Rocksett™ 1oz Muzzle Adhesive

This is one of my favorite thread locking compounds for mounting any type of muzzle device to a firearm. When I was in the US Army, this thread locker was the preferred brand of our armorer. The thread locker is so easy to use a caveman can do it, and it's nearly soldier-proof. The bottle has enough product to be a good value, but do pay attention to shelf life. I had a bottle of this on the bench for I don't know how many years and found it to be a solid brick. When you use this stuff make sure you want the item there, because once this stuff sets, you will need a decent wrench and some heat to break it free. Or get your muzzle so hot you can light cigarettes on it and use it for a signaling device. The item on the muzzle, if it hasn't welded itself to the gun, usually screws right off but use caution when handling cherry red metal unless you wish to brand yourself or a buddy.

Essential for fixing fasteners in a high temp environment. It is usually used for keeping muzzle devices on firearms because it is unaffected by heat. I used it to keep the nut on the fan in my circulating oven, as conventional crazy glue type products come loose with heat. It works like a charm and from reading the label is essentially non-toxic after cure (and possibly before?) You can find smaller one time use packages for much less.

Works great. This is what most manufactures supply with there flash hiders to keep them in place. in the size I purchased I could mount 500 flash hiders. I will dry up and turn into a solid before I could use a quarter of it. I recommend you use the inner seal after you use it and maybe it will last longer than a few years. This time I used it on 2 different 3-Lug suppressor adapters. No more suppressors loosening up during while shooting at the range for me.

Used it on a plan b mount for one of my cans and for a cherry bomb. Had to remove the mount and soaked it in boiling water for about 20 minutes and it broke easily, the only force I had to apply was about the same force as putting it on and the rocksett gave way. I’ve never had any issues on all my other cans taking them off at the range while hot or at home after a bit of fouling on them. Great stuff, works awesome. If you have any sort of high heat and hard use item, this is it. I had red locktite a Huxwrx flash hider and removing that was a pain, I had to use a heat gun and heat the crap out of it to where I felt uncomfortable or like if I was going to damage it, absolutely not the case with rocksett.

This stuff works great! I’ve used it in multiple muzzle devices and they are all holding perfectly so far.