amFilm 3D Curved Tempered Glass for S22 Ultra Screen Protector Samsung Galaxy 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner and S Pen, Upgraded Easier UV Gel Application(2 Pack)

First, I have used several brands of screen protectors. There are basically two kinds. Ones like this that bond completely to the screen, there are only a few of this type or ones that use adhesive on the edges. Most of them are the second type. The quality of that second type vary greatly. Their customer service policies also vary greatly. Most of them are very hard and difficult to scratch with metal objects like keys, a few use cheaper glass that scratch easily. They vary in thickness, so some crack more easily than others. Some are cut accurately and fit well, while others can interfere with the camera or haveclios that catch on clothing or even skin. But there is one thing they all have in common, they leak moisture. Some will get moisture under the glass just from facial sweat. Some will get moisture if you drop it in a full sink or a swimming pool. ALL of them will flood of you go into the water with them. I fish and go rafting. Every screen protector I have had has leaked if submerged for more than a few seconds. This screen protector, which is bonded to the screen, does not leak, even if I take underwater photos with it. But there are more advantages with this type. If the screen is adhered only on the edges, there is a tiny airgap between the protector and the screen. This makes the screen less sensitive. This may not be a huge issue if you are just tapping, and even swiping will usually work, but if you have a pen, stylus, or finger print reader, it gets worse. Most people eventually do recalibration and adapt themselves to the loss of sent sensitivity. HOWEVER, that tiny gap also creates an impact with the screen and some types of drops will still break the screen. Without exception, I have broken the screen on every phone I have owned over the last 10 years. Some look asted a month, a few lasted a year, but because of my active lifestyle, I have never traded in a smartphone without damage... Until now! The bonding agent on this screen protector remains slightly flexible. I have dropped my Samsung S22 Ultra countless times. The phone is still perfect. The screen protector itself lasted over a year and a half. Eventually it cracked. But bits of the protector remained on the screen and continued to protect it until I was able to replace it. Removing the old glass was simple and I think I may have spent 20 seconds removing all of it. The bonding agent remained on the protector and the phone was spotless. I put a new protector on using the cleaning pads in the kit and no further effort was necessary. Nothing has ever worked as well as this. I can't speak for the Whetstone brand, Wich uses a similar technology as I have never used that one, but thisisthe best I have ever used. The curve is perfect to my phone. The cutouts are also perfect. There is a a fraction of a millimeter margin between the protector and the phone frame. It is very tiny and allows you to attach a case.to your phone. In spite of some comments I have read, you will not notice it when you use the phone and it does nothing to compromise the protection. I would say the gap is about the the thickness of a business card. Once you are using your phone you will not notice it and not a single person who has handled my phone has noticed it. In fact one person after seeing the scratches on my phone case asked why I was not using a screen protector and I had to show them the margin which the had not noticed. Of course everything has a downside and this product is not an exception. That down side is the installation is not as easy or as fast as the other type and one must be careful to follow the instructions carefully. When I received my first kit, which includes two protectors, it was defective. There was not much adhesive is one of the tubes and no matter how long I waited or how I tipped the phone, I could not get coverage. I would estimate that the second tube had only about a third of the adhesive as the first one. On my second attempt, the tray would not release the sliders and when it let go it made a big mess and the bubbles could not be removed. So I had to contact the company. No problem. Perfect customer service and they immediately sent replacement glass and the supplies to install it. I had trepidation but it was unwarranted as the install was a snap. I threw away the old guides as the new ones were smooth and easy to use. Pros: Excellent customer service Nearly impossible to see once installed. Does not affect screen sensitivity. (I did not turn screen sensitivity on nor recalibrate). Will not flood. Superior protection Does not shed glass splinters if broken Cons: Installation required carefully following instructions Written directions could be written better (Definitely watch the video). Installation takes 5 to 10 minutes (Vs others which take 60 seconds) Not the least expensive solution available. So what will my next protector be? Without any doubt, this one again. In my estimation it is worth the few extra minutes and the extra cost.

I've tried many screen protectors over the years, this one is leaps and bounds better than its competitors. I watched the installation video 3x. During the process, I was doing this on my office desk and my cat jumped onto my lap at the worst time, (this 3 legged cat wanted to help) got the UV adhesive everywhere but on the screen. The way you remove the UV adhesive if it gets on the floor, if it dries, is with the UV lamp. But mine got on the floor via a freak event, totally my fault So I tried it again but his time on a granite countertop with my 3 legged buddy on my lanai. 2nd time it went flawless and it came out prefect, I didn't need to recalibrate the fingerprint reader, thanks to the kits installation metal fingerprint dome cover, this kit is well thought out and the mechanism to instal it is simple to use, and idiot proof if you follow the instructions, but not curious cat proof. No bubbles, no flaws, you cannot even discern if it has a tempered glass cover, nor does it compromise sensitivity, the S-pen works in normal and air mode at the same distance as without the screen protector. I asked amFilm if they would allow me to buy two more tubes of UV adhesive for future use since this was a two pack, instead they sent me a new kit, what a great company (and product) PS I needed a quality screen protector, as I just bought a stingray cellphone case, normally I use a Otterbox Defender Pro. While this stingray case is stunning, it offers almost no protection, so this tempered glass screen is needed. My newly adopted 3 legged cat is sorry he screwed up the first go, but cats do what they do.

