Poly Watch Plastic Crystal Glass Polish & Scratch Remover Repair Tool with Blue Cloth

Incredibly satisfied. During one the surprise heavy snowfalls, I was shoveling snow, and as I was walking in front of my wife's recently purchased car. I slipped, and the shovel flew and went down the front of the windshield leaving several deep scratches almost top-to-bottom on the glass. Several windshield repair companies said the same thing: They didn't want to try to buff/grind it, since it could leave a flat spot on the glass and distort the view. Replacing the windshield would be several hundred dollars. Before I spent that money, I googled to see how others dealt with scratched windshields or glass. That search also showed me some results of what's used on crystal and jewelry as well. Consistent positive results came up for a few products, and I ended up buying toothpaste (What the heck, it was cheap!), Polywatch, and Novus 7100 (the #2 solution was recommended). The toothpaste did not work at all. I'm not sure it made any difference in the scratches. I used a generous amount of 2 "recommended" brands and put some muscle behind it on a clean cotton cloth. Looking at the tiny tube of Polywatch, I figured I'd try that next, since I'd probably run out, then I could compare it to the Novus 7100. I sparingly ran a thin bead of Polywatch along a less deep scratch, then used the microfiber cloth. In about 15 seconds, the scratch was not visible! Shocked, I applied some to a section of a deep scratch. It took about a minute, but again, the scratch went away. Then I went for the deepest scratch. After roughly 90 seconds, the section of the scratch I worked on was _barely_ visible. I ended up working on other scratches, then came back to the deep one. There was more than enough product in the tiny tube to cover all the scratches, since I had to use so little to work on an area. In about 15-20 minutes, I couldn't see any of the original scratches, but it was starting to get dark outside. I windexed the windshield, and I'll take a look tomorrow. I imagine that I'll see something in bright sunlight, but I'll just use what's left in the tube and try again. Even if there's a scratch, it will be dramatically reduced, and not visible without close inspection. I doubt that any driver would notice it if they didn't know it was there originally. This stuff was so easy to use and effective, I never even tried the Novus 7100. Compared to the price and inconvenience of getting a new windshield, this stuff is gold!

I followed directions on how much to apply and time. Didn't really make a difference, only removed fingerprints. Scratches seemed more visible after the polish on my phone. Not worth buying this product.

Polly watch works extremely well on plastic, plexiglass et cetera. Just be patient it takes a little time.

First of all, this product is for vintage watches with acrylic (plastic) crystals. Do not use this on your smart watch, or modern mineral/sapphire crystal watches. For what it is intended for, the product works great. I used it on my vintage 1950's Jaeger-Lecoultre which had an acrylic crystal with many scratches. I'm so glad I found this product, because it made the watch look brand new! I was about to replace the crystal, before I found out you can polish these acrylic crystals relatively easily. Put a drop of Polywatch, then polish with the cloth over and over in circular motions. Wipe off the excess polish, and After repeating this process several times, the crystal looks flawless!

Many smart watches and newer traditional watches use mineral glass for the crystal. PolyWatch is too fine of an abrasive paste to refinish mineral glass in any reasonable amount of time. Where PolyWatch really shines is on acrylic and hesalite. This stuff works a treat for light scuffs and scratches. Deeper scratches and gouges can be polished out with several applications and some elbow grease, but it's probably better to use sandpaper and follow it with the paste. This pack with the microfiber cloth is a decent value and cleaned up my acrylic watch crystals, but I could have taken care of the deeper scratches faster if I used sandpaper first.

My glasses touched and subsequently scratched the lenses on my Oculus Quest 2. They weren't super deep but did affect the clarity of the image. I was hoping to polish out the scratches but no amount of rubbing was able to get them out. A little but not enough to be worth it.

It work ok - just ok for minor scratches

Some people like their watches NATURAL - scratches and all. "Don't change anything," they say. These are the people that probably barely use toilet paper at all. This product is not for them. This is for people that like their watches to SPARKLE! The sparkle people pay extra for the super-soft toilet paper, and maybe even the wet tissues just to be extra sparkly-clean. If that's you, then this product is for you. Just be sure to use it only on your watch and not topically or orally. I have an older model Rolex with an acrylic crystal. Acrylic scratches easily and mine had many fine, and a few slightly deeper scratches and abrasions. A few drops and 2-3 minutes rubbing as directed with the supplied cloth and it was as new. I wish I had discovered this product years ago! If you have a sapphire or "mineral" crystal on your watch, I wouldn't expect this product to work at all, but then if you did the crystal would only scratch with great effort.

المنتج لا يصلح الخدوش

Used this on my Oculus Quest 2 plastic lenses. All the scratches are removed, lenses looked like a factory new by the time I wiped off the compound. Apply compound to lense, use the cloth provided to gently wipe the lens in a circular motion for 2 minutes, and whola, perfect finish. If you are fixing scratches on VR headsets, look no further, buy it. BUY IT NOW.

What a find! I thought I had to replace the glass because it was all scratched. And now it looks like new!

It didn't work and scratched more than before. Disappointed 😔

Just use it wants but looks alright