Fence Post Repair Kit - Thickened 11-Gauge Steel Anchor & Stakes to Fix Broken/Leaning 4x4/6x6 Wood Post Support (Heavier at 5.47 lbs, 1-Pack)

If you’re like me and you don’t want to have to replace the whole wooden fence when it starts to lean, you look for a heavy-duty solution like the ARKSOLDIER fence post repair kit. First off, the thickness of this steel is exactly what you need for strength - 11-Gauge is no joke. I tapped it, I knocked it, and it rang true every time - that's toughness you can trust, the kind of support our fences need. Each anchor, a veritable fence post stabilizer, weighs a substantial 5.47 pounds, and this weight gives you the stability you desire. I mean, I actually lifted these heavy-duty anchors, and you can feel the heaviness signaling that your fence post isn’t just mended; it’s extended in durability. The one-piece molded design impressed me the most. It’s not made of bits and pieces - it's a single, solid unit, engineered with the Exquisite Craftsmanship Manufacturing method that screams durability. When they say it’s 33.62 inches of steel, they’re not messing around. The L-shaped reinforcement is like a guardian angel for fence posts stakes. It’s amazing how it transforms a shaky fence into one that’s ready to face any weather head-on with substantial support. Installing it? It was straightforward, and I had these fence post anchors up in no time - no digging, no mess. This stabilizer is a fit for various fence posts, which is a major plus in my book. However, I do wish they came with decorative caps to enhance the look after installation. For those of you on the fence about a fence repair solution, I recommend giving ARKSOLDIER menders a shot. It’s an investment that pays off in peace of mind - your wooden fence isn’t going anywhere. Just a heads up, make sure your fence is hefty enough to handle the anchor’s weight. Overall, these are the anchors you won’t regret anchoring to. Happy fencing!

The Arksoldier fence repair kit includes everything needed to install and it works. In fact it works very well. As it happened I needed an additional kit to brace a previously stable section of fence. The only downside is not with the product itself but with shipping. When ordered, both times there were delivery projections that were not met repeatedly. The second order according to customer service never made it to the shipper and had to be reordered. Excellent product if you can get it.

I used this to repair two rotted 4x4 fence posts. They worked great and are built really well. The welds look great and it’s just a very high quality product. It was a nice surprise to see that with the hardware package was a drill bit and a magnetic driver socket for the lag screws. I will buy this again if the need arises ******update****** After having these in the ground for awhile, I would recommend setting them in concrete right from the beginning. I have two that I had set in concrete initially because the soil was too loose to just pound them in the ground and they are still holding tight. The one that I did just pound in the ground has started to work its way loose so I pulled it back out and set it in concrete also now. So be aware that over time they may loosen up in the soil and you may need to redo them if they aren’t set in concrete

Liked: Solid sturdy metal on bracket. Withstood pounding with 5lb sledge during install. Did the job of plumbing up hinge side of 48inch vinyl gate. Disliked: Supplied hardware was terrible. The drill bit broke almost instantly, the heads of two of the bolts snapped off, and the magnet in the bolt holder came out. Overcame these problems with tools and hardware of my own. Recommendation: use the bracket , trash the supplied accessories.

These are superb! After years of repairing my falling down fence and every imaginable technique and product this one works and is easy! They even give you the bit, screw, and socket (which I didn't see but next time will use). At one point I poured a massive concrete pier with a metal bracket for a fence post which of course rusted off and left me with an immovable inpentrable mass. I just pounded this down to settle on the concrete apron. Its not flush to the ground but looks OK and no other gizmo short of a jack hammer and new post could have done better. Its a high wind area so I used metal zip ties for extra support which was probably unneccesary. I sprayed the whole thing with rubber acrylic which also was redundant but I had it do used it. Only problem is what to do with all the other useless post repair products accumulated in my garage. Not a bad problem considering the new solution. Compared to the useless products its a reasonable price. I just hope it doesn't get crazy tariffed. Buy this unless you like to suffer..

We installed 4 of these a couple months ago. Several of the posts were leaning pretty bad. We've had several heavy rains & the posts have remained upright. The supports were packaged very well. Highly recommend.

Easier than replacing a post. Works perfectly for what we needed.

The anchor supports a very long stockade fence. It's a solid product and worth the money.

X

I used this fence post repair kit to stabilize a leaning wooden post in the yard and it worked really well. The 11-gauge steel feels heavy-duty and solid. Once installed the post stopped wobbling and feels secure even in windy weather. The anchor sank in without needing to dig much, and after tightening everything the post stands straight and firm. It seems built to last and gives good value for how easy it was to install. For anyone with tilting or damaged fence posts, this kit is a simple, effective solution.

Got these when I realised I couldn’t access the side of the fence post to fit post buddies I’d bought. Fence is 6ft high and was damaged from storm. Two posts needed securing. Once I’d checked for obstructions, I was able to hammer in the brace. With the first one, I’d struggled to hammer it home as there was a massive tree root beneath the surface that I was not aware of. So, next time, I stuck a long screw driver down to check for any obstructions before starting the hammering. Great result - very pleased at how secure the fence is now.

Sehr hilfreich und von sehr guter Qualität!

Used this to successfully shore up 4 fence posts that had contact with soil and rotted at the base. Was immediately very impressed by the weight and rigidity of the design. Owing to the old concrete base of the posts, I successfully sunk the sharp end of the supports into the ground, and they took a big bashing with a steel mallet, and stayed intact. Did the job perfectly. The supplied wood screws, pilot hole drill bit, and driver bit were top quality too. Fully endorse this product.