amFilm Galaxy S7 Screen Protector, Full Cover Tempered Glass Screen Protector for Samsung Galaxy S7 (Black)

I got the Galaxy S7 on pre-order so was not too shocked when all the other screen protectors were too small for the phone, leaving valuable screen area unprotected. I was relieved to find this FULL SCREEN tempered glass protector, reasonably priced (cheaper than some of the other ones that don't fit properly) so took a chance with it. When it arrived I was overjoyed - it was actually the right size for the screen. Fitting was very straight forward and easy. Unfortunately I did drop my phone after having it only a few weeks, but I am pleased to say the screen protector did just what it was supposed to and although a little battered and bruised at the corner, there was not a mark on the phone screen itself. Because the edges were sharp where the protector had got a bit smashed, I opted to replace it with a new one, from the same company. Again, arrived in super fast time, and fitted very easily. Some people have reported issues with this screen not fitting with certain cases. I have a custom case (from Wrappz) and the protector fits perfectly with it. I have had no problems with the edges lifting (as others reported) or any dirt getting under the edges or corners etc. A top quality product, from a first class company who really do put the customer first and are so sure of their product they will offer a lifetime warranty with the screen protector (and yes they really do honour that!!!)

Edit updated review: TechMatte recently sent out an updated version of this screen protector for free. They have revised it and it addressed a lot of the old problems. The fit is much better tough I still get a slight lift on the top right hand corner of the case (my Spidgen Case is very tight though). The stick is better and no lifting in the center or annoying tapping noises from air underneath. Well done TechMatte. Old review 3 stars: Having used TechMatte's S6 case which I thought was brilliant I naturally decided to use their S7 case knowing that they make a good quality product. Fitting is perfect and it looks good, but if you have a case you may have an issue. I am using the Sprigen NEO Hybrid which is a tight fitting bumper case and it slightly lifts the screen protector rendering it useless as air gets under and it starts to lift and move about. The issues is it lifts the corners slightly, so I tried to squeeze under the bumper case which worked briefly, but resulted in a nice crack running along my screen protector - wasting £8.99 So if you do not have a case or at least a non flush fit case then go for this screen protector as I honestly believe it to be the best. I just need to find another cheaper alternative.

Fits with OtterBox Symmetry case, just make sure to install it bang on. There's about a 1mm gap between the rubber/silicone screen overlap of the case and the screen protector. They do not interfere with each other. The screen protector itself is fine to use, you'd hardly notice it is on, except for lack of sensitivity at the edges but this is similar for all curved tempered glass screen protectors. On my S7 I've got Lineage OS installed, and with that I can adjust the screen sensitivity to be higher and this then gives absolute precision by the edges and it's like there's no protector now. I think you can do this with the normal Samsung TouchWiz ROM. The clarity of the screen is really good, it doesn't affect the quality. Removed a star because finger prints and smudges are visible when phone is off. I've read where people have problems with the screen protector, but most of these people seem to not have installed the screen protector correctly it seems according to many reports. I installed mine very carefully and I'm really happy with it.

Although the protector fits well and also looks good, I have some complaints as well: - I've really tried my best, cleaned the phone with the attached accessories as much as possible. Even though when I applied the glass with the biggist caution, a small smear remained under it. It bothers me so much. I really didn't touch the phone's glass after the cleaning, neither tpuched the protector glass. Still the smear is there, cannot be removed anymore. It must have be on the glass already under the sticker. - Also sometimes when I use the phone, a small rainbow like ?bubble? appears in the middle. It becomes bigger and bigger, then it disappears. - The screen is now gleaming and reflecting the light much more than before without the cover. In sunshine it's extremely disturbing. - The screen is also less sensitive than before, sometimes have to click 2x or 3x. Anyways it's protecting my phone and looks good. Probably the best glass protector for this phone right now. I'm not sure yet if I will remove it sooner or later.

