MULWARK Screwdriver Bit Set & Socket Kit, 77-Pieces Ratcheting Screwdriver Set with Case, 77 in 1 Multi Bit Screw Driver for Home DIY, Electronics, Car Emergency and Garage

Length x Width x Height = 8-3/4 x 4-3/4 x 1-7/16 inchesI bought this to have a nice set all in one that fits in a good sized handled toolbox.The dimensions excellent for this situation!So far I checked and the ratcheting on the main driver works fine in left, right, and no-ratcheting settings.The main ratchetting handle is 4-3/4 inches long x 1 inch wide/diameter at it's widest point.The precision driver does not ratchet, BUT has like most precision drivers has a base/handle that rotates. This means you can hold that base with one hand OR apply pressure down on it and spin the driver to screw or unscrew.The precision driver dimensions are 4-3/4 inches long x 5/8 inches wide/diameter at it's widest pointBoth driver handles worked with out issue with me just spinning them and working them out of the box. I have yet to "drive" anything with them yet but feel they are solid and good to go. No red flags.The case and all the holding snaps and indentions are rock solid!!! No rattling around bits or stuff coming loose or bits flying around in the case.I believe there were some reviews saying the driver handles were held in very tight, too tight to easily remove the driver handles.They are held in very tight, BUT if you simply lift the handles from the end/base they flip up and out with no difficulty at all.This kit has it all, I'm impressed. I have an older, smaller similar kit to this I got many years ago that I LOVE but it has a "T" shape handle and I thought I had lost it (found it a day after ordering this). Though this kit is a little bit bigger, it has the sockets, is higher quality, 2 drivers, AND no "T" shape. The "T" shape causes problems sometimes so now I have a straight ratcheting driver handle.You will be able to pull this kit out of the toolbox and get the work done without having to make 10 trips back and forth to the tool box, or carry the entire toolbox with you just to work some screws/bolts/etc.Finally. I noticed the main driving bit has a cool little feature. The base/bottom screws off and allows you to store like 6 maybe 7 bits in the handle! Why does this matter?This allows you to save space in a tool box or a utility drawer where you simply have a screw driver with about 6-7 bits in the handle and 1 bit in the tip and you can save space while having well equipped ratcheting driver with the most common bits ready to grab and go!In my toolbox the case will go under the lift out tray and the main driver will be in the tray itself with 8 of the most common bits so I can just grab the screw driver or tell someone "hey can you grab me the orange screw driver" and again be ready to go!I got this on sale during prime day for less than $15 and that was a great price for all the value and quality I have seen so far in it. I hope this helps folks pull the trigger to buy this set when it is marked down and should they need it. I probably should have bought 2 now seeing the price it jumped too after Prime Day!!!

I use this for doing maintenance at work on smaller jobs. Has plenty of attachments that are useful. I’ve snapped a few ratchets in my day and this set has held up to any torque I’ve put on it for a couple months now. Out performs its price tag.

Definitely a good set to have for around the house. Tools feel good quality and there's a nice assortment of bits. I wish the magnetization was a little stronger as I found some longer screws will tend to fall off easily.

Love this for easy access to all the tools needed. I put together a lot of furniture and this has been helpful to replace the little tools always provided. Everything needed! Very happy with this purchase.

This is as good as any of the affordable sets here.The bits and sockets are all in standard sizes, so they're interchangeable if you strip them.Tolerances are great, bits and sockets are not loose or too tight in the drivers.The case is pretty robust, though I'm not sure it will survive a drop. The case latch seems sturdy enough.The list of bits at the back of the case is a nice touch that not every set has, and it's laminated, so it should stay intact for a while.I like that this set also has the 13mm socket that most other similar set don't carry. I needed this size a couple of times in the past, and it always annoyed me that I don't have it handy, and had to fumble in my toolboxes.The drivers feel good in hand, nothing wrong with them as far as I can tell, and don't feel cheap.But this is expected to be the failing point of such a set, so only time will tell if they will last.What I do miss are flexible extension shafts for the precision (4mm) and regular (1/4") drivers, though other sets in this price point also don't carry.I already have an iFixit Manta, so this set was supposed to be the one to drop at work, being the no-commisioned IT guy at the office, maintaining the office computers, but I like it so much that I actually purchased another set to keep at home.

Cool

Only giving three stars on this one because it could be better. The ratcheting handle is very good. Very good size and function, and ease of use. Lots of bits is a plus. The flexible extension is why I bought it. Lots of really good features with this. The carrying case is a great size, but isn't super well thought out and kind of cumbersome. The worst feature is non magnetic bits. Yes, it comes with a magnetizer. If I get a no heat call at midnight, I don't want to magnetize my bits, which is pretty sketchy to begin with. The magnetizer doesn't work well, if at all. I would have paid $40 more for this kit if the bits were magnetized (with good magnets), and the carrying case was better designed. This is a good kit that could be GREAT with a little rework.

Nice to have everything you need in one place for those small jobs