Once this product is installed correctly, it looks and works perfectly. I have no bubbles, no dust, and no areas where the protector is not securely adhered to the phone. After a month of heavy use, and a couple of small "oops" events, the screen protector is still tightly adhered and shows no visible scratches. I removed one star because the installation process is a bit tricky. I was glad the package included two protectors since the first was lost learning the "gotchas" of the installation process. So, what went wrong? Slightly different things on each installation attempt. I'll share the experience so you can benefit from my mistakes. First, follow the directions carefully and watch the video. This review is not intended as a replacement for them. FIRST ATTEMPT The biggest problem was that the first protector did not drop easily onto the phone. This one wasn't my fault. There appears to have been a very slight manufacturing defect in the first protector causing it to be too big (almost microscopically) to correctly fit the tray. Next, I should have more carefully leveled the phone. If the bubble is not PERFECTLY centered the adhesive will tend to flow toward the lowest side of the phone. The process is unforgiving. Unlike me, you should take this step VERY seriously. Getting the drops of adhesive to land in the correct locations is also a bit difficult. There is a tendency for the dropper to move off-target slightly when you are unscrewing the cap. This is especially true when the cap is on extra tight. SECOND ATTEMPT This time almost everything went perfectly. However, one of the absorption pads was slightly too large to fit its slot. I was forced to reuse a pad from the first attempt. Also, I was still a bit off target for the adhesive drops. Though, in the end, this didn't seem to matter. WHAT I WISHED I DID WITHOUT removing the adhesive covering, test that your selected protector falls freely into the guides of your tray. If it does not, use the other protector. Check that the absorption pads you have selected both fit easily into the slots on your tray. If one does not, pick another one. Do the above BEFORE you start the installation process. Basically, you're just double-checking the quality of your parts. Hopefully, you'll be lucky, QA will have improved, and it will be unnecessary. Be compulsively careful and accurate when leveling your phone! It really, really matters! While applying the adhesive, hold the applicator in the correct location and try to very slightly loosen the cap without removing it. Basically, just get it started. Assuming the contents did not spill onto your phone, carefully reposition to the correct location and continue loosening the cap until the liquid spills out. I suggest this step because if the cap is extra tight, getting it started will likely cause you to drift off target. FINAL THOUGHTS I hope this helps. Once installed properly, the protector is excellent. Over the past decade or so, I've probably installed about 10 different protectors. Despite being tricky to install, this product produced the best end result I've seen by far!

TLDR: Excellent, very high quality screen protector, 100% recommend, but you MUST FOLLOW INSTRUCTIONS! My biggest criticism: adhesive buildup did fall off of the applicator nozzle and into the adhesive bubbles, but that problem was easily fixed fishing it out with toothpicks. This screen protector is excellent. The tempered glass feels very similar to the s22 ultra's gorilla glass, and there's ample room on the edges to accommodate most if not all cases. You have to follow the instructions exactly! It is absolutely essential to make sure the screen applies correctly and that the application lasts. Every piece of dust must be removed, and after making sure the screen was 100% clean, the application process went very smoothly. Another thing, there may be adhesive buildup around the nozzle of the applicator that can fall off and sprinkle into the adhesive bubbles, so clean the nozzles before using them! But if it happens, use toothpicks to fish the pieces out, I did so and got excellent results despite the hiccup. Again, make sure every single piece of debris is removed from the screen, small pieces of dust that you miss will inevitably make their way in, but that's unavoidable. Another tip: add another 30-45 seconds to the last half of the curing process to ensure the adhesive cures fully. Long story short: pay attention, be meticulous with following the instructions, and you'll have an excellent experience with this screen protector. Bubbles are often due to user error/missing debris that have fallen onto the phone prior to application, and lack of adhesive durability may be due to inattention to the instructions of the curing process, so eliminate those variables as much as you can. You have to be very precise and follow the instructions exactly. For the fingerprint sensor, as expected you will need to reprogram your fingerprint for the best results, and press with a bit more pressure when unlocking your phone, but it is something you do not notice after a day or two of regular use.

I've pasted Whitestone dome glass on my wife and my s22 ultra the first day when we got the device, and is having fingerprint unlock issue since then. But because of the premium price we've paid for the glass, we thought to turn on face unlock instead and let the glass stays on the phone for at least 5-6 months before we changed to another one. However, the fingerprint unlock issue had been such an annoyance that I changed to a local brand, which many reviewed that the fingerprint unlock works, but it doesn't worked for me. I bought two pieces, one for my wife and one for myself, end up I used up both pieces, they are not any better than the Whitestone dome glass. I saw amFilm while searching in YouTube on reviewed for tempered glass installation for s22 ultra, and decided to give it a try. Amfilm didn't disappoint me, it is definitely the best ultrasonic fingerprint unlock compatible tempered glass you can find for s22 ultra! I found that the unlocking speed is no different from naked screen, I'm so happy that I bought amFilm! 😄

Fingerprint is working as mentioned.

Es excelente el producto, bien puesto pareciera que no trae nada el celular. IMPORTANTE! Poner dos botecitos de pegamento a cada cristal, de lo contrario se despegará al poco tiempo. Recomiendo ver la guía de instalación de YouTube de DOMEGLASS y no la de este producto, porque van a quedar burbujas, no presionen la zona de la huella con nada porque marcará error, ni siquiera con la pesa de metal que viene en el kit, mejor dejen que se seque bien unas 8 horas antes de presionar el sensor, ya con eso no tendrán problema alguno.

Great screen protector. Works well and although there's a lot of steps in the process, it was quite easy to apply it. One has been in use for 1+ year now and has only started cracking/peeling recently, although I want to point out this user has dropped their phone on tiles many times. The second one has been in use for 3 months now and not a single issue.