Premium Grade Cyanoacrylate (CA) Super Glue by Starbond - 16 oz. Complete Refill KIT (453g) - Super Fast Thin Adhesive, Precise Application for Woodturning, CA Finish, Woodworking, Hobby Models, Inlay

I've not before used a product as sticky as this one is! It'll leave a lot of sticky spots on your work table unless you line it with newspaper before opening up the bottle. It is more runny than water, if that is possible. One of my first uses for it was to put a drop of it on the knots securing the lines (fine cotten string) between model rocket bodies and their parachutes. Despite being above average careful and using the microtip dispensers, a plus that no one else supplies with their similar products, I found that it had wicked nearly 3/8" up each line before I had a chance to discover and fix the problem! This is an amazing - if a bit pricey product. It'll glue pieces of anything to anything and It comes with a large serving of micro-tips, a spare bottle dispenser cover, and a most generous bottle of goo that'll last a long, long time. Unless you spill it, in which case you'd better be careful. If you step in the resulting glue-puddle, you'll never get your shoe off the floor! Two thumbs up! As a follow up to my first post, many reviewers have cited problems using this runny CA adhesive on balsa wood & paper, a problem most liquid CA glues share. The trick to obtaining a great bond in these circumstances is to first apply a thin coating to the two edges to be bonded. Quickly WIPE THE EXCESS GLUE OFF THESE EDGES. Then let the glue sit for a while to harden. Finally, apply another VERY THIN coat of glue to the edges again, line everything up and press together. You'll get a darn near instant bond of INCREDIBLE strength. This product is VERY NOT suited for gluing things without flat edges/surfaces together, like the bathrobe hook problem another reviewer mentioned here. For this, you need a thick, non-runny adhesive. JB-WELD is a most impressive adhesive for applications like this. Apply a little to the coat hook screws and in the screw holes, cover the back of the hook with a thick coating of the stuff, then mount the hook to the door with the screws. The hook will never, ever come off the door again, promise! Even if the screw holes were stripped!

I thought that I knew blue until I bought this bottle. This glue is very strong. It bonds to surfaces in seconds it dries no need to put it under fan because it self drives in minutes if not seconds it is a great little tool to have if you're in RC or arts and crafts or anything that you're building that needs to be bonded together. Leaves a great finish no signs of glue dries clear. I know a lot of other glues out here that do not dry as fast and good and are way more expensive this one is a great value for your money so I vote Yes. One thing though be careful on giving this to kids because this glue gets so hot I felt it burning and I had gloves on. But that's because I was being careless and wasted it yeah so I vote Yes

Fast as in dries fast. If you get it on your hands you'll know what that means. Thin, as in it's runny, almost like water if water made everything stick together, so handle with care. This comes with some micro tips which I use all the time. (this isn't my first super fast thin glue rodeo) And the anti clog cap works, so it's a pretty good value. Now - a safety tip... Don't get it on you and something else. It's warm to the touch, and that's something you don't want to find out by touching it and getting it on your hands but say, if you did, it will feel warm. Clean off immediately, in soap and water, or vegetable oil. Acetone or that Goo Gone stuff will work too. It's not as rigorous as the old school, regular "super glue", but it's not be messed with.

The glue is good and this is a good bottle to use while you use another bottle to keep refilling it. I will say though that I did not get any of the small tips because the stupid package leaked them all out prior to arriving. I had to roll with it cause I can't wait forever. It does dry fast. And it can burn your eyes by just the smell. It also will set anything cloth on fire or at least cause it to smoke super fast. The smoke from it will give you a headache like nothing you ever felt. Use in ventilated area. I did but still got it in my eyes anyway. The smoke that is. If you actually get this in your eyes you will be blind forever. Perfectly clear. Very strong holding power. Use gloves and eye protection. Nitrile gloves worked for me but with cotton balls it will melt the gloves and still burn you. Needless to say... be careful

This glue is great for minatures BUT you should follow instructions, unlike me , it says to use gloves . I didn't and stuck my fingers together the first few times . The micro nozzles are great and as long as you take them off and use the pin in bottle are reusable . Very thin and takes a steady hand to use but it does bond quickly and any extra residue can be carefully sanded off ( I used a disposable nail file with good results). For the amount you get yes I would recommend this but if you are not a master use gloves or you will be debonding your fingers

Fantastic Glue and helped make a lot of things on our Santa sleigh more secure. The present tower withstood winds and everything in the Santa sack was held together. As well as the sleigh itself this glue was multipurpose and did not disappoint. Reasonable priced and would definitely buy it again.

Good product, well packaged and fast delivery

Brilliant glue. At last, a super glue that, after you have used it once, you can use again without the nozzle seizing up and the bottle having to be thrown away! This glue is thin, and so it squeezes out better than the thicker kind, it also comes with spare nozzles in case the nozzle does go solid, but to be honest, I simply use a bit of 3-core wire, dip it into the bottle and drip it onto the surface I want to glue, you usually only need a few drops of this glue for it to work. If you use a mitre-bond spray on the other surface, it sticks straight away without any waiting time. Keep it in the fridge and I've found that it is still working months after I last used it. Best invention for glues in years.

Be careful with this stuff. It squirts out when the bottle is tipped slightly. I glued my fingers together. The applicator needs improvement. It bonds great when you can control the squirting glue and put it in the right place!