StarTech.com 42U Server Rack Cabinet - 36in Deep - Network Rack - Server Cabinet - Computer Rack - Server Enclosure - Equipment Rack

Nice rack, good quality, i like that you can remove all side for easy cleaning and accessibility. Came on a pallet during delivery, so delivery was easy too and it was undamaged

Perfect size and well built. Wheels are really smooth. For the price it's pretty good. It did come with a dent in the front, but I'm sure the seller would have fixed or replaced it no problem. Amazon offered a discount which I gladly took and I'll bang out the dent myself. Very happy with the customer support. The rack will come mounted on a pallet relative to its size, so make sure you have the tools to rachet it off the pallet. With that said, you might have to do that so it can fit through a normal door so it doesn't sit outside.

I almost went for the far cheaper open 4 frame rack from StarTech but I really like the fact that this rack is built more robustly and boy am I glad I went for this instead of the 4 post open rack. No wobble, no racking back and forth, solid as a rock, modern design (zero u space), just high quality all around.

I was very pleased when my Server Rack arrived, as it exceeded my expectations. The rack is solid and relatively easy to put together. My rack mount servers fit in perfectly without any issues or special adjustments to the rack. I did have a few minor issues with installation, and hopefully these stories will help someone: First, the phillips screwdriver provided (I didn't even realize it came with one, so bonus) was more of a sharp tip instead of a stubby tip; this meant my personal screwdrivers worked better for most of the screws used in installation. Second, the bottom tray pieces were extremely difficult put in, as those particular holes were not pre-threaded. This meant forcing the screws to thread metal. Additionally, I had to move the rack-stand bars out of the way to ensure I could get enough force on them. Third, the top cover panel didn't quite screw down properly all around; one corner was always off. I ended up taking a Dremel to one of the screw holes on the rear side, opening it up enough for the screw to fit properly. I believe at most it was 1/8" I ended up grinding off. Fortunately, the screw covers it up, so it's not even visible. Lastly, There was a small plastic protection film on the key-turn portion of the lock (just the little circle). At first I thought it was just some brushed blue metal to give it a neat look, but I started scraping it off after using it. I prefer to remove all the protective plastic once I get an item in place - this one however required me to disassemble the lock to adequately remove the sealant. This was because the seal covered the sides of the lock as well, which were covered by the handle. This wasn't overly difficult to do, but someone unfamiliar with basic locks might have some difficulty removing this. If you read all of that, it sounds like I ran into a lot of problems - but realistically they were all very easy to solve and didn't detract from the overall quality of the server rack. After minor installation hiccups everything is working great and my servers are happy to be finally sitting in a rack where they belong.

Tutto bene, solo le istruzioni poco chiare (non per l'inglese bensì per le immagini a caso). Materiali di pregio, rifiniture ottime. Direi perfetto. Consiglio anche le loro slitte per UPS o componenti per rack. ;)