 4 hours total from cleaning the faux brick, cutting and dry fitting, gluing and pressing into place. Most satisfying and headache free DIY I have done in a while.

These panels look great and easy to install. I’ve had several compliments on my teams calls.