BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener & High-Speed Secure Lock, Adjustable Size Handlebar Cellphone Cradle for Bike Bicycle Scooter ATV, Fit 5.4-7.2'' Smartphone

This mount worked very well on our Ebikes. Easy to install, and looks/feels significantly stronger than other cell mounts we have tried (much better than the cell mount accessory that came with our bikes). Clamped very securely to handlebars (no slippage), with a wide band of adjustments for both phone position and screen size (two ball joints provide easy univeral configuration, but has locking screw to secure once installed). Comes with Torx & hex tools needed for the various mount fasteners, and four different bushing sizes to fit a wide variety handlebar sizes.. Good cell mount and reasonable priced for what you get!

I wanted the aluminum phone holder, but this one filled all the gaps and doubts, super sturdy polyamide and glass fiber structure feels high quality plastic, very resistant, feels a bit heavy too (not a dealbreaker since the components are durable stainless steel bars), phone is very secure, after you insert it you turn a back round knob and the spring/latch is not opening, I liked that comes with a mirror adapter if you dont use those holes or adapt it on the bottom of the mirror screw. Depending on the phone I liked that this one, the camera is usable since its aperture allows it to (unlike the Lamicall brand), so works as a dash cam as well. Overall happy with the results (this arrived fast). I used it with a Galaxy Note 10 plus with a transparent cover and it still has space for more (a Galaxy S25 ultra with an otterbox chunky cover also fits so you get the idea) you just have to open the side holders with a phillips screw driver and secure them at the end to the desired fit. Ease of installation and comes with a manual as well. I used the 24.5mm rubber band it comes with 4 with different measures, I used it in a Honda CB300f Twister 2025, wanted to upload 2 videos but amazon only allows 1 per review. Highly recommend it.

I am giving this 5 stars due to its versatility, value, solid construction, and good ergonomics. I used this mount on my 2015 Harley street glide S and an iPhone 15 pro. I loosened my brake lever/mastercylinder bracket to aid in adding the clamp for the mount, removed and replaced one zip tie for control cluster wiring on handlebar. I added purple loctite to all the small screws on the posts you adjust to fit your model phone. The mount works well even at highway speeds and wind, the vibration pads do their job and in the 5 hours I rode with this mount, can’t recall an instance whether idling or cruising that the phone screen wasn’t clearly visible. I feature and price compared many of the more expensive brands and models. There are quite a few much more expensive mounts that are very well built and much sleeker and lighter than this mount, and they do an awesome if not better job as well. But for the 30$ price I had to try this first, and I am glad I did. This mount far exceeds my expectations and is very solid, almost vibration free with a solid grip on my phone, plus a quick lock screw feature, and a security key set screw to help prevent theft. I highly recommend this mount.

**Near the bottom of this review is a PRO INSTALLATION TIP** FIRST, the "unimportant stuff" - I have purchased 6 or 7 phone holders from different brands for my motorbike. Only one of them was good enough to be used on my bike for over 3 years. I'm changing my OEM mirrors on my motorbike to bar end mirrors. The last phone holder was installed with an L bracket directly under the mirror bolt. Although this phone holder is sold by BRCOVAN, The actual brand name is KEWIG. NOW, the important stuff" - "THE GOOD" - The packaging is very good. Everything is separated and doesn't come in one big bag like the inferior brands. As soon as I picked up the main body of the phone holder, it did feel pretty heavy, and very durable. Although it is made of plastic, like pretty much everything today, the plastic is a lot harder, a lot more dense than any other brand I've tried in the past. The handlebar installation was pretty simple and quick. All of the rubber inserts have raised edges that help align the handlebar insert with the bracket. Something I have never seen before. The insert and bracket themselves once installed do not move at all. The instructions are pretty clear. Not only do you get photo instructions, but you also get worded instructions. You will need a Phillips head screwdriver to adjust the side and lower grips on the main body of the phone holder. The grips themselves are made of rubber / silicone and are nice and soft. We will see how everything holds up in Florida weather. I only own a motorcycle, so I ride it every single day. Rain or shine. Installing the main body of the phone holder to the double socket arm was very difficult. Inserting one of the balls into the double socket arm was pretty easy. But once you have one ball inserted, the screw inside the twist lock on the double socket arm acts like a fulcrum. So the opposite end of the socket arm will close up a little bit. So don't waste your time trying to shove both balls into the double socket arm, until you read below. **PRO INSTALLATION TIP** There is an "anti-theft screw" on the double socket arm. Take this screw out completely. Then you can actually unscrew the twist lock a little more. Allowing both balls to be inserted into that double socket arm very easily. I have a Galaxy S24 Ultra with an OtterBox Commuter series phone case. The phone with the case is pretty thick, but it does fit very nicely with a little extra space all around. And the telescopic rods on top do hold the phone very securely. They do feel well-built. Also, there is a high speed secure twist lock on the top back of the phone holder near the telescoping rods. But honestly, I don't think you will ever use it. That's how secure my phone feels when inserted. The face of the KEWIG phone holder also has soft rubber / silicone panels. And they do feel really really nice. "THE BAD". Once you get the phone holder completely installed, inserting or retrieving your phone IS NOT a "quick one-handed access" as the product information states. If you do not hold the double socket arm when inserting or retrieving your phone, the positioning of the phone holder WILL MOVE. Even if it is just a little bit. But that really is a small thing to me, seeing how well made this phone holder is. Because most phones today do have two columns of camera lenses on the back of the phone, 1 telescopic rod will cover the innermost lenses on your phone. But for me, that really is not a big deal. Now for the vibration dampening. It is only marginally better. That's all I can say. But I don't really use my phone's video camera when I'm riding. So again, no big deal for me. All in all, I wished Amazon would allow us to give 1/2 stars, so I could give the KEWIG phone holder 4.5 stars. But since they don't, I will have to settle on 4 stars. If KEWIG could do a redesign of the double socket arm so it doesn't move and actually allow for a "quick one-handed access" and allow no blockage of some of the rear camera lenses on today's phones... This phone holder would no doubt be 5 stars from me.

