CONCORD 6" Diameter High Pressure Banjo Jr Burner Head with Brass Orifice and Build in Stand (Burner Head with Regulator Hose)

I bought this to retrofit my current burner. The size is amazing. Easy installation although I added my own bolt. The heat output is great and great price.

Using this with the Barebones all in one and it works great. Very large heating surface with easy control of the flame. Highly recommend for a burner. Will also use this with my 18" cast iron.

Used it this past thanksgiving for a homemade turkey fryer. I welded up a stand, put this under it on bricks and set a large stock pot on it with 4 gals of oil and of course a candy thermometer. Worked great for my first try at turkey frying (breast only in my smallish pot). After the turkey I fried sweet tater fries, breaded green tomatoes, green beans and apple hand-pies for desert. 100% fried thanksgiving! This thing has the capacity to put out alot of BTU's so it was a breeze to control the heat plus it was easy to crank it up to get it back up to temperature fast after putting in the cold turkey. The ring itself is a heavy-duty cast part and it has threaded feet in the bottom if you want to mount it more permanently.

The hose is not good quality. I had to replace mine after the valve stopped working. Only used it 5-6 times.

The Banjo Jr gas burner is a perfect LP burner to convert my Oklahoma Joe. The fuel hose and regulator slipped right through the wood box vent without modifying the smoker itself. I drilled one small 1/4" hole in the bottom of the wood box to fit a screw through to secure the burner. The burner can easily be removed and the wood box used as normal. I used a cast iron pan on the grate above the burner to hold my smoking wood chunks. The burner held the smoker at 250° for 10 hours. No charcoal, no mess, no water hose, no babysitting the smoker and way less smoking wood chunks.

Buena calidad

So you've been chasing that flame in your offset smoker, and have determined that babysitting your smoker in the rain is not your thing, try this cast iron burner. I say cast iron, because cast iron is indestructible. Put in in the smoke box, put a cast iron pad with wood in it over the burner (about half an inch, not directly on top), light it and go. I've been smoking with rain dumping all over my smoker and it just keeps right on cooking, with nice blue smoke coming out the chimney. The built in regulator is very sensitive, so just turning it a hair will bump your smoker a few degrees easily and quickly. So babysitting is reduced significantly and you use less wood. It just works.

Decided to try this to replace the rusted out burner in my Smokey Mountain smoker. I improvised a bracket to hold the burner and got the smoker working again. This burner holds a constant temperature much better than the smoker did when new. No problem holding 225 F. Adjusts down to a very small flame and up to way too high for a smoker. The original burner was bad about blowing out with light wind gusts. Wind will still blow out this one since I'm using a fairly low flame, but it happens much less often. It's a big improvement over the original.

Muy bueno, únicamente hay comprar un adaptador para cilindros ya que el quemador tiene conector para cilindros americanos.

Exelente producto conforme a descripción, Se desempeña.perfectamente bien

La flama es fuerte y con buen poder de calor. La manguera tiene la perilla para regular La cantidad de flama. Eso me gusto mucho. Ya lo utilicé y funcionó muy bien.

Artículo de buena calidad

Se ve de buena calidad, el material muy bueno y bonito