GuliKit OLED Thumbsticks For Steam Deck, Electromagnetic Joysticks Replacement with Original Touch Sensing, No Soldering, One-Key Calibration (Not for LCD)-SD05

Installing them is easy, they are fiddly to calibrate the little button is hard to press. Make sure you move the little cable when installing them otherwise it can catch and make noise.You also need to go into desktop mode and calibrate them there too using the console command thumbstick_calGot my dead zones down to about 3400 couldn't get them fully centre but I think that's coz I didn't take loads of time to get them perfect

Easy to fit with phone repair toolkit. Unscrew the 8 screws. ( dont forget to remove the micro sd before removing the back as I found out it snapping when changing the NVMe card last time)3 screws and the old pops out after removing the connector and cable.Put the new in slightly to the right and swing in as the top button switch is on the end of the pcb.Screw down and same for the other .Leave back off turn on and press buttons and recalibrate easy enough then screw back on and put card in . Its really that quick and easy.Centres better than oem and feels slightly more feedback on motion. Once calibrated and gyro reset the jitter goes and zero spot on. Will how long they last but so far, spot on.

Super easy installation and great quality. I bought these out of necessity from accidental damage to my deck but I am very pleased with these. They're an upgrade to the original hardware that works perfectly with the steam deck oled.Pair these with a simple ifixit kit and you've got an incredibly easy (14 screw) upgrade to you're steam deck.

Context: I have repaired electronics in the past and have replaced a few shells for switch and PS4 controllers, as well as replacing the shell of my steam deck at the same time as installing these sticks.These upgrades were super easy to install, fairly non-intrusive, almost plug and play. Calibration is quick and painless in desktop mode, simply following ifixit tutorials made this mod a breeze. Highly recommend for any nerds like me who enjoy playing games on deck

They are good came packaged well and deliver was fast install was easy when I watched you tube video. The only complaint I have is the left stick is slightly out of allingment but it is not noticeable when playing but It shows up in the allingment tool in the steam OS.

Love them, easy toninstall and gives a quality addtion to the steamdecknworth every penny

initially i bought and fitted the handdiy hall effect joysticks .. but for some reason they felt off ..when i replaced them with this i realised then oh boy were they off ... these are far far superior more accurate way easier too set zero point .. fantastic feeling and don't have the weird unwillingness is the only way i can say itim glad i swopped out for these .. brilliant buy

Super easy to install and very happy with it. However it didn’t come with any instructions and had to research it. Quick delivery and amazing quality super happy with it

ÓTIMO PRODUTO... RECOMENDO O VENDEDOR!!!

Una maravilla

Remplacement idéal des Joystick de base du SteamDeck OLED, en effet, la techno Hall garantie qu'il ne drifteront jamais.Le remplacement est relativement simple (il faut quand même démonter le Steamdeck, mais ça n'annule pas la garantie si vous faites attention en le faisant), pas de soudure à faire pour récupérer le fonctionnement capacitif du joystick puisqu'ils sont livrés avec leurs propre pad.

Finally decided to install these after having them for months. Installation was super easy. The hardest part was separating the back of the shell of the steam deck after removing the screws.Don't forget to calibrate the sticks before closing the system back up. There are tiny little buttons on the board you need to press while in the calibration settings in order to get the best deadzones out of the sticks. The shoulder buttons function the same as the original ones as well.

These are a great replacement for a busted joystick on a handheld gaming system. I bought a IFixIt kit to help with installing the joysticks and it was extremely easy to do and much cheaper than the company had quoted (albeit a scary experience for a first timer).So far I haven’t had any issues with the joystick and can barely tell the difference between the original joystick and these. The biggest thing is to pay attention to a good step by step instruction manual. Plugging in all the necessary cords is definitely necessary.It’s been a few months and the sticks are still in good condition. Overall I’m happy with my purchase and find the joysticks to be quite good. Overall it’s a good value for the price.