





Desertcart purchases this item on your behalf and handles shipping, customs, and support to Denmark.
๐ง Freeze your print failures, not your workflow!
The BIQU CryoGrip Pro Glacier Panda Build Plate is a premium double-sided spring steel sheet designed for the Bambu-Lab A1 Mini 3D printer. Featuring a unique 7-layer polymer construction, it delivers exceptional adhesion for PLA and PETG filaments at low temperatures, while its heat-insulated honeycomb handle ensures safe, quick print removal. Compatible with a wide range of filaments under 300ยฐC, this 184x184mm build plate offers warp-free, easy-to-clean performance that elevates your 3D printing experience.

| ASIN | B0DMSS3TQ7 |
| Amazon ๅฃฒใ็ญใฉใณใญใณใฐ | ็ฃๆฅญใป็ ็ฉถ้็บ็จๅ - 6,533ไฝ ( ็ฃๆฅญใป็ ็ฉถ้็บ็จๅใฎๅฃฒใ็ญใฉใณใญใณใฐใ่ฆใ ) 3Dใใชใณใฟ็จ้ ๅฝขๆๆ - 156ไฝ |
| Amazon.co.jp ใงใฎๅใๆฑใ้ๅงๆฅ | 2024/12/5 |
| ใใใใๅบฆ | 4.6 5ใคๆใฎใใก4.6 (429) var |
| ใตใคใบ | 184*184MM |
| ในใฟใคใซ | ๆฐทๆฒณ |
| ใกใผใซใผ | BIGTREETECH Direct |
| ไปๅฑๅ | CryoGripโข Pro Glacier Panda ใใซใใใฌใผใ |
| ๅๅใฎ้้ | 408 g |
| ๆขฑๅ ใตใคใบ | 28.19 x 26.49 x 0.89 cm; 408 g |
| ่ฒ | ใฐใฌใคใทใฃใผ-ใใซใผ |
| ้จๅ็ชๅท | USA6-1060000747 |
| ้ปๆฑ ไปๅฑ | ใใใ |
| ้ปๆฑ ไฝฟ็จ | ใใใ |
N**O
ใใชใณใๅฎ็็ใขใใ
ๆฌใขใคใใ ใฏใใใชใณใใฎๅฎ็็ๅใณๆถ่ฒป้ปๅๅๆธ็ฎ็ใง่ณผๅ ฅใ ไฝฟ็จใใใใชใณใฟใผใฏA1miniใๅฎ็็ใฏๅฎ็งใใใใใฎ่จญๅฎๆธฉๅบฆใไฝใใชใ็ขบๅฎใซ้ปๅๆถ่ฒป้ใๆธใใใฆใใพใใ
J**.
Phenomenal cold-printing adhesion and a gorgeous fine textureโeasily an amazing upgrade!
I picked up this BIQU CryoGrip Pro Glacier Panda Build Plate for my Bambu Lab A1 Mini printer, and it is easily one of the most amazing surface upgrades I have ever deployed [On Wed, June 03, 2026 @ 09:02 AM]. If you are tired of dealing with warped corners on wide-footprint PLA prints, or sick of scrubbing messy glue stick residue off your factory sheets, this specialized "Glacier" formulation completely changes the game for compact machines. Why this CryoGrip plate is a total masterpiece: Unrivaled Room-Temp Cold Adhesion: The proprietary chemical formulation on this sheet is incredibly tacky. I ran a series of dense structural models with my heated bed set to just 25ยฐCโ30ยฐC (essentially room temperature). The filament anchors down with massive initial grab force, making first-layer corner lifting completely impossible [On Wed, April 29, 2026 @ 15:24 PM]. Massive Workflow and Power Efficiency: Because your machine no longer needs to wait several minutes to heat a heavy aluminum bed up to 60ยฐC for every project, print runs start almost instantaneously. This dramatically speeds up rapid prototyping timelines and slashes long-term workshop power consumption. Beautiful Fine-Textured Matte Bottom Finish: Unlike the harsh, aggressive texture left by basic stock PEI sheets, the double-sided Glacier surface leaves an incredibly clean, fine matte pattern on the bottom layer of your parts. It does a phenomenal job of scattering light to completely mask visible infill path lines, leaving models looking injection-molded. Perfect Factory Alignment Constraints: At exactly 184x184mm, the plate slips cleanly into the A1 Mini's indexing rear pins. The nozzle-cleaning rear tab cutout is perfectly aligned, ensuring the toolhead calibration sequence doesn't scrape or hang up on the edges of the spring steel sheet. Crucial Setup & Handling Guidelines: Let It Cool Fully Before Flexing: This plate holds onto warm plastic with an iron grip. To protect the specialized chemical coating from bubbling or tearing away from the steel core, always let the plate drop fully down to room temperature. Once cooled, give the spring steel a gentle twist, and your parts will pop free effortlessly. The Freezer Trick: If you are printing a highly rigid or stubborn material that refuses to drop its grip, slide the entire flexible steel plate into your kitchen freezer for 5 minutes. The rapid thermal shock will force the plastic to safely pop loose on its own. Strict Maintenance Warning: Never wipe or wash this plate with harsh chemical solvents like Acetone, which will instantly strip the low-temperature coating right off the sheet. To refresh the extreme tackiness, a simple wash under the sink with warm water and basic dish soap is all it takes. The final takeaway: The BIQU Glacier Panda plate is a premier quality-of-life hardware upgrade that completely lives up to the hype. It eliminates the mess of adhesives entirely, boosts your daily output speeds, and provides ironclad first-layer reliability for a very reasonable price point. It has completely modernized my compact printing environment.
G**E
No More Glue Sticks
I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain. When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course). According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints. This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates. I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.
J**L
Works great on my Flashforge Adventurer 5M
I picked up this build plate for my Flashforge Adventurer 5M, which I run with the Forge-X Klipper mod. It went on without any trouble, and it has worked well since. Prints stick during the job and come off cleanly when Iโm done, so Iโm not fighting with parts or scraping at them. The surface has been consistent from print to print, with no problems so far. Iโd recommend it to anyone who wants a replacement or backup plate for their printer. Iโd buy it again.
J**R
Better Than the Factory Original
I bought this build plate to replace the one that came with my Creality Ender 3 v2 and it is a much better build plate than the factory one. I can print without additional adhesive and at a lower bed temperature. Well worth the money.
M**.
Wow Just Wow!!!
Ive done Hundreds of prints on my Flashforge AD5X and I can tell you first hand this is the best build plate I have ever used. No glue or any kind of adhesive, Its plain Amazing . Total game changer Like someone else said.
Trustpilot
1 day ago
2 months ago