Thermal Grizzly Duronaut - 2 Gram - Enhanced Durability & High Performance Thermal Paste - for Maximum Thermal Conductivity While Overclocking CPU/GPU/PS4/PS5/Xbox

As someone that has used Kryonaut for more years than I can actually remember, I wanted to try Duronaut out when I became aware of its existence. I did email Thermal Grizzly prior to buying to make sure that it was at least as effective as Kryonaut was (no point going backwards!) & was told that it is basically an improved version of Kryonaut but was given a different name as some people may prefer the consistency etc of Kryonaut. Performance-wise on an overclocked Intel i9 13900K cooled by an Arctic Liquid Freezer 3 360mm cooler (with Noctua NF-F12 Chromax fans & anti-vibration gaskets instead of supplied fans), the peak temperature was the same as Kryonaut after an hour of Cinebench multicore runs to ‘bed in’ the paste. There was no thermal throttling even being overclocked nor increase in fan speed than with Kryonaut. Application is a little easier as Duronaut is slightly thinner in consistency compared to the Kryonaut I have left to hand. Was easy to spread across the IHS with the supplied spatula. Value for money is also better than Kryonaut as it is a little cheaper gram for gram. The only thing I would like to see different is for the syringe to have what paste is inside it labelled on the outside as the syringe I got only had the Thermal Grizzly branding. This isn’t really a problem as I keep the syringe & applicators together in the outer packaging, but if you just put the tube in a drawer with other TG pastes, it could be easy to mix up which is which. Cannot give a long term use review as not had it for that long but for now it is performing as I would expect a TG product to. I wouldn’t use it for repasting GPU cores personally & the guy at Thermal Grizzly I communicated with via email also said the same. For GPU cores there are better products such as the sheet style TIMs. Would I rebuy Duronaut? Only time will tell but I do have high hopes for it going on what others I trust in the industry tell me.

Magic stuff. An absolute donkey to work with but well worth it. Bought the 6g to replace the tim and pads on my custom water-cooled 2080ti and now after an hour of crimson desert it's only topping out at 47 degrees. Absolute magic.

After a quick taste I could communicate with walls. Also works well as thermal paste. Dropped temps by 10C. Bit sticky and gooey but I think most of y'all have more braincells than I do, so you'll figure out how to use it.

This stuff is a game changer for low temps. After applying the paste I ran y-cruncher for 30 minutes with an i7 14700k at stock and my temperature never exceeded 74c. During Space Marine 2 which is CPU heavy my temps were in the 40's. Now on to the applying of the paste. I think it's a bit unfair that people mark this product down because it's more difficult to apply, Yes it is more difficult to apply and I could tell this straight away but the manufacturer provides a video of how to do it correctly. I followed the video to the letter and had absolutely no issues applying the paste although it did take a bit more time and patience. I wouldn't hesitate to buy this product again.

Not opened it but used this stuff before and its really good stuff small pee size and it works like a treat keeping a 9800x3d very cool if you are looking for t paste then this should be your number 1 go to

really high quality, comes with little tools, the stuff is mega difficult to apply though, it is sort of a sticky pad in a syringe, and unless you get it perfect it will sort of fold up! good performance though once it is applied, expensive but great for a laptop

I used the Thermal Grizzly Conductonaut (2g) on my CPU, and even though I applied a bit too much the first time, it still delivered fantastic results. After cleaning and reapplying carefully, I noticed a clear improvement in my temperatures — significantly lower under load compared to standard pastes. It spreads easily, and you only need a tiny amount to get full coverage. The consistency feels premium, and you can tell it’s designed for enthusiasts looking to get the most out of their cooling setup. If you’re confident applying liquid metal or high-performance compounds, this is an incredible upgrade. Just be careful with the amount. A little goes a long way. Overall, brilliant thermal paste that really makes a difference!

It's an absolute PITA to apply but to be fair Thermal Grizzly aren't secretive about this and do have videos on their site. Once applied though, this stuff is fantastic. Used it to repaste my GPU after a paste blow out on a 4080 and my temps dropped 10 degrees

J’ai utilisé la Thermal Grizzly (notamment la version Kryonaut) pour le remplacement de pâte thermique sur mon PC, et honnêtement on comprend vite pourquoi cette marque est autant recommandée dans le milieu du hardware. Dès l’application, on sent que le produit est sérieux. La texture est assez facile à étaler, pas trop liquide ni trop épaisse, ce qui permet une répartition homogène sur le processeur sans difficulté particulière. On n’a pas besoin d’en mettre beaucoup, une petite quantité suffit largement. Le vrai point fort, c’est évidemment les températures. Après remplacement, j’ai constaté une baisse visible par rapport à une pâte thermique standard. En charge (jeux, streaming, tâches lourdes), les températures sont plus stables et surtout mieux maîtrisées, ce qui permet au CPU de maintenir ses performances plus longtemps sans monter inutilement en chauffe. Sur un usage type gaming ou rendu, la différence peut ne pas sembler “spectaculaire” au premier abord, mais sur la durée et en charge prolongée, la stabilité thermique est clairement meilleure. C’est là que le produit prend tout son sens. Autre point important : la qualité globale et la fiabilité dans le temps. La pâte reste stable, ne sèche pas rapidement et garde de bonnes performances sur plusieurs mois d’utilisation, ce qui est rassurant pour un montage PC sérieux. Il faut aussi noter que c’est une pâte thermique orientée performance, donc elle est surtout intéressante pour les utilisateurs exigeants : gaming intensif, overclocking, streaming, ou machines haut de gamme comme un i9 ou un gros GPU. Points forts : ✔ Excellentes performances thermiques ✔ Baisse des températures CPU/GPU ✔ Facile à appliquer ✔ Bonne stabilité dans le temps ✔ Idéal PC gaming / haut de gamme ✔ Marque reconnue dans le monde du hardware Points à noter : ➖ Prix plus élevé que les pâtes thermiques classiques ➖ Gain surtout visible sur configs exigeantes Verdict : Très clairement une des meilleures pâtes thermiques du marché. Ce n’est pas un “gadget”, mais un vrai upgrade pour optimiser les températures et la stabilité d’un PC performant.

فاخر جدا❤️❤️

Zdaje efekt sprawdzony na i9-12900 i jestem mega zadowolony. Najważniejsze: ciężko się nakłada go. Są sposoby, aby na chwilę wsadzić do ciepłej wody, wtedy ponoć łatwiej się go rozprowadza.

This paste wasn’t easy to apply. Ultimately I just used my fingers vs. the spatulas given with it. But it definitely works. Brought my CPU temps down about 2-4 C when compared to Arctic MX-6 that I was using (which is already a great paste). I was hesitant to use it given some complaints about it being too sticky (which is correct) but then once you use it you know it was worth the money. Results are for an overclocked 9950X3D with an Arctic Liquid Freezer 3 Pro 360 ARGB with Lian Li Uni Sl V2 fans at 1250 RPM. Test I used to draw comparison was CB24 10 min multi core test. Arctic MX-6 max temp was 80 C Duronaut max temp was 77 C Ambient was 24 C Inside Lian Li 011 Dynamic Evo case with 10 fans at 1250 RPM.

Toppy,snelgeleverd, net als de beschrijving Komt alleen nog U.S TAX erbij