UV Resin 1,000g - Crystal Clear Improved Ultraviolet Curing Epoxy Resin for DIY Jewelry Making, Craft Decoration - Hard UV Glue Solar Cure Sunlight Activated Resin for DIY Resin Mold, Casting, Coating

To be honest, I was very hesitant to purchase this after I read the reviews. I only ended up with it because it was the best deal on UV resin. I have started making jewelry out of recycled computer parts. UV resin has a much faster drying time than regular resin so that's what I really wanted. Granted I don't have a lot of experience with resin...well none before I made this necklace. Thankfully video tutorials really gave me the confidence to try it. It was really easy to use. The biggest worry I had was from so many reviews that said it left a sticky residue after curing. This seemed to be a really common thing. Well that wasn't going to work for jewelry I am trying to sell. After reading numerous reviews on here, I ran across one that suggested using a higher quality UV lamp to get it to cure correctly. That's what I did. I purchased a 36w UV lamp. As best I an remember I cured this piece on the 180 second timer. It worked perfectly. It wasn't sticky at all. I guess if you are on the fence about the purchase after reading the reviews like I was, just purchase or use a 36w UV lamp. It will work. I haven't tried anything more complicated than curing a circuit board in a bezel pendant. If I have any trouble in future products, I will update this review.

This bottle won’t cure properly. The last bottle I had was perfect. This bottle causes curling, and soft cures that causes pieces to be terrible with blemishes. The consistency is thin as well. It won’t self level as resin normally does. Since I ordered it as a back up, I didn’t open the box or try to use until the return window had closed. So I’m stuck with this very expensive useless batch of resin. 🤬

I've been testing out different UV resins and so far this is the best I can find! A few tips to address some points I see in reviews about stickiness and the resin improperly curing: - Don't bother with the UV light if you're making thicker pieces. Stick it in direct sun for 20 minutes or so (double if a cloudy day). The dice molds I use are silicone, they're slightly opaque with a cap on top to keep the resin contained and press the number into the top. I pop them in the sun for ten minutes on one side, then flip them over so the bottom can properly dry. - Use a heat gun to pop bubbles (or a pressure pot if you're fancy). Pour a small amount of resin, use the heat gun, rinse and repeat as necessary. If there's bubbles stuck in parts of the mold use a toothpick to bring them closer to the surface so the heat gun can reach them. There is a bit of a smell but it's not as strong as some other uv resins I come across, there's no smell once the piece is cured. Worked absolutely fine with dark pigments (see pics), though since I didn't use a solid color all the way through I'm not sure how well that'd work out for you.

Initially unsure of UV resin, I bought this from Amazon having experience with 2 part Epoxy resin. I bought it for smaller peices like rings and combs where thick, epoxy resin is aggravating. I enjoyed working with UV resin, it is so much less mixing and measuring. The curing is fast with a little nail lamp I have, although I may invest in a flashlight later. I mixed quite a few things into my resin with mixed results. Glitter works nicely, however adding alcohol ink is finicky. Too much, and curing is slower due to the translucent coloring the piece now has opposed to perfectly transparent. Some places inside the piece wouldn't cure due to the amount of alcohol ink used. Although I am sure UV colorants would play much nicer. Be sure to use clear molds! One problem I did have was the stickiness of the piece after curing. I tried sticking just the piece under my lamp and wiping with rubbing alcohol to remove it, without luck. Finally I just settled on spraying in with a sealer which got mixed results. My peices were fully hardened, just tacky, so curing time wasn't the problem. I don't know if that was brand specific or because of me. This phenomenon happened with and without alcohol ink being used. Overall, this is a good resin for beginners I believe. It isn't a waste of money for those of us getting our feet wet with UV resin.

I use this for crystal embedded jewelry. The results are excellent with minimal tackiness. I dry it under a UV nail-polish dryer and it sets up in just a few minutes, 3-4 minutes, after which I turn over the mold and dry it for a couple more minutes. The wands in the 2nd 2 photos are just thicker resin with mica coloring, and I cure them for 10-13 minutes, flipping them a few times. The results are a high Shine product of substantial hardness. I clean them with ammonia free window cleaners. I will buy this again. I can recommend this Resin without any hesitation.

I was a little reluctant to order this UV Resin. I use it to finish my polymer clay earrings. I have had some bad luck with UV resins with tackiness and ease of use. I received my package today and I was not home so it sat in the sun for awhile but didn't seem to affect the quality. Couldn't wait to try it because I had many pieces of polymer clay ready for the resin. It is not too thick or too thin, just right. Spread nice and even and cured into a nice hard shell that was SUPER glossy! No tackiness this time! I'm pretty impressed with this right now. The only negative I would say is the smell. It has more smell than others that I have used but not a huge issue for me. I'm just liking the results. A little hint, natural UV light from the sun cures UV resin much better than using the artificial UV lamps/lights. I have started curing for 2 minutes under the artifical, then putting out in the sun for about 15 minutes and get amazing results! I recently tried another brand that had no odor, but it did not give me the results I can get from this product. I will stick with this resin.

Deze viel zwaar tegen bleef plakkerig en werkte niet zoals het moest bleef

ok

Sert tip yazılmış fakat yumuşak bir reçine kuruması çok zaman alır. Bir şekilde değerlendirilebilir fakat reçineden saç iğneleri için kötü yani yumuşak tip yazsalardı berraklığı güzel olduğu için beğenebilirdim. Ve renkleri de güzel almıyor renkli olanların kuruması imkansız. Yapış yapış sevmedim ama iade olmayacağını düşündüğüm için dip reçine olarak kullanmayı deneyeceğim çünkü çiçeklerimin yumuşak olması güzel olabilir.

In a short period of time I have purchased 1.5L of this resin. It works for everything that I need it for and it is as strong or stronger than 2 part epoxy resin, without the cure time or the Volatile Organic Compounds that 2 part epoxy resin releases. Dries crystal clear, does not yellow with age. Lasts a long time and does not go bad after a year like 2 part resin. Cures with UV light very rapidly.

Buena resina uv. Seca muy bien y con gran dureza. Tiene mucho brillo una vez seca.