Workbench Caster Kit Set of 4 with Quick Release Plate & 400 lbs Loads, 3 Inch Retractable Stepdown Caster Wheels for Workbenches, Tables, Stands and Equipments (17002)

Installed these casters as soon as they were delivered. Working on my first real workbench which I believe will last me for the rest of my life. Because my garage is a small shop mobility is crucial. My best guess is my bench weighs about 200lbs. Casters are heavy and sturdy and the wheels glide very well. I installed the quick release plates and the wood screws provided have a rounded head which gets in the way of the back plate of the casters. Picked up wood #14 screws 2” from the big box store to solve the problem. My legs are almost 4” thick. Thus far I have no complaints and highly recommend these casters for heavy items. Pros Easy installation Quality casters Heavy and sturdy Wheels glide with ease Cons - needed to pick the proper screws for my setup

Awesome product! Very easy to install. I just used a scrap piece of 2x4 to make a template for the holes that needed to be drilled and this whole project took me about 30 minutes. My workbench practically glides across the floor now. I will definitely be buying more for my other shop furniture.

These are amazing for allowing me to move a heavy, compact table saw around my workshop/garage. My gripes are: 1. The template provided is great, but more guidance on the size of pilot hole provided would be appreciated. I used calipers and went undersized drilling through a 2x4 and stripped out 2 of the provided screws (eventually used a 3/16” but and on one of the legs used a 1/4-20 bolt). 2. There is hardly any clearance between the upper mounting hole and the foot lever, so it made tightening the included screw a challenge. 3. Make sure that you either have a 13/16” cone/pedal wrench or a big set of channel locks to tighten the caster in place. Again, so far they are super useful, but more guidance on the installation would be nice

I ordered this product to add mobility to a reasonably heavy wooden workbench that I purchased at Harbor Freight. The bench can hold 450 lbs. + it's weight of 115 lb. These Powertec casters were rated for more than that weight and are very solidly built. They are a little more expensive than competing similar makes, but I figured the $ difference was not that great, so I went for what appeared to be best quality. I installed the Quick Release Plates prior to assembling the workbench for ease of installation. The instructions and template provided worked impeccably, and, when the workbench was complete, I attached the wheels and everything fit fine. Note 1: The wooden legs of the workbench were wider than the included bolts, so I bought 8 bolts (1/4") of the proper length (2.5") and they worked well. Note 2: You can use the same casters on multiple benches if you purchase additional Quick Release Plates separately. Overall, an online purchase that worked out very well with a little prior research.

I love these things. I have 3 tables I move around due to the size of my shop I have to move them to use them. I have one set of wheels and move the tables very easily. They lift the tables and set them back down right where I need them. They are sturdy and roll very well and easy to take off one table and put on another table.

High quality and worked as advertised. Easily supported a 250+ elliptical For movement. Detachment scheme worked well for easy removal.

I purchased this item along with the quick release mounting brackets. I installed the quick release mounting brackets on two workbenches with the goal of moving the wheels to the workbench I would be using at that time. Two issues: 1. When rolling the cart around my workshop the wheels will periodically hit the mounting brackets and stop rolling.....then I have to change directions to get it rolling again. 2. There is a little drop at the end of the garage, so when I go to roll the workbench outside to make my cuts, the front wheels that drop off first fall UNDER the workbench. This stops the bench from rolling. I then have to lift the workbench and reposition the wheels to get the workbench rolling again. Both of these issues are very frustrating, I have been making changes to the workbench in hopes that I can resolve some of these issues. Nothing has worked so far. I purchased the items on January 14, 2023 and am now 2 days past my return window. Don't waste your money on this item unless you will only be working on a flat surface (forever) and don't mind dealing with frustrating issues.

Admittedly I am writing this in a very pissed off mood but it is because of these stupid wheels so I feel justified. Construction is fine, install was a breeze but unless you are using these wheels on a perfectly flush/level/even/unbroken surface they will constantly fail you every inch of the way. Their design only works if there isn't a single crack or crevice or bump or stone across the surface you plan to roll because if ANY 1 leg of the cabinet you are rolling hits any of these things, one of the other legs will "rise up" allowing that wheel to fold under the cabinet you are moving, making the entire process both infuriating and far far worse than just carrying the thing out by hand. If you have an uneven surface I cannot recommend these wheels unless you are ready to modify them, by preventing them from "falling" under the very leg it is trying to support. I am trying to tie them up so they don't fall under the cabinet but that isn't working. I think I'm going to have to weld a metal stop on them somehow.