WARNING: Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) Purchase a set of shorter studs and replace them with the factory studs.
3) The back of your wheels need to have the open slots (cavities)(at least 2" width and 1/4" deep) between mounting holes for installation of these spacers.These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing.
Compatible for:
1995-1998 Nissan 240SX (Will NOT fit Base Models)
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2024 Nissan 370Z
2002-2024 Nissan Altima
1995-2024 Nissan Maxima
2003-2024 Nissan Murano
2008-2024 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2024 Nissan Sentra
2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
2013-2024 Infiniti Q60

Important Notes
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Buyer's need to measure the length of their vehicle's OEM/Factory wheel studs, to ensure it doesn't extend past the surface of the spacer
- Installation should only be performed by a trained professional.
- Make sure you get 6-8 FULL TURNS of the lug nuts before tightening
- Avoid using an impact wrench; improper usage may cause damage to components
- Check and re-torque all lug nuts after 25-50 miles of driving

Manufacturer	ZY Wheel
Brand	ZY WHEEL
Item Weight	8.93 pounds
Package Dimensions	15.2 x 7.95 x 4.49 inches
Is Discontinued By Manufacturer	No
Manufacturer Part Number	ZY-002BK
Special Features	1. About The Thickness: Please measure the Fender Gap (shown in the left picture), this decides the thickness range should be fitted. To avoid rubbing, the thickness of spacers should be less than the fender gap. For example, if your fender gap is 3”, It is better to choose spacers whose thickness is less than 3”., 2. Please ensure that the your vehicle has the same Studs as what's supplied with these wheel spacers, otherwise you will need to purchase the lug nuts for proper installation., 3. The bolt tail should be flush with the surface of wheel spacers, If your OEM studs are longer than the thickness of the spacers, there are several ways : - Short Your lugs studs by grinding them down - Or Replace your studs will shorter studs - Or if you wheels have cavities in the backside, between the mounting holes, then it will be OK (make sure it is flush )

5x4.5/5x114.3 20mm (0.8") Hubcentric Wheel Spacers 4pcs 66.1mm Bore 12x1.25 Studs Black Compatible for Nissan 240SX Sentra 350z 370z Altima Maxima Rogue Murano Infiniti G35 FX35 FX50 Q60

Details

Description

Specifications

Common Questions