PCCOOLER PC Case Mid Tower Desktop Computer Gaming Superior Case for ATX/M-ATX/ITX with 6 ARGB Case Fans,Column-Free Design,360MM Radiator&400MM GPU Support,Easy Installation (C3T500 ARGB Black)

My first PC case had a covered top. This was a mistake. My GPU was running at 75 degrees Celsius under Load or While Gaming. This case has dropped the Temp by 10*C. My GPU idles at 50*C or below and runs between 60* to 67*C while gaming and watching videos on 2nd and 3rd screen. My CPU is always under 50*C whether idle or Gaming. The case looks amazing and the dust filters do not raise the Temperature. I am really happy that the RGB hub has a SATA power plug on it. My MOBO has the old 4 pin header and this case uses a 3 pin. I was able to plug a 4pin into the MOBO and get all the fans to work and light up. I am not able to change the color with the button on the case. This could be the way I wired it. I was also able to add 3 120mm fans to the top as exhaust. These are from my old build and are Molex daisy chained then plugged into my PSU. With a 3 pin on your MOBO you will not have these issues. The fans are completely silent. I cannot hear a thing. This case keeps my PC so cool the GPU fans are not even on at times. The fact it comes with 6 fans that actually work is a huge pro. I tested with a piece of paper and it blew it away and sucked it to the vents. I would purchase again and recommend, especially at the $83 price point. This was an outstanding deal and there is plenty of room for when I upgrade my MOBO to a full size ATX. It is very large for a Mid size. I could put a GPU in twice the size of my RTX 3060.

Absolutely love this case. Mine must of been made on a Tuesday because I've had no issues at all.

Wonderful case. Lots of real-estate inside which I had not realized but works perfectly with my 9060xt. Knew it probably wouldn't be original wire routing since it was used but that was the risk I took. Love it though. Great aesthetics. The dual chambered design provides for easy cable management, whether you want it Instagram worthy or just shoving everything back there. It can do both.

I built three PCs with this case. Two for my sons and one for me. Very roomy. And the class panels proved to be very useful in accesing things when I wanted to adjust things or just wanted to re route cables. For a nice visual inside the cable management was good because I could hide all the groupings behind the back divider where you have to have some mess. Lastly, it is easy to add or remove fans and it looks great with ARGB lighting!

The case is very spacious! But not even a year after buying the LED in the case is beginning to give out. For example instead of one fan being all magenta the blue is giving out and red is showing. I am very disappointed in this.

I bought this case because of the preinstalled fans, but I cant figure out for the life of me how to change the LED colors. I contacted amazon support to have the seller reach out to me, but does anyone have any tips while I wait?

Lots of room in the back. Not sure why people are complaining about the wiring. It was pretty easy to navigate myself. All the fans are already plugged in and all you need to add is a sata cable. Fans look great and come with a lot of options. Great for $100. Just waiting for my GPU still!

Très belle tour les câblage pour le hub sont déjà raccorder silencieuse je recommande

chassit är billigt och bra o med 6 stycken fläktar så kan man absolut inte klanka på priset. Nu tog jag bort HDD huset på baksidan av chassit så datorn inte kommer använda annat än m2. så det blev sjukt mycket utrymme och enkelt kabelhantering. en negativ del dock är att kör du ATX moderkort så se till att usb,audio och alla F-panel kablar dras fram först för du kommer aldrig få dem att gå under ifrån annars. du kan även göra samma sak med GPU kabeln vilket jag inte gjorde men det ser ändå någorlunda clean ut. chassit har bra med utrymme och ser bra ut. en ska o tilläga är ju den fläkt hub som medföljer också det är guld värt i dem delarna som finns med från grund i chassit. för priset så rekommenderar jag detta chassit.

Dieses Gehäuse ist bisher das einzige, in das ich eine Wasserkühlung, eine RTX 4090, eine Soundkarte, und alle vorinstallierten Lüfter reinbekommen habe! Und trotzdem könnte die Grafikkarte noch ca. 10 cm länger sein, Platz von der Tiefe her ist genug. auch von der Breite her ist noch ca. 6-8cm Platz, für den Airflow also kein Problem. Da das Netzteil getrennt von den anderen Bauteilen liegt, kann man ganz elegant alle Kabel verstecken. Kleiner Tipp: Wer eine 4090/4080 einbauen möchte, sollte das Gewicht der Karten nicht unterschätzen. Durch die Lüfter auf dem Gehäuseboden kann man keinen Halter zwischen Boden und Karte installieren. Es müsste entweder ein Lüfter raus, oder aber man installiert eine Halterung von der Seite.

Goed product. Maar houd er rekening mee dat er wat werk nodig is om het moederbord en andere componenten in het moederbord te installeren.

Both of the the 2 cases before this had some correctable but items that should not have failed in the first place. It was worth the wait this case had the best fan and cable arrangement. The hinged glass door on the front is the only way to go. Not all manufacturers with glass in this price range do it. With the side glass snapping back in place it left this case the best ( of the 3 ) to work on during my build. Highly recommend but change out that cheesy little cloth pull on the door panel put a proper metal one. Will look better & work better.