---
product_id: 8696022
title: "Bernzomatic® Aluminum Brazing and Welding Rods - Two 12 Inch Rods for Repairing Aluminum Windows, Doors, Gutters, Siding, and More; Working temp of 720° to 750° F"
brand: "bernzomatic"
price: "134 kr"
currency: DKK
in_stock: true
reviews_count: 13
category: "Bernzomatic"
url: https://www.desertcart.dk/products/8696022-bernzomatic-aluminum-brazing-and-welding-rods-two-12-inch-rods
store_origin: DK
region: Denmark
---

# 720-750°F working temp 12-inch precision rods Made in USA quality Bernzomatic® Aluminum Brazing and Welding Rods - Two 12 Inch Rods for Repairing Aluminum Windows, Doors, Gutters, Siding, and More; Working temp of 720° to 750° F

**Brand:** bernzomatic
**Price:** 134 kr
**Availability:** ✅ In Stock

## Summary

> 🔥 Weld like a pro, fix like a boss!

## Quick Answers

- **What is this?** Bernzomatic® Aluminum Brazing and Welding Rods - Two 12 Inch Rods for Repairing Aluminum Windows, Doors, Gutters, Siding, and More; Working temp of 720° to 750° F by bernzomatic
- **How much does it cost?** 134 kr with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.dk](https://www.desertcart.dk/products/8696022-bernzomatic-aluminum-brazing-and-welding-rods-two-12-inch-rods)

## Best For

- bernzomatic enthusiasts

## Why This Product

- Trusted bernzomatic brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Made in the USA:** Crafted domestically to ensure premium quality and consistency.
- • **Precision Length:** 12-inch rods designed for controlled, professional welds every time.
- • **High-Heat Performance:** Operates flawlessly at 720-750°F for reliable aluminum brazing.
- • **Versatile Repair Solution:** Perfect for small to medium aluminum fixes—save time and avoid costly shops.
- • **User-Friendly for DIY Pros:** Ideal for millennial managers mastering aluminum repairs with ease.

## Overview

Bernzomatic AL3 Aluminum Brazing/Welding Rods deliver expert-level aluminum joining with a high working temperature range of 720-750°F. These 12-inch rods offer precision and control, made in the USA for guaranteed quality. Perfect for professionals and DIY enthusiasts aiming to repair or fabricate aluminum parts efficiently and cleanly.

## Description

Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece

Review: interesting stuff - used this to braze some aluminum pieces together. worked very well however it does take practice and patience. My tig skills are not the best but I can solder so thought to give this a try. very satisfied with this product. I found that it does take a lot of heat on the metal to get it going, and like other reviews have said its necessary to heat the metal and melt the rod into it. It does help to use a tig tungsten to direct the puddle as it does not flow to rapidly which is actually good as it helps fill holes. Best procedure is to get the parts as hot as you can and use the rod very sparingly. this will give the best flow and get just enough rod around the parts to form a nice bead which then requires less clean up. then wait a while for everything to cool down. I had to remind myself several times that welding gloves are not tongs.
Review: Works well with the right torch. - Works really well for what it is. I used this to repair a puncture hole on an older aluminum bicycle frame, and I was initially having issues using a smaller torch, I couldn't get the product to melt on the frame. I picked up a bigger handheld blow torch from Harbor Freight, still using regular green tank propane and was working within minutes. The sticks are fairly easy to work with, as long as you don't let it run and don't apply heat directly to the stick. I have some welding experience from working in a steel yard, but none in brazing or aluminum welding and this product was very easy to use for a first time user. I just watched a few YouTube videos and dove right in. I was able to span a hole almost an inch in diameter by using a circular technique, and I built up the product enough to where I was able to grind and sand it smooth afterwards. I just had to be careful of overheating the existing product I had laid down as I was building it up, or else it would run or drip. The size of the torch was really paramount, as was heating the area surrounding your work. You would never have known there was a big puncture hole in my bike frame at one point, unless you stripped the paint off and saw the difference in colors of aluminum. Highly recommended for small repairs, and saved me from going to an aluminum welder or bike repair shop.

## Features

- Package Weight: 0.01 pounds
- Brinnell hardness: 100
- Working temp: 700-750 degrees
- Made in United States

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0000CBJGI |
| Batteries Included? | No |
| Batteries Required? | No |
| Best Sellers Rank | #39,099 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #19 in Brazing Rods #714 in Welding Equipment & Accessories |
| Color | No Color |
| Customer Reviews | 4.2 4.2 out of 5 stars (1,711) |
| Date First Available | January 1, 2008 |
| Included Components | Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece |
| Installation Method | arc-welding |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Item Weight | 0.704 ounces |
| Item model number | AL3 |
| Manufacturer | Bernzomatic Corp |
| Material | Aluminum |
| Number of Handles | 1 |
| Part Number | AL3 |
| Power Source | hand_powered |
| Product Dimensions | 2 x 0.2 x 14.5 inches |
| Shape | shape |
| Size | 1 |
| Usage | specific_uses_for_product |
| Warranty Description | Warranty |

## Images

![Bernzomatic® Aluminum Brazing and Welding Rods - Two 12 Inch Rods for Repairing Aluminum Windows, Doors, Gutters, Siding, and More; Working temp of 720° to 750° F - Image 1](https://m.media-amazon.com/images/I/61Z8Uxvdo+L.jpg)

## Available Options

This product comes in different **Number Of Items** options.

