VEVOR Motorcycle Lift, 1100 LBS Motorcycle Center Scissor Lift Jack with Saddle & Safety Pin, Steel Motorcycle Jack Hoist Stand for Street Bikes, Cruiser Bikes, Touring Motorcycles

Perfect, cheap, no frills, works great. Will hold a street glide for the winter with no problem. Even bought on for my friend because it’s a good deal. I just put a socket on my impact driver to raise and lower it. Great for checking tire pressure, storing the bike with tires off the ground, doing general maintenance, etc. Stays steady, will lift and hold a 1000 bike with rider and stays in place.

The Vevor Motorcycle arrived on time and was well packaged. The lift arrived ready to use. Inspection and initial use revealed the lift to be well designed, well finished and well assembled. The threaded lifting rod turned smoothly and was properly greased. The thrust bearing at the head end of the rod was well toleranced and also worked smoothly. The safety lock (rod) was a key purchase consideration as it provides an added measure of security beyond the threads of the lifting rod mating with the threaded shaft under the lifting platform. I am looking forward to reliable service from this lift.

I have 2 motorcycles that have exhaust pipes below the frame. This jack works great with the adjustable U-channels, eliminating any possibility of damaging the exhaust. Raises surprisingly easy with just the scissor-jack. Solid and extremely useful. When the center stand isn't enough and you need both wheels off the ground, this is your tool!

Works really well to be so simple, and small. I have a v star 950 and the motor is just a little outside of frame. I had to use 2 pieces of 2x2 to put on jack. Lift worked really well and was stable. I would recommend this jack if your doing small DIY maintenance.

Overall performance was decent for what I paid (used/returned item price was an absolute steal). I only needed it to lift electric scooters. These PEVs are commonly flat on bottom and are usually between 75 -150 lbs, so well within the tolerances. It's certainly not a higher performance shop centerpiece that anyone will be envious of. And I personally would hesitate to put a coveted 800 pound bike upon it. But it has a earned its keep this time around. I shall not be returning it. My only complaint is that the jack slides around inside the "dolly" pan because there is A LOT of room and the surfaces dont offer any substantial resistance against eachother. A thin silicone mat would fix this, or several hundred additional pounds of load probably. I ended up stuffing some EVA foam around the base that I had lying around. Temp fix but its been working well enough. Have fun putting all those nuts and washers on to secure the wheels. I would have appreciated hex head bolts instead as I didn't actually have box end wrenchs to fit simultaneously. That's my two cents for what it's worth to ya.

i definitely needed this for doing some work on my HD. great quality, safety and stability. easy to jack up and down. comes with a pin for locking in place.

I use this lift to raise up my Suzuki DR650. The bike only weighs about 360 pounds so, in theory, this lift is over kill but it works great. It seems very sturdy and well built. I did wipe some grease on the screw threads before I used it. I don't feel the need to use a power tool to operate it, I just steady the bike with one hand and turn the included tool with the other. There's a lot of suspension travel in the DR so it has to be raised up a bit but there's no problem lifting it. I used it for a tire change day. I took off only one wheel at a time and never felt like the bike was at risk of falling.

I do not have motorcycle, but I do need something that can raise a few inches and hold heavy stuffs from time to time. Usually, like install kitchen garbage disposer, water filters, and some other situations when you are fixing things. This is the one that can do those jobs very well because it is small enough and low profile.

Haven't used it yet but feels and looks really good quality.

Utilisation un peu "détournée" du produit : associé à des mini plateaux à roulettes, je m'en suis servi pour déposer des radiateurs en fonte (120kg) et les reposer après peinture. Zéro effort. Le cric est bien conçu, bien fabriqué, est hyper solide et son épaisseur réduite lui permet de se glisser sous des éléments au raz du sol. Le plateau est bien antidérapant ce qui rassure lors du levage. Je recommande.

Parfait ++

Parfait, utilisé pour démonter/remonter une grosse boîte auto ZF sur une BMW X5, hyper stable

Great scissor jack for the price. Lifted securely my Royal Star. Thanks