Tub Guard Anti Slip - Clear Bathtub & Shower Grip Textured Non Slip Coating for Slippery Tubs or Shower Floors - 1 Gallon (90 Tubs or Shower Pans)

Great non-slip product. I split the 2 oz. bottle between our shower and tub by applying it only to the likely areas of slippage. Couldn't be easier to apply - just pour a little and spread with the included roller. Important - for me anyway - the initial application seemed way to rough, maybe even a little sharp, to walk on so the fix was quite easy. Just make a sanding block with a 6" or so piece of wood, like a 2x4, wrap a sheet of coarse sandpaper (40-60 grit) on one side of the wood block, and sand off all the rough/sharp spots. Super quick and the final result is terrific. Don't let this product slip away. :o)

Easy to apply and works as advertised once dry. Definitely adds protection from slipping. Hopefully it will last. I would recommend this brand.

I am thoroughly impressed with this product, I purchased it because the finish at the bottom of my cast iron tub was completely gone from my Fathers shower seat when he was alive, every time I used the shower the porous finish would absorb in my dirty foot prints and it was a bear to clean. The first two photo in my review were from after I cleaned it but before using this product, I actually bought a competing product to refinish the whole tub, but the 4 DAY wait until using again vs 4 HOUR with this product and all the extra work to do the whole tub had me QUICKLY CHOOSE THIS PRODUCT. I was a little worried if the White I bought would cover but it did, I was also worried if it would be too tough to take baths - I have arthritis (it was a little rough at first but after a few baths my tender butt and back were fine) It’s been 3 weeks and I can say I am very happy, I have a metal suction cup shower holder that has fallen 4-5 feet and it has not damaged the finish, so it’s tough and durable, and best of all it blends in and does not look like a patch job. If I was to be critical the White comes with a separate activator bottle and I wish it came with just a little more activator or a better way to apply it than my hand with a rubber glove, it does evaporate and it makes it tough to know if I covered the whole area - but to their defense I did a large area on my tub and probably more area than intended (had plenty of product itself) I am extremely happy with the finish, look, durability, effectiveness of the no slip, and could not be happier with this product!!!!!

Bought to cover a plastic/fiberglass tub with a non-smooth bottom to which no tub anti-slip mat would stick. Decided to give this product a try. Followed the directions for installation (which were not very hard) and the application went on without incident. It dried for 8 hours and the results are a fine-grit surface that definitely gives very improved grip for wet and soapy feet. My feet feel very secure stepping into and out of the tub, and while showering my feet always have a solid grip with soap and water present. I like this much better than a mat. My only open questions are durability and how it cleans up. Remains to be seen, but initial look is very good. Am going to use elsewhere for sure.

This is a win. I didn't want a bath mat that either has to be removed constantly (mildew) or the adhesive strips. I ordered the larger size, just so I wasn't stressed about not having enough (I did use about half the bottle, so the coverage may be right on). After shaking then applying with the supplied roller, I was a bit surprised at the "frothy" consistency - but the end result was great. Definitely gritty and textured enough that no one will slip in the bath tub now! Definitely appears "clear" - no color tinge whatsoever. Will report back as to durability - but at 3 days later, I'm very pleased with this!!

I bought and applied this product 2 months ago, being sure to follow the instructions. It was easy to apply. I allowed over 24 hours for it to cure/dry/whatever it has to do. Worked great with a surface that's not unpleasant on the feet while at the same time making the surface of the tub slip-resistant. I've avoided all the cleaning products they advise again, and here we are 2 months out and the product is starting to peel off the tub. I figured it would eventually do that, based on other reviews, but I didn't think it would happen so soon.

I first bought this product and applied it to the bottom of the bathtub. It worked very, very well, lasted about 1 1/2 years, and cleaned easily using liquid cleanser. It was also easy to apply. I used green tape to make 3" x 3" squares instead of applying it to the entire surface of the bottom of the tub. It finally started losing it's grip, so I was very thankful that this product was available for a new application.

Whether this product works as described or not is irrelevant to me because you don't receive near enough product to cover the needed area. They claim a 2 oz bottle covers thirteen square feet and my shower is less than 9 square feet. I let the bottle sit upside down and drained every spec I could get out of the little bottle and, as you can see in the pics, it wasn't nearly enough to cover my shower floor completely. I estimate it would take about twice as much product as supplied with the kit to do so. I scrubbed the shower very aggressively and let it dry over 24 hours before applying the product. The shower floor does have some discoloration that is impossible to clean completely but one of the purposes of this product, in white, is to cover things like that. It definitely does not...not with the amount of product received. For the cost of this coating there is no excuse for not supplying enough to cover the area the website claims it will cover. Waste of money as far as I am concerned.