Starbond EM-02 Super Fast Thin, PREMIUM CA - Super Glue plus Extra Cap and Microtips, 2 oz.

This glue is great for minatures BUT you should follow instructions, unlike me , it says to use gloves . I didn't and stuck my fingers together the first few times . The micro nozzles are great and as long as you take them off and use the pin in bottle are reusable . Very thin and takes a steady hand to use but it does bond quickly and any extra residue can be carefully sanded off ( I used a disposable nail file with good results). For the amount you get yes I would recommend this but if you are not a master use gloves or you will be debonding your fingers

★★★★★ Outstanding CA Glue for Precision Work I’ve tried quite a few super glues over the years, and Starbond Super Fast Thin CA Glue is easily one of the best. The ultra-thin consistency allows it to flow into the smallest gaps and joints by capillary action, making it ideal for precision work. I mainly use it for model making and book nook builds, where accuracy is everything. It bonds incredibly quickly, creating a strong, reliable joint without leaving a messy finish. As long as you apply it carefully, you need very little to get excellent results. The included precision applicator tips are a real bonus, allowing you to place tiny amounts exactly where they’re needed. It makes delicate assembly far easier and helps avoid the glue ending up where you don’t want it. If you need a fast-setting, high-quality thin CA glue for modelling, woodworking, crafts, or other detailed projects, this is an excellent product. It’s become a permanent fixture on my workbench and one I’d happily buy again.

Be careful with this stuff. It squirts out when the bottle is tipped slightly. I glued my fingers together. The applicator needs improvement. It bonds great when you can control the squirting glue and put it in the right place!

I've not before used a product as sticky as this one is! It'll leave a lot of sticky spots on your work table unless you line it with newspaper before opening up the bottle. It is more runny than water, if that is possible. One of my first uses for it was to put a drop of it on the knots securing the lines (fine cotten string) between model rocket bodies and their parachutes. Despite being above average careful and using the microtip dispensers, a plus that no one else supplies with their similar products, I found that it had wicked nearly 3/8" up each line before I had a chance to discover and fix the problem! This is an amazing - if a bit pricey product. It'll glue pieces of anything to anything and It comes with a large serving of micro-tips, a spare bottle dispenser cover, and a most generous bottle of goo that'll last a long, long time. Unless you spill it, in which case you'd better be careful. If you step in the resulting glue-puddle, you'll never get your shoe off the floor! Two thumbs up! As a follow up to my first post, many reviewers have cited problems using this runny CA adhesive on balsa wood & paper, a problem most liquid CA glues share. The trick to obtaining a great bond in these circumstances is to first apply a thin coating to the two edges to be bonded. Quickly WIPE THE EXCESS GLUE OFF THESE EDGES. Then let the glue sit for a while to harden. Finally, apply another VERY THIN coat of glue to the edges again, line everything up and press together. You'll get a darn near instant bond of INCREDIBLE strength. This product is VERY NOT suited for gluing things without flat edges/surfaces together, like the bathrobe hook problem another reviewer mentioned here. For this, you need a thick, non-runny adhesive. JB-WELD is a most impressive adhesive for applications like this. Apply a little to the coat hook screws and in the screw holes, cover the back of the hook with a thick coating of the stuff, then mount the hook to the door with the screws. The hook will never, ever come off the door again, promise! Even if the screw holes were stripped!

This glue is excellent for glueing fossil fragments together. This is the only glue I use when glueing fossil fragments together as it is fast acting and penetrates the rock leaving no residue on the surfaces.