Dual Monitor Stand for Desk, Monitor Arms for 2 Monitors 32 27 24 22 Inches, Height Adjustable Double Monitor Mount, VESA Mount with C-Clamp & Grommet Base, Holds 4.4-17.6lbs

Easy to install (mostly) solo. Lots of options for adjusting the arms. Very sturdy, thick arms that are easy to mount, and look great. Highly recommend, especially for the lower price.

These monitor arms are great. While the setup process takes a bit to get it exactly right, it's easy to mount monitors on and they look really nice once everything's set. They seem really sturdy and the tension setting is really easy to dial in to get that exact right balance between stability and movability. The white also looks really nice on a black-and-white setup. Two very minor complaints with these arms - they do not include any sort of mounting plate to spread out the pressure on your desk from two mounted monitors. I had to buy two separate aluminum plates for the top and bottom of the desk, since it would have definitely pushed into the particle board and caused a permanent indent if I had not. The bottom is especially an issue - the mounting clamp only has about a 1" diameter metal plate attached to a screw that would have punched a hole into the desk had I not bought reinforcement plates. My second complaint is with the cable management covers - it includes two separate cable covers for the upper arms, and the tabs that attach them to the arms are really weak. I clipped it on and took it off three times during the setup process, and each time one of the tabs snapped off to the point where I just had to throw the whole thing away and use a velcro tie. So if you plan to use the separate cable hiders, just make sure you have your cables 100% set before you clip them on, because they might break when you remove them. Besides those two minor complaints, these arms work very well and look great.

This monitor mount is impressively sturdy once installed — no wobble at all, even with my 31.5" curved monitors. The build quality feels excellent throughout, with strong metal arms and smooth motion in all directions. Installation was mostly straightforward thanks to clear instructions, but the C-clamp design posed a problem. Despite claiming compatibility for desk thicknesses up to 2.36", the clamp maxed out with nearly half an inch of clearance left before touching my 1.25" desk. The hole pattern simply didn’t allow the clamp to reach low enough. I had to drill a grommet hole and switch to that mounting method, which worked well — but it may be frustrating if you're expecting a simple clamp-on setup. That said, once mounted, the arm freed up desk space and made my setup look much cleaner. It offers great functionality and flexibility, with solid support for large monitors and a full range of adjustments. I’ve only tested it with curved screens, but the mount seems versatile enough for a variety of setups. If the clamp fit your desk out of the box, this would be a 5-star product. For now, I’m giving it 4 stars for excellent performance and construction, with one point off for the misleading clamp specs.

Absolutely so easy to install. very sturdy and has great cord management, as well as screen movement flexibility. Very Very well made and great product.

The bracket it easy to install ( it took me about 40 minutes total) and it works well. It gives me a lot of additional room on my desk. It seems to be very sturdy . The price is very reasonable

This product is great and looks great! It functions very easily and where I want it, as high as i need it, it holds the monitors great, and it was easy to install onto the desk.

Very easy to install and adjust. Much easier than the $180 sets we use at work. Build quality seems good and on par with the work sets. Not sure about the longevity yet, as I just got them today, but I will update the review if they fail. If I haven't updated the review, then they are still going strong. I'm using a 23" & 21" right now, but plan to upgrade the 21" to 34" widescreen. They support my current monitors fine. We'll see how they work with the widescreen soon. Overall, very satisfied so far.

Update 05/24/2025 After having this mount for a while, I'm starting to have more issues. My monitors are on the heavier side 10 lbs each and they mount on the bottom center, rather than the usual which is centered on the back of the monitor. About every week I notice that they start to tip down and if I re-adjust they just tip again. I cannot tighten the screw anymore but if I over tighten it I can make it last again for another week before repeating. It's only going to last so long before the threads on the bolt are shot. Original review: Overall a pretty good monitor mount, the components feel solid and the materials are good quality. The instructions were easy to follow and get it setup. I do notice that when I type on my desk the arms / monitors shake a little bit and I can't adjust the tension any more so they are a little loose. I mounted it using the grommet mount, so it might be more sturdy if you use the c clamp but my desk isn't setup in a way that I can. I got it while it was on sale for $20 off so no complaints, I don't think I would keep it if I had paid full price for it though.

Lo recomiendo ampliamente porque es un producto de calidad que se adapta a tus necesidades muy bien. Costo, beneficio extraordinario!

27inchディスプレイを装着しています。アームを動かす際にかなり重いので、頻繁に動かすような使い方はあまり向いていないかもしれません。私は、ディスプレイはデスクに固定しているので、この使い方であれば、しっかりホールドしてくれていて問題ないです。コスパは良いと思います。

easy to fix, strong .. using 2 x 27inch monitors

Great monitor arms Currently using with a 32in and 27in display and they both got perfectly with no sag. Clamps onto desk with no issues. Has been a set up and forget product which is fantastic. Don't even need to think about it, cleared up plenty of desk space and am easily able to move monitors around if needed. Would recommend

It was a easy to build but the tighting was the worse part but still good 👍🏻 recommended