Good solid, low vibration phone holder for motos. I've got a few thousand miles on mine now and like it. I've used the Ram Mount X type holder with rubber bands for min 200k miles and this one is quicker to put the phone in a secure holder. Seems to hold it as secure as the Ram Mount. At $25 it's a bargain.

A great mounting system for a great price. It is easy to install and can be adjusted on the fly due to the use of a ball mount. Once tightened, it is sturdy and have not had issue with it moving out of place. It has a vibration damper which works great even when riding on bumpy roads i don't see my phone going crazy. It holds onto my phone well so I have no worries of it falling off. I mounted this on my dual sport and have taken it on moderate trails without any issues. It is compatible with most phones, I have an iPhone 16 Pro Max with a relatively thick case and camera guard and I'm easily able to mount and dismount it.

Ich wollte einen Smartphonehalter für's Motorrad, bei dem ich das Phone, so wie es ist, einfach und sicher einsetzen kann. Diesen hier kann man so einstellen, daß er das Handy mit Bumper oder Hülle bombenfest hält, ohne dabei auf irgendwelche Seitentasten zu drücken. Die leicht hakenförmigen Aufnahmen oben und unten sorgen dafür, daß das Handy nicht aus dem Halter springen kann. Der gesamte Halter ist vibrationshemmend auf seiner Grundplatte gelagert. Das lässt eine gewisse Beweglichkeit zu, ist aber nicht „wabbelig“. Nachdem das Phone eingelegt wurde, kann man den Federspanner mit einer Rändelmutter fixieren, sodass er sich nicht öffnen kann, und auch niemand das Telefon einfach entnehmen kann. Die Befestigung am Motorrad erfolgt mittels Ram-Mount (Eine Kugelschelle ist dabei, ich habe aber bereits mehrere Ram-Mount-Kugeln am Motorrad). Damit sich auch diese Befestigung nicht einfach zwecks schnellen Diebstahls öffnen lässt, kann die Knebelschraube mittels Torx-Schlüssel ebenfalls fixiert werden. Im Gegensatz zu meinem Fahrrad-Handyhalter, bewegt sich dieser hier nicht bei jedem Schlagloch, sondern bleibt so stehen, wie man ihn eingestellt hat. Fazit: Es gibt billigere Möglichkeiten, sein Handy an's Mopped zu kriegen, aber dieser Halter ist sein Geld wert. Gut verarbeitet, durchdacht konstruiert, praxistauglich.

Diminui em mais de 90% a vibração, permitindo até uma filmagem por ele. Super recomendo.

Look good and easy to install

Using this product with Galaxy Fold 5, and it is great, the phone is secured while folded, and also made of a very good material and quality I recommend it for others

Esta perfecto Muy buen material tomando en cuenta que es nuevo Solo hay que ver si aguanta el sol y la lluvia por qué los colchonsitos que tiene para amortiguar son muy delgados pero por lo pronto está todo perfecto