Double Din Dash Kit Aftermrket Radio Install Compatible with Jeep Liberty 2003-2007 with Premium Infiniti Sound Systems

Exactly as I expected, nice, tight fit

Great fit, looks good in the jeep, and fits a sony xav-ax100 head unit. You will have to trim plastic dashboard structure to fit a double din unit. I also had to mess with the retaining clip for the hazard swich, it interfered with the top of the head unit. Not the fault of this kit though. The wiring harness was almost plug and play to my head unit. The Sony does not have RCA input jacks, but its nice that the harness provides those as an option. I had to cut them out and solder to the sony harness directly. Antenna adapter was perfect. The one thing I wish this kit would do differently is to provide metal brackets to mount the head unit to the dash where the original stereo was mounted, and not to the bezel. The weight of the head unit pulls the bezel down a bit from the top edge, and puts what looks like a lot of strain on the bezel itself.

This made the installation almost pain free. The bezel and mounting hardware were perfect. The AM/FM adapter was perfect too. The ISO adapter harness, not so much. Really not sure where they were trying to go with it. But anyone who can't get around that minor issue shouldn't be doing this anyway.

I hate to write negative reviews but this item has some issues. As many have said…don’t expect a double din head unit to fit. You will be cutting this piece (a lot) to make the head unit it fit. At one point, I was thinking if I knew it was going to require this much cutting I should’ve just modified the original part and saved $47. Based on your skill/experience you may also have some rough edges which spoil the look of the finished installation. I had to buy some black adhesive trim to make the install look better. The wiring harness also didn’t fit my radio so I had to buy another actual radio harness adaptor to make it work. Lastly, the raised bosses for the climate control module wasn’t threaded with the same pitch or thread size as the factory screws. So I had to find new screws that worked. On the positive side…the part does look factory and it does snap in to the stock dash nicely. I’m happy with the finished product…but it was a project.

If you want to do this make sure you know what you are doing or have a professional do it it’s kinda ruff to do and I took a good chick out of my finger getting some of the metal you need to remember to get the new radio in

See use fit just like it should, and follow the instructions

Mounting this was easy, but not fit 100%

The Good included a good fit for the dash panel and secure attachment for the Pioneer head unit that was being installed installed though the opening will allow only a recessed head unit mount. The antenna adapter is functional though apparently completely non-removable once installed. The Bad list is too long. There were absolutely no instructions included with the Custom Install Parts Jeep Liberty Dash Bezel with Premium Wire Harness. It was completely devoid of any printed materials. When instructions were requested, they were sent via iPhone that failed to allow them to appear in my Mail app. When they were eventually served up with a bad attitude, the Word doc that was attached had improperly formatted pictures taken off of Photobucket. The text on the illustrations was truncated on the right side so they were not readable. There was no PDF file as the seller claimed and the txt file that was included did not remotely match the “Premium” wiring harness. (The Premium kit has RCA fittings and the txt file was for solder connections.) To make matters worse, this harness does not even work with a system that does not have an external preamp. A Scosche wiring harness kit had to be picked up to complete the job. The Ugly is either a lack of or very limited knowledge on the part of the seller about the normal head unit install in this vehicle. The misformatted instructions were totally inadequate to complete the job. In reality, the entire factory radio support attachment must be removed from below, behind and above the opening where the new 2 din head unit will go. The length of the Pioneer units (and many others) prevent their being installed with this dash bezel without the removal of the glued on support that is attached to the molded air ducts under the dash. It would be easy to damage the air ducts when forcing the breaking of the glue joint that attaches this support bracket. This is not mentioned in the limited instructions. Because of the molding on this bezel, the head unit must be mounted in a recessed position relative to the front of the bezel. That dictates additional room in the rear to allow a fit thus requiring the complete removal of the factory brackets. The side brackets, contrary to the instructions, can remain in place for the install. Overall, there are as good or better solutions here on Amazon to installing a 2 DIN head unit in an 02-07 Jeep Liberty and all of them are less expensive. If I were ever to do the task again, I would go elsewhere. This was not a good purchase.

Top notch

Excellent quality and finish. My double din 7” stereo fits perfect, looks factory. Would definitely recommend this product.

Le quedó a la perfección a mi estéreo y mi auto luce increíble

Fit great

Lo mejor fue el trato con el proveedor. Todo muy bien, Compatible para un Jeep Liberty 2007. Lo quise para un reproductor de pantalla de 7" pero no quedó (el problema es del aparato, no del adaptador).