## Questions & Answers

**Q: Will a hand held  torch be hot enough for that**
A: I've tried everything when it comes to merging two pieces of aluminum with heat... TIG is by FAR the best.... these bernzomatic sticks are second. the cheap, crappy chinese ones where you get 50 for $15.00... don't waste your time, much less your money on them... 

The issue is the material... aluminum will go from a solid to a liquid quickly! It goes from liquid to gas even faster! So if you're working with thin aluminum and you wanna braze it. Use a $12.00 novelty butane torch with a wide flame! No pencil torches!  Unless you just don't like the customer and you wanna waste some time watching your work piece disintegrate into nothing, lol...  

I mean, there's very little molten drip if any... it'll go from solid to gas in a blink... so heat the area evenly and make sure your bond it true by using a small pointed hammer, like a baby chip hammer made of brass! If your weld sux, it'll break free under light to moderate tapping.

good luck! & GOD BLESS!

**Q: Do you need to use an aluminum flux with this product ?**
A: No i did not use flux it has some in it but you may need more flux if you work with it too long, i used it on A380 aluminum alloy and it was fine.And the shipping takes a longtime so if you can look for it at Homedepot sometimes they have it in stock.

**Q: Rmark1083, thanks (off-center hole). problem solving through posting is so frustrating when limited/restricted to having real dialogue. need change??**
A: I've seen were machinist has taken A threaded hole and cut the bolt off flush at the base and then center punch around the outer edges so that it doesn't move and then center punch the new true center and then drill and Tap it? Or even make the hole a lot bigger in order to use a larger bolt to accommodate the new hole to be drilled? Or even weld the hole shut in order to start over. It's been my experience that depending on the material you are working with that the welded approach can be very hard to drill back? High carbon steel. Hope this helps and good luck. Amazon asked if I could answer your question is mostly why I'm replying.

**Q: Are these 3/32**
A: Didnt measured, but thet are flat shape not round.

## Customer Reviews

### ⭐⭐⭐⭐⭐ interesting stuff
*by A***R on September 24, 2023*

used this to braze some aluminum pieces together. worked very well however it does take practice and patience. My tig skills are not the best but I can solder so thought to give this a try. very satisfied with this product. I found that it does take a lot of heat on the metal to get it going, and like other reviews have said its necessary to heat the metal and melt the rod into it. It does help to use a tig tungsten to direct the puddle as it does not flow to rapidly which is actually good as it helps fill holes. Best procedure is to get the parts as hot as you can and use the rod very sparingly. this will give the best flow and get just enough rod around the parts to form a nice bead which then requires less clean up. then wait a while for everything to cool down. I had to remind myself several times that welding gloves are not tongs.

### ⭐⭐⭐⭐⭐ Works well with the right torch.
*by C***W on May 30, 2018*

Works really well for what it is. I used this to repair a puncture hole on an older aluminum bicycle frame, and I was initially having issues using a smaller torch, I couldn't get the product to melt on the frame. I picked up a bigger handheld blow torch from Harbor Freight, still using regular green tank propane and was working within minutes. The sticks are fairly easy to work with, as long as you don't let it run and don't apply heat directly to the stick. I have some welding experience from working in a steel yard, but none in brazing or aluminum welding and this product was very easy to use for a first time user. I just watched a few YouTube videos and dove right in. I was able to span a hole almost an inch in diameter by using a circular technique, and I built up the product enough to where I was able to grind and sand it smooth afterwards. I just had to be careful of overheating the existing product I had laid down as I was building it up, or else it would run or drip. The size of the torch was really paramount, as was heating the area surrounding your work. You would never have known there was a big puncture hole in my bike frame at one point, unless you stripped the paint off and saw the difference in colors of aluminum. Highly recommended for small repairs, and saved me from going to an aluminum welder or bike repair shop.

### ⭐⭐⭐⭐ Need to Heat Working Area to Flow Temperature
*by M***A on November 12, 2020*

I have a 2004 Nissan Altima. The bolts that's control the rear wheel alignment run through bushings and they rusted in place over time. One of the bolts that I had to cut off was at the top of the knuckle where the bottom of the rear shock mounts. It was dark, and I was stupid, and continued. You know the rest, I cut into the knuckle a bit. After pressing the bushing out, I thought about ways to repair the damage I had done. JB Weld was on the top of the list, but I thought it'll be more effective to use a quasi welding method. I came across these Al brazing rods and thought I'd give them a try. They didn't work for me, but that doesn't mean they can't work for you. To use these rods effectively, you have to treat them like solder. The base material has to be hot enough to melt and flow the Al. I wasn't able to do that simply based on my heating materials (MAPP torch) that I had available as well as the mass I had to heat. The torch just couldn't heat the knuckle to the brazing rod's working temperature (flow) point, which is around 725F. Other than that, I could see these 100% working well. I was able to make them a flow and work very well on smaller, practice items. So, before you discount these as an option to your repair, think about what you're trying to do and if you have enough heat to get to that working temperature. They will work if you do.

## Frequently Bought Together

- Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece
- Forney 37250 Brazing Flux, 8-Ounce Tub
- Blue Demon BDTP-125-01T Triple Play Low Temp Aluminum-Zinc Brazing Rod 1/8" x 18" 1 Lb Tube,

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.dk/products/8696022-bernzomatic-aluminum-brazing-and-welding-rods-two-12-inch-rods](https://www.desertcart.dk/products/8696022-bernzomatic-aluminum-brazing-and-welding-rods-two-12-inch-rods)

---

*Product available on Desertcart Denmark*
*Store origin: DK*
*Last updated: 2026-02-26*