Car LED Strip Lights, 2 Pcs 24 Inch Flexible Headlight Strips DRL Light Tube, Dual Color White and Amber Daytime Running Lights Waterproof Neon Turn Signal Bulb Sequential Switchback

Had them for a bit now and so far so good. I stallation was easy enough after 5 min worth of searching on YouTube and finding a wiring diagram for my car which is super easy if you have a mustang because everyone HAS a mustang lol. I'm sure they look dope or whatever but genuinly bought these for the light gain not the looks as they are a pretty easy way to add some brightness and wasn't dissapointed they are pretty bright. Have since switched to led's in the headlights etc. but before the switchbacks were far brighter than the stock bulbs. Had them for a couple weeks now and they've held up fine. Make sure you clean the area then, clean the area and as a final step clean the area I used ipa 91% and had no issues with it adhereing at all. Prep work is always the most important step with things like this and you'll be fine. Also Instructions have you hooking them up like a stereo when you were in high school, running wires to the battery and stuff. Don't do that. You have three wires to hook up, a ground and a hot for the turn signals and a hot for the parking lamps. Just splice into those wires on your existing harness make sure they have a good connection and do yourself a favor and heat shrink the connections to keep them dry and boom you're done.

I'm not usually the type to make a review but for this product I have to. So buckle up it time for a story. So I got into an accident a little while ago and because of that accident my turn signal was destroyed. Bulb and the socket completely unusable. Now when I tried to find a replacement socket I couldnt find it anywhere due to my car being an 05 and a scion (which is a dead company). I tried my luck with advance auto and they said they had the part so i ordered it and waited a week just to find out it was the wrong dang part. Frustrated that I couldnt find a part, I remember back to when I was scrolling through Instagram and saw an ad for a product similar to this and thought to myself "welp I got nothing to lose" and went on Amazon and ordered this product. I ordered it late at night and it still came in the next morning which made me a very happy camper anyway I put it on the headlight missing a turn signal and turn on the car and was blown away. I was amazed at how well this product looked. The daytime running light looks great and the left turn signal also looks great despite moving faster than normal due to no actual bulb being hooked up. Also to my surprise the next day it started to heavily rain and the strip tanked the rain without moving an inch. 5/5 highly satisfied and would most definitely recommend.

I've only had these things installed a week, but they are working quite well in many lighting conditions. Quite honestly, I almost think they may be a little too bright! But nice to know i'll be seen from miles away! Install and wiring notes: I decided to use and installed a 'fuse tap - 10 amps max' (see pic 2) on to my existing ACC fuse. I then connected the fuse tap red wire to to 18 gauge red primary wire that was run through the firewall into the engine area, ran along one side of the engine area, long enough to reach both headlights. I used velcro to keep the wires neat and out of the way. Both LED light wires (red) were spliced/soldered to this red primary wire. Note that each light is around 1amp, so a very fractional amount of amperage needed. The LED light wires (black) were spliced/soldered to 18 gauge black-colored primary wire and ran to the negative battery cable frame bolt and connected to the bolt with circular terminals. The LED light wires (yellow) were spliced/soldered to the turn signal light positive cable, to allow for the synchronized turn flashes. I positioned the lights flat, along the inner lip of each headlight. This allowed for the side of the light to stay exposed, and visible in-between the headlight and grille/hood. This method was a choice for me, as I originally tried having the lights facing forward in the front of the headlight, but didn't like the way the exposed LED looked while the truck was not running. I felt it looked better with the thin side facing forward. It's still very bright! Total time: around 2 hours Pros: Extremely bright, day or night! Very nice look! Cheap! The amber turn signal lights are a bonus feature! Cons: Will require significant wiring to get it to work.

The strips look very nice in person. There are two things I would note, though. First, When the turn signal is deactivated, there is a slight delay before switching back to the white LED. I am unsure if this is by design or if this is an error, but regardless it isn't a deal breaker. Second, the strip seems to note have an adequate diffuser to hide the LEDs within the strip. If you look closely in person, you can very easily see the individual white and orange LEDs running along the strip. Ideally, there would be a proper diffuser to hide them (like in my Halos). However, the strips don't. Regardless, they still work as intended and I am satisfied with how everything came out for my 2006 Acura TL.

