---
product_id: 98533617
title: "eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight"
brand: "esun"
price: "1290 kr"
currency: DKK
in_stock: true
reviews_count: 13
url: https://www.desertcart.dk/products/98533617-esun-ebox-3d-printing-filament-box-second-generation-dehydrate-filament
store_origin: DK
region: Denmark
---

# eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight

**Brand:** esun
**Price:** 1290 kr
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight by esun
- **How much does it cost?** 1290 kr with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.dk](https://www.desertcart.dk/products/98533617-esun-ebox-3d-printing-filament-box-second-generation-dehydrate-filament)

## Best For

- esun enthusiasts

## Why This Product

- Trusted esun brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

This listing is for one eBOX. eBOX is designed to keep filament dry and dehumidify various kind of filaments, especially those moisture sensive filaments.eBOX can bake your filament at a designated temperature for hours. It can also weight your filament so that you know how much filament is left. It is a great companion for any 3D FDM printers.This is the second generation of eBox with many improvementsWith a maximum heating temperature of 80ºC (heating panel temperature), eBox can also be used to create a completely dry environment for your filament and to actively dry out the moisture in some filaments.Features:Filaments can be rack placed with eBox Sealed protection, dust-free Set the heater time (default is 5 hours and up to 18 hours) and temperature up to 80 Celsius (heating panel temperature, chamber temperature lower). It is recommended to bake filament while printing. Real-time detection of filament weight Comes with an anti-skid rubber feetIt is recommended to run the eBox while printing. The rotation of spool can help dehydrate the filament better.

## Features

- About this item
- Filaments can be rack placed with eBox     Sealed protection, dust-free     Set the heater time (default is 5 hours and up to 18 hours) and temperature up to 80 Celsius (heating panel temperature, chamber temperature lower). It is recommended to bake filament while printing.     Real-time detection of filament weight     Comes with an anti-skid rubber feet. This listing is for ONE eBOX

## Images

![eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight - Image 1](https://m.media-amazon.com/images/I/611AGQ5pefS.jpg)
![eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight - Image 2](https://m.media-amazon.com/images/I/81zHZC-+VtL.jpg)
![eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight - Image 3](https://m.media-amazon.com/images/I/711Ar7XrVOL.jpg)
![eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight - Image 4](https://m.media-amazon.com/images/I/713DVR9jTqS.jpg)
![eSUN eBOX 3D Printing Filament Box Second Generation, dehydrate Filament, Keep Filament Dry and Measure Filament Weight - Image 5](https://m.media-amazon.com/images/I/71aw9+fZyfS.jpg)

## Customer Reviews

### ⭐⭐⭐⭐ 







  
  
    Does it's job well
  

*by G***D on Reviewed in the United States on February 12, 2019*

When I was shopping for a filament dryer I saw this had only one review and it was negative. The guy said he set the temperature for a certain amount, and then checked the filament inside, and it was not the temperature that the screen showed and so he returned it.I don't usually pay attention to only one negative comment and so I decided to give it a try, because it's cheaper then the only other one which is just a repurposed food dryer and does not have the ability to weigh the spool like this one does.Reading the manual, I saw that they said at least twice that the temp listed on the screen was the temp of the heating plate, and not the filament or any other part of the device. I guess the other guy didn't bother to read the manual.I don't really care if the temperature is accurate, I care if it dries my filament. I had some PLA that was too waterlogged to print a first layer. I put it in and set it to the manual recommended 50 degrees and 5 hours. Afterwards I tested it and there was a vast improvement in print quality. That's what I needed to be happy.The device has a small nook to place a desiccant package in, and a tiny fan moves the air through that nook and around the inside of the device. There is a heating plate under the bottom that warms the air. The spool sits on two rollers and there is a little plastic thing with a tube that allows you to feed it outside the device and use the spool while it is still inside.After experimentation, I found that really waterlogged PLA dries better at 70 degrees and 7 hours, before it returns to a like new print quality. The 50 degree setting at 5 hours, is about as effective as my oven at the lowest setting for 5 hours. This device of course uses much less power then a oven, tracks weight and can feed to your printer.It's not perfect, but I like it and will use it to dry my spools and keep them dry while printing.

### ⭐⭐⭐⭐ 







  
  
    Replace the fan!
  

*by I***E on Reviewed in the United States on January 5, 2020*

+ drys out filament well+ easy to use+ looks nicer than the modified fruit dehydrator ones- stock fan is pretty loud.other:The rollers can fit up to 72mm wide spools. Up to about 80mm wide (or even wider if the spool isnt very tall) will fit in the box for drying, but wont spin for printing directly from the box.It's worth replacing the 40x10mm fan with a noctua. The ebox has 4 screws on the bottom underneath the rubber feet. I used this one https://www.amazon.com/Noctua-Cooling-Blades-Bearing-NF-A4x10/dp/B009NQLT0M/ref=sr_1_3?keywords=40mm+fan&qid=1578261234&s=electronics&sr=1-3

### ⭐⭐⭐ 







  
  
    Ok not bad not great
  

*by T***L on Reviewed in the United States on January 1, 2020*

So unlike other reviews I gathered actual data using a wireless temp, humidity and pressure logger that records data points hourly over wifi.  Setting a spool in at max temp for 9 hours yielded in box temps between 100 and 103f after the first hour, and with a used dissilacate pack it brings the in box humidity down to 10-15% within 2 hours and holds it there until the timer runs out.  My room humidity is between 30 and 36% and temp is about 69-72f measured with a similar device.  I found that trying to feed my tronxy x5s which is a Bowden tube on top unit created jams and under extrusion so I'm not super confident in the tube feeder they provide.  I think hotter in box temps and a fresher dissilacate pack would help get it even dryer inside.  My petg did print better but for the 80 bucks this thing cost I ha e to wonder if I'd be better off with a toaster oven with digital controls.  It's under powered overall imo for what it is supposed to do and the price.  I'd rather have 50+ watts and not bother with the weighing functionality.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.dk/products/98533617-esun-ebox-3d-printing-filament-box-second-generation-dehydrate-filament](https://www.desertcart.dk/products/98533617-esun-ebox-3d-printing-filament-box-second-generation-dehydrate-filament)

---

*Product available on Desertcart Denmark*
*Store origin: DK*
*Last updated: 2026-03-08*