I found this brand a few weeks ago when buying some tempered glass for my Mam's S9. Like with their glass I bought then, both fit the S9 & S7 screen fully and seem of excellent quality. However, one difference I did find (apart from the obvious models differences) was when applying the glass. Whilst not a major problem, I did find that with the S7 I didn't get a plastic frame in which to fit the phone to help line up the glass. Whether the frame was something developed for the S9 (possibly also S8?!) after listening to customer feedback from those who'd bought it for S7 - I don't know. Afterall, the S7 is now 2 years old so unlikely to be a problem going forward for very many people. What pleased me the most about the glass for the normal S7 was the fact it did actually fit 100% of the screen. Unlike the first version I'd bought, which was by a different manufacturer yet had loads of excellent reviews/feedback (NOT TechGear who I used to like but can't seem to find listed for any recent models). When it fits the screen fully (like this does), it looks much better plus it doesn't cause viewing or typing issues. Overall, very pleased. Excellent manufacturer, seller and, service.

Fel storlek, passar inte till telefonen som den är designad för.

I did a lot of research on a good glass screen protector for the Samsung Galaxy S7 & the amFilm (owned by TechMatte) glass screen protectors are awesome!!! They worked very well with my Otterbox Defender case (which, by the way, I cut out the plastic screen protector of the case because I didn't like the "tapping" it made when touching the screen). I have been using this company for a year now and will never go with anyone else! Super easy to install (the company suggests you do the installation while in a steamy bathroom so as to prevent dust particles from getting on the phone), no halo effect (you know - the goofy rainbow you see on some screen protectors), it did not effect my touch screen sensitivity at all, I have never had problems with any of them popping off, and their customer service is OUTSTANDING! I have dropped my phone multiple times & only a couple different times did my screen protector break (but that is normal & it did what it was designed to do - protect my phone screen!!!), but all I did was shoot customer service an email and within a day they responded (bonus points: they are super friendly) & sent me a new screen protector, free of charge (a lot of other companies will charge you shipping). Their warranty offers TWO free replacements for the life of your product - not 1 month, not 1 year, for life! Let me also stress how well these work - someone got a hold of my phone and repeatedly hit the back of it hard against a bedpost (don't ask) &, yes, it cracked the screen protector, but my phone screen was perfectly fine! It did it's job & did it well!! I was sold on these after that! I recently upgraded my phone but plan on purchasing my screen protector from this company!

I just received this in the mail. I bought it mostly based on a YouTube video saying that it is the best screen protector for S7 and watched as he very quickly applied it and typed out a message perfectly. I do not understand the negative reviews. I opened the package which included a simple 4 step instruction guide, a wet wipe, a dry wipe, and a small cloth wipe. Directions say to use wet wipe to clean screen and dry wipe to dry it. I did this and it took about 30 seconds total. The wet wipe smells nice and immediately removed fingerprints without having to scrub at them. Directions then said to line up screen protector and set down gently. I used the openings at the top, which line up perfectly with your speaker and camera hole. It was perfect on the first try and only took about 10 seconds to line up. It is NOT difficult to apply for someone without normal hand coordination and balance. I'm not sure why others had a problem. Then, as per directions, I pressed around the edges to get a good stick. Afterwards (not in the directions), I pressed firmly throughout the middle of the phone, to make sure the glass was close to my phone screen. I then used the wet wipe to remove those fingerprints. It looks amazing, and as others have said, it does not look like there is one on your phone. Since so many said that their phones were no longer sensitive to their touch during use, I was a little nervous at this point. I had watched the guy in the video use his immediately with no problem, so I just decided to text my friend about my new protector. I typed out about a paragraph, including words with the letter "p". That seemed to be the most common issue with lack of sensitivity, along with the Zero. So I typed a few "0000" and then backspaced to remove them. I sent the text. I then checked to see if there were any mistypes or missing letters. There were not. So my sensitivity, as far as I could tell, was exactly the same as before I applied it. There is a setting on my S7 to adjust the touch sensitivity. It was set to the highest sensitivity when I got it. I wonder if the problem for others is because they had lowered their sensitivity at some point in the past, and that is why they had problems after applying it. It did not interfere with applying my new lime green Ballistic case. Time to go show it around town. Expecting all my friends to be ordering one by the end of the day. =) UPDATE: After a couple days I lost sensitivity and now I have to push very hard on areas around the edges. It is extremely hard to type. This seemed to coincide with the time my new case arrived. I found other reviews where the opposite happened.... Low sensitivity when first installed, but getting better over the next couple of weeks. If I press down hard around the screen like when I first applied it, the sensitivity is better for a little while, but still not as good as when it was first applied. It may be that the case is causing it to lift up or something. I will try using it without the case again for a few days. I will update if I figure this out. UPDATE: THE PROBLEM WAS MY CASE. Without the case on it, the sensitivity is fine. Easy to type, doesn't miss a letter. I inspected my case and noticed that the seam edge that touches the screen edge is sharp and protrudes slightly. This was obviously sliding under the screen protector and causing the loss of sensitivity. I sanded off this sharp edge on the case, and put it back on my phone. Now there is no problem. I reaffirm my 5 star rating for this screen protector.

