P.65C3 3-Way Power Class 6.5 Component Set

These 3 way components are incredible. Currently I'm running these in the doors, no speakers in the back(it's a coupe, no point in rears), and a 15 inch Rockford p1 subwoofer in a custom sealed enclosure (about 1.6 cu ft box). I push these with a 5 channel boss amp 3700w(lol inflated number) and they really shine all the way down to about 120 hz. I hope you like mids! These are very mid heavy so they have pretty good vocal clarity, and the tweeters shine pretty well. Now for in depth: Crossovers: very good size profile, probably about 6x5 inches. Easy to mount in doors as they provide screw mounting holes on the board. These crossovers allow a -3db pad on the tweeters which is very helpful initially as I found the tweeters too bright for my tastes. This crossover also allows you to disable the mid. Overall the parts are pretty high quality, caps look like they'll last awhile, the board is thick to prevent shorting on the back, resistors are mostly high wattage ceramic, which are great for higher power systems. Tweeters: interesting design on these. I found these too bright during break in so attenuated them, but then later decided to bring them back up. This is likely just perspective, but they seem to darken as they break in, making them less jarring. Overall seem very clean and capable of wattage. Mids 4/3.5 inch: these leave a bit to be desired and I'm considered changing them. They provide good mounting with 4 screws, but tend to break at higher wattages. These speakers will be the first to begin distorting if you're pushing to much gain into the crossover. Overall they sound decent, nothing spectacular but good vocal , snare drum, Tom, and guitar clarity for the most part. These mids seem to have a but if odd colourstion to the sound, but it's not too bad. Midwoofers 6.5 inch: these speakers are pretty wonderful. Note, you will have to provide your own high pass filter (many amps have these) somewhere between the 100 -200hz mark depending on preference. These speakers definitely fill up the bottom mid end very well, low guitar chugs and distortion, the attack of bass guitar, the attack of bass drums. If you were to remove these from the system it would lack incredible amount of depth. I don't have an amazing description of these but overall very clean coverage and connection to the mids. Note these are NOT subwoofers, and fall of rather quickly in the low end. Push connectors for wire hookup is very convenient. Overall: I definitely would buy these again, they respond to tweaking very well (especially allowing the tweeter attenuation and mid cutoff). To round these our you really do need a subwoofer if you want the low sounds, but no sound system is truly complete without a sub anyhow. I listen to alot of metal/rock/grunge and a little bit of rap on these and I think these are the best bang for buck audio I have ever heard, and far better than Bose! Sorry if any details are slightly wrong, I bought these about a year ago.

Sound quality is very good for the price range. They also get pretty loud. Mid bass also is not bad. I installed them on a Sundown 125.4 and it is more than enough power. (Only using 2 channels of the amp)

Replaced a well worn Infinity kappa series two component system with this. The three way increases the stereo imaging and helps fill in the bass gaps. This system really shines when you turn up the juice!!!!! I would recommend the kappa if you are powering through the head unit (no amp). This system is designed to be driven by an external amp, and has less sensitivity. The kappa is considerably louder at low input due its higher sensitivity but loses clarity at high volume with an amp. This is important to consider when shopping for speakers. If you've got an amp with proper sized speaker wires and like it loud, this is a steal! If you've got a stock or aftermarket head unit with factory speaker wire, you can't beat the infinity kappa. 99 GMC Sierra- The woofer is slightly larger in diameter. My angle grinder with diamond wheel easily made the slots to tamp the opening for a proper fit/ seal. I taped the opening the rubbed graphite from a carpenter's pencil onto the speaker frame. I transposed the markings onto the tape by pressing the speaker into the opening and cut accordingly. Worked like a charm!

I rarely post reviews, but I had a tough decision when purchasing these because there just isn't much feedback on the net about them. I can say that I had very high expectations for these speakers, and they have met them in every way! Absolutely blown away by how comfortably bright the tweeters are, tons of midbase and reproducing the full spectrum of sound with the three way setup. There are songs in my library I have had for ten years, and I am hearing things recorded that I did not know existed with these speakers. They are thirsty, and require more power than I expected to come to life so make sure you have them amplified close to their peak power capability. Bottom line .... if you can fit them, buy them - chances are you will be blown away by the clarity.

I purchased the product and received a defected unit. The company refused to exchange or refund.

Sound good for this price point. Not mad i bought them.

Sound is very good and very loud. I'm feeding these 200 watts each and they get pretty loud and sound great the whole way up. Only complaint is the woofer needs to be cut higher than the crossovers are cutting. If the song is heavy with sub notes up to 100 or so, they will distort. I am going active with an 8 channel DSP soon to eliminate this issue. they look really nice.

Fast shipping. Thank you. Very impressed with the sound. Very impressed with the build quality. The tweeter is amazing. Very happy I didn’t buy that $600 I was thinking about getting