vevor Motorcycle Stand Lift 850lbs Front Rear Combo Stand Lift Stand Front Wheel Fork Stand Rear U+L Fork Swingarm Spool Stand Compatible with Most Yamaha Honda Kawasaki Suzuki Motorcycles Black

The VEVOR 850 lb motorcycle lift stand is sturdy, stable, and easy to use. Its design, compatible with U and L stands, as well as swingarm spools, makes it very versatile for most motorcycles. It provides good safety when lifting the motorcycle and is ideal for maintenance and cleaning. For its price, it offers excellent value and performs its function very well.

Really stable. Easy to put together.

The price for the stands were really really good. The delivery was really quick. The assembly instructions were easily followed. However for the wheels, they should note not to torque the bolts hard otherwise the wheels cannot roll. The overall weight for both stands are light. I have a pit bull rear stand and it is about as heavy as both of these stand put together. The rear stand is very functional and works fine. For now it is doing its job well. I really have nothing bad to say about it. Only time will tell if the lighter weight will hold up over time. The front stand is another story. There are two springs providing constant tension on the fork supports to hold them in place, but it makes quickly using the front lift. You have to pull the fork support apart against those springs to get them under the forks of the motorcycle. If not they will go right into the front disc brake openings and you have to get them out. The rubber protection of the fork supports were already coming off and looking distorted on the first few attempts trying to get the front end up. When the front end went up, there is something that doesn't quite look right and/or safe. It does hold up and it does feel solid, but it just doesn't look right.

Great quality easy to mount and then it holds my 2008 Hayabusa

No issues. Easy to put together. Solid construction. Used for a Yamaha R7. Would recommend for similar machines.

I bought this Vevor front and rear motorcycle stand set for my 2025 CFMoto 450SS, and I honestly couldn’t be happier with how it turned out. Right out of the box, you can tell this is a heavy-duty, quality setup. Everything is made from thick steel, the welds are clean, and once assembled, the whole system feels incredibly stable. It doesn’t flex or wobble under the bike at all, which gives you peace of mind when working on it. Assembly: The stands come with a detailed instruction guide and only took me about 10 minutes to put together. All hardware was included and fit perfectly. The process was straightforward—no special tools required. Functionality & Fit: This setup lifts both ends of my bike effortlessly. The extended handles give great leverage, and the 3-inch wheels roll smoothly even on my wood floor. Once the bike is up, it stays solid. No slipping, no shifting, just confidence. I’ve used it for chain cleaning, oil changes, and just general maintenance and detailing. Versatility: What really makes these stands shine is the adjustability. The front stand comes with double fork heads adjustable from 6.5 to 9.5 inches, and the rear U-style stand adjusts from 8.9 to 13.8 inches. They also include a second set of L-shaped fork heads which are perfect for bikes with flat swingarms. That kind of flexibility means these will work not just with my current bike, but also with pretty much any other major brand—Yamaha, Honda, Suzuki, Kawasaki, etc. Real-World Use: I’ve left my 450SS up on these stands for hours at a time while working on it, and there’s been no tire compression, no shifting, and zero worries about the bike tipping. That’s especially important if you’re storing your bike for winter or just want to avoid flat spots on the tires. Conclusion: For the price, I’m blown away by the quality and performance. These Vevor stands are every bit as good as some of the more expensive brands, and they look sharp too. If you’re a DIY rider or just want to make your maintenance routine easier, do yourself a favor and grab this set. It’s one of the best garage upgrades I’ve made. Photo attached: My 450SS lifted on the stands—solid, centered, and looking clean 🔧🔥

These are okay-ish stands. I needed some quick to remove my wheels on my Kawasaki Z900RS to have new tires mounted and balanced. These did the job. Fit and finish leave a little to be desired. Had to sand the rear spool forks because they ate my swingarm spools up. Deep gashes in them. Upon inspection the forks had very sharp edges and burrs. Sanded and polished them, but damage was already done to my spool bobbins. Front stand is very frustrating to get adjusted and set up. Spring loaded forks suck. You have to try and hold them open where you want them setand lift at the same time(push down). Scratched my wheel hubs the first go around, and it seems they don't spread open far enough for ,my bike. Both could use longer handles for better leverage, I have to use my foot and step down on both front and rear stands to get my bike lifted. It holds my 400+ pound bike pretty steady, at least enough to remove wheels and do chain adjustments, and for washing as well. But the tubing is pretty thin diameter and I expect them to start bending and distorting with use. Ordered me some Pitbull stands to use long term, but I'll keep these as spares, and loaners. Also added some plastic caps to the ends of the front stand so they don't fill up with water when I washed my bike. If you need some ok stands quick and cheap then these will work in a pinch.

Great stands. tubes are thick and all the parts listed. Does come with a manual but no "extra" tools. All the parts were listed and accounted for. The only thing I would mention is the front stand. When assembling, do not go by the manual. It states to put the spring on the inside near the hooks. This cause a spring load and the hooks will shoot out and you will have to push the hooks on each side to fit the fork. If you reverse the spring to the outside, it will be wider and easier to mount to the motorcycle fork.

Worked like a charm on 2018 Ninja 1000. Good solid product. Lifted the bike with ease. So far so good.

Bonne qualité du produit bien fini sans défauts. Montage rapide (10 minutes). Béquille arrière très stable. Je n’ai ps utilisé l’avantage pour l’instant

Awesome quality for the price tag! Good buy

Sehr gut, sehr stabil.

Le matériel semble correcte niveau solidité, mal peint (écailles sur des parties de surface). Mode d'emploi en anglais, schémas illisibles, bref, inutilisable. On n'a aucune idée si les rondelles vont du côté tige ou du côté écrou. Rien au niveau explication d'utilisation. Bref, tiens le matos, et tire ton plan sur youtube. Je recommande si vous êtes débrouillards, et si vous ne regardez pas aux détails près.