YZF18-25 Electric Fan Shaded Pole Motor 120V 60Hz 1.01A 18W AC Fan Motor for Small Ventilation Equipment,Refrigeration Equipment Radiator Evaporator (YZF18-25)

Exactly as expected. New motor in perfect condition. The only issue I had replacing the old with the new was the old one had a wire connector and the new one didn't. The connector clip was broken so I couldn't move the old wire/clip to the new motor. I didn't have a new clip handy so I just hard wired it back into the fridge instead. Works perfectly. This item was a great price and was actually delivered early which helped my customer save some money on food he thought he was going to lose. Highly recommend.

Perfect fit, quality made. Highly recommended.

Had to use the back of the old motor and replace the bearing from the new on and install it in the old case to use the threaded mounting brackets...

Worked like a champ.

The installation is simple, incredibly simple. My wife watched me do it, and she felt like she could do it herself.

I bought a used Dollar General three door True freezer for bulk food storage. The unit had both evaporator fans not functioning. I priced True replacement units at $401 each. Reading reviews here, I knew the top mount holes weren’t drilled and tapped. That’s an easy fix, remove the end plate drill the three mounting locations with 9/64 drill bit tap with a 10-24 tap and use 10-24 screws that are 3/8 in length. The freezer works flawlessly now for $108 in stead of $802 for the fix.

I have a commercial 3-door reach in freezer. Fan motor went bad. I contacted manufacturer directly to get replacement part and I was told it would be $357 to buy it. I gambled and ordered this instead and it turned out to be the exact same part that was originally installed. I was able to install it myself and saved almost $300. My freezer model is Admiral Craft GRFZ-3D.

It's worked fine

work good thanks

Doesn't come with any blades. It would have been nice if they provided dimensions for the mount which would have made printing up a test blade easier. I used 32mm diameter for the hub, 3.5mm diameter for the holes, spaced 12.5mm on center from center of the hub. Center hole of 4mm diameter. You can hear three things in the video, the whoosh of the air displacement, a high pitch noise from the motor walking on the wood, and a hum from the motor. All in all it's very quiet. It also seems to deal well with back pressure ok. I haven't finished designing the enclosure, but the reason why the motor is walking in the video is that I reversed the blade and it's trying it's best to fly. With properly designed blades it might actually lift itself. No wobble or pitch to it, seems well balanced.

Original mounting holes and propeller match this motor. Also increases air flow with slightly more current at .8A

Love when Theoren bell rings& it has arrived. Have been using same motor type, works real well.

Purchased to replace a squealing fan on our walk in commercial fridge. It was a different brand than the original but fit perfectly and isn’t squealing like a pig. Lol