TAC Side Steps Running Boards Fit 2017-2025 Honda Ridgeline Truck Pick Up 3" Black Side Bars Step Rails Nerf Bars Off Road Accessories (2 pcs Running Boards)

Arrived in color-coded, well marked packaging. The support braces ,(three for each side), matched up perfectly with the pre-threaded holes on the underside of the truck. The weight and design indicates a sturdy product. The mounting bolts were a perfect fit, one socket fit them all and the bolts were in color-coded, clearly marked packaging to indicate mounting bracket to truck vs. running board to bracket. After checking under the truck to locate and test the bolts in the pre-threaded holes, I laid everything out on one side, mounted all parts loosely and then tightened all hardware into its permanent state. All went smoothly with no problems. The second side went even better than the first as I had the manipulative skills down at that point. The whole project from unboxing to putting my tools away was well under an hour.The running boards (larger of the two options) have accomplished exactly what I had hoped and look good. The non-skid surface functions well, and I'm able now to get in and out of the drivers seat without dragging myself across the turned-up portion of the foam padding to the side of the seat. This helps prevent the flattening of the foam rubber padding over time and keeps the seat looking new.I recommend this product for anyone shopping for basic, not too flashy trim.

Looks great on my 2022 Honda Ridgeline. Very easy to install with basic tools. Feels solid and so much cheaper than Honda accessories.

This is NOT a compensated review, but I know it sounds like it. Vehicle: 2020 Ridgeline AWD. Appearance: top quality. Install and fit: perfect and easy. The brackets fit exactly in the OEM locations with no adjustments or tweaking necessary. Installation tips: if you have a shop do this for you, if you pay more than a one-hour labor rate you are being ripped off; for a shop with a lift and power tools this is a half-hour job at most. A 67 year-old man crawling around his garage floor took just an hour. If you do it yourself, all you'll need is a ratchet and a 13mm socket. Don't attempt it with a wrench- you're an adult with a truck- you should have ratchet & socket set. If you're having trouble with bracket fit, make sure you have the right one- 6 unique brackets and the location is stamped on each one- look closely. Follow instructions not to tighten until all bolts are installed first. Buy with confidence- this is the second set of bars I have purchased from TAC; the first was for a 2016 Pilot and they still look good and have performed flawlessly.

These things look great! They seem very sturdy and were super easy to install. The price on these is a steal compared to the OEM ones, and they may look better. The one concern I had before ordering was the rear step looks too far forward in a lot of the pictures, but they actually look really good! They could be like an inch further back, but they don't look nearly as bad as they do in some pictures online.

Easy install in the existing holes, no modification needed to fit. Took less than an hour to install. They look great. Can’t speak for longevity yet, but at 1/3 the price of Honda’s own running boards, I can afford rd to replace them if they don’t last.

The enclosed brackets used existing manufacturer holes for mounting. Three brackets for each side and two bolts each. Took a little over an hour to install.They seem very sturdy (I weigh 255 pounds) and I like the looks.

Installation was not too bad. The only difficulty I had was that two threads on my truck were not totally clean (perhaps slightly corroded). This made it a bit difficult to know whether I had cross threaded the bolt. This is not a problem of the product but rather something to know when installing the product.The reason I gave it 4 stars is that the running board flexes when you stand on the back end. The front portion is fine but the back end noticeably flexes. Other than that, I’m very satisfied with the product

everything lined up for install except the rear passenger side end bolts to the running board > It was about a 1/2 hole off . But with a little adjustment of the brace it worked. Sturdy and work well