The trick is to let it set for 24 hours before putting a case on the back. we were fortunate to get a great deal from Verizon on Black Friday and upgraded form the Samsung S4 to the Galaxy S7. I read reviews about how most screen protectors "only" cover the flat area of the screen and those that due cover full screen, edge to edge, are not case friendly. But, this is case friendly and does cover edge to edge with just the slightest, almost invisible space between the curved edge and the protective case. I applied the screen protectors to both mine and my husbands' phones before we had activated the phones even. My steps for bubble free installation are: turn off heat or AC first, so there is no chance of fans blowing dust in the area during the process. I spray warm water in the air, yep right into the air above the table surface to reduce the chance of dust floating around. I then follow the book application method (lay the screen protector on to position it correctly, then apply dust/hinge tape around one side to secure the protector in place stays in place, before cleaning the screen and removing the film on the protector. There are you tube videos to show this and explain it better.) This time of course I had new phones that were flawless and not in need of cleaning, so I slowly removed the thin plastic cover on the phone. Slow is the key word, rapid removal will only suck dust from the air onto the device or onto the screen protectors inside cover. I then slowly removed the film off of the screen protector, used a high power flashlight to confirm that there was still NO dust on the phone and then slowly folded the book cover. There was literally not one single bubble on either phone. I was a little off on one phone and gently lifted the glass protector to re-position, and it was still flawless with no bubbles. I then carefully pressed down, especially on the sides with a microfiber cloth and left both phones to set "SET" for 24 hours. During that time I would occasionally press down on the covers of each phone, especially pressing down on the sides of each device. After 24 hours by husband was chomping on the bit to activate and play with his new toy/device; so I carefully applied an Otterbox Commuter to the back of his phone, and a girlie girl Speck candyshell cover to my phone. The screens are protective, I do have to press down on the screen a little firmer on apps, but it was quick to get used to that and I don't even notice it anymore. Small price to pay for protection. I'm easily able to drag an app to the edge of the screen, to position it onto the next page. It is a perfect companion to my S7 and I highly recommend this glass screen protector. I am Not a "reviewer", I did not receive a discount for providing a review; I paid full price like most people do; but I am so happy that these cases we bought really do work well with our S7 phones and wanted to share that with others hoping to do the same thing.

Very easy to install with clear instructions. Everything need to prepare the phone is included. Once installed, the protector looks good. It's a little more reflective than the original glass but not too bad. Light transmission is reduced by a whisker but it's not noticeable after a bit of use. Feels good to the touch, with swipe typing easy. Touch sensitivity was not effected much. It's a good protector.