I bought this to add turn signals to my side by side. They have Daytime running lights as well, it looks good and adds a lot to my machine, but... 1st problem I noticed was one of the strips was not marked where it could be cut, I knew I was going to cut both of these to fit around the light housing. I tried to find where I could talk to the seller, but it was all Amazon, I didnt have the time to send it back so I took a gamble, measured the other one where I cut it and tried my best to be precise (not the easiest when you are cutting an outer shell, then the led tape inside) the gamble paid off this time, I hope its not just enough off that its a ticking time bomb and will stop working when it gets jiggled. The second issue was with the adhesive. No matter how hard I tried to pull the outer strip off to reveal the adhesive, it would pull itself off of the strip, I pulled the first one off, and some adhesive stayed, than half way down it pulled all of it off of the strip. Luckily I have some 3M tape that fit, on the second one, i just pulled the blue tape off, and pretty much all the adhesive came with it. I was actually worried about the adhesive, 3M is by far the best at this stuff, probably money ahed with it anyway, but still, it is a pain. I know led's dont take much energy, but the wires on these are so small, my stripper doesnt even work, i got them stripped, but looks like about 5 strands in there. Hopefully I have installed is suficiently where it wont move much and break to wires, would have easily paid a little more for some heavier wire.

I don't normally write reviews unless I am very impressed with something are very unsatisfied. I am very impressed with these lights. I install them on my Ford F-150 pickup just for the DRL lights. They are very bright and seem to be good quality. Yes you have to use something other than the glue if you bend them around. I use some gorilla duct tape behind it and it held very good. I am just using the DRL bright lights and not the turn signals, but they were easy to install and seem to be great quality. We will wait to see how they last.

They are a nice addition, " in thought "! #1- The brightness is excellent, and above expectations, out of the box. Once Installed for longer than a few days, not so much! #2- The adhesive on the strips was surprisingly strong, ( the one thing I thought would surely fail ), and far outlasts the life of the light strips! #3- Connecting the lights was straightforward, as long as you are Comfortable using a soldering iron. OVERALL OPINION AFTER PURCHASING, INSTALLING, AND USING........... SAVE YOUR MONEY FOR SOMETHING BETTER! AFTER WASTING MY TIME INSTALLING, ROUTING, TIEING, AND SOLDERING, I ONLY HAD A COUPLE DAYS OF OPTIMUM BRIGHTNESS BEFORE THEY JUST DIMMED, AND LOOKED YEARS OLD, AND ONLY A WEEK BEFORE PART OF THE FIRST STRIP FAILED, THEN THE SECOND STRIP LESS THAN A WEEK LATER!

So far, my initial thoughts are these are great. I had just recently installed new headlights and a grill on my 08 F150 Fx2. All of which required me to tap into the turn signal and running light wiring so I already knew which wires to tap into for these. I installed them in the bottom portion of the new grill. Pretty easy to cut down. I had to modify the end of the wire where it connects to the LED strip to get it to fit where I did. Because the tape that applies this to the surface its being applied on only runs along the very middle of the strips I ended up running a thick bead of silicone on the bottom and sides. Hopefully that will keep these in place while I'm driving. Only time will tell. If that doesn't work that isn't really any fault of how these are manufactured. The only issue I have is because I had to cut these down to about 10 inches that the sequential aspect of the lights runs very short now. At the full 24 inches though it was even more cool looking. I just bought a second set to run around the headlights. After that I don't really think I can stick lights on the front of the truck. *Update* the second set came and I installed them on my headlights. I've updated the video I submitted. I changed the brightness and saturation of the video so the lighting sticks out a bit more in the video and to slightly reduce the lens flare. Again, super easy to install. Just tapped into the same running light and turn signal light location on the back of the headlight as I did for the sequential lights I installed in the grill. If I have any issues in a few months time I will update the review. Otherwise assume they are still performing as well as they should.

Love the look of these lights! The led strips are nice and vibrant and easy to install. Had these on my vehicle since 2020 (3 years ago) and they are still working. Only con would be that the adhesive is not so good...so I had to use 3M double sided tape to have them stick better to my headlights. Seller had good customer service and communication. Would definitely recommend! Pros: -Bright lights -Easy install -3 years+ and still running good -Reasonable price Cons: -Adhesive on the strips aren't good -The buldging end caps on each end of the strip (if they could use a thinner rubber or make it all in one piece, the led strips would look more sleek and not have thick rubber end caps exposed. (Ideas for future designs?) Also on that note, somehow have the amber lights flash as you lock or unlock your car would be nice.

Very nice quality item and well packaged. Not fitted mine yet waiting for the engineer, but the length is just right to cover a large headlight unit in an L shape. One thing I will do however is add another strip of 3M two sided sticky tape. I buy it from Amazon too. The strip lights can take a fierce head on weather like snow and ice, so I'm going to double up on adhesion just to be on the safe side.

Facile installazione

werkt perfect met IC decoder.mijn vorige waren zonder en die werkten niet zo als verwacht. Gemakkelijk te monteren en af te knippen volgens lengte.

Eclaire très bien mais demande un minimum de connaissance en électricité car j'ai dû créé un faisseau pour les feux de jour et pour le clignotant il faut le brancher sur la cosses du phare à l'emplacement du fil du clignotant pour le raccordé