1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

Fais ce qu'il doit faire.

I plug this into the USB socket of a car jump-start battery to charge model airplane batteries. It works well. The flashing that indicates a live socket with no battery is fast and a little hard to see in sunlight. Green indicates charging, which is easy to see. No LED indicates that charging is complete. Not really a problem, but it'd be better to have a different color or a different flash rather than nothing. At the price you really can't fault it. My wife is going to like it because it doesn't emit a loud beep when the battery is full.

day onewas OK butbday two, plugged in two3.7voltb 400mah batterires got red chzargevlight followed by a puff of smoke and the piece of junk quit dead as if I shot it

Worked great! I plugged in 3 new 1S 150mah LiPos and they were done in about 1/2 hour. Used the .2 a rate which was easy to change with the dip switches. It seems to be a great value. I might just get another one to take to the flying field for the price.

**I would recommend some knowledge of batteries, and a multimeter check before use to be safe! ** This thing is working great for me and charging my batteries for my LoRa boards on the go. The charging ports are very secure and there is no worry about them coming apart when removing or if a battery dangles while charging (though I don’t recommend this). The usb connection is also very strong, it does not wobble. While the quality of the board does not feel “quality” it does not feel like junk either. The soldiering is not perfect, but it works. I have done worse jobs myself. Summary: I wouldn’t throw batteries in this and leave the room, but is a great solution to bulky converters or an expensive set up to someone new to a hobby that uses these batteries.