BIQU CryoGrip Pro Glacier Panda Build Plate for Bambu-Lab A1 Mini 3D Printer, Double-Sided Fine Textured Spring Steel Sheet, Firm Adhesion,184x184mm, 1 Piece

This build plate has made a noticeable difference in my 3D printing experience. Adhesion is much more consistent compared to the stock surface, and prints stay firmly in place during printing without lifting or warping. Once the bed cools down, parts release easily without needing force, which helps avoid damage to prints or the surface. The double-sided texture is a nice bonus, giving flexibility depending on the type of finish you want on the bottom of your prints. It feels durable and well-made, and it fits my printer perfectly without any modifications. So far, it’s handled multiple prints very reliably, even with larger models. Overall, this is a solid upgrade for anyone looking to improve print adhesion and make bed removal easier and more consistent.

I have a Prusa Core One and a MK3.5. Us the on the Core ONe to do oversized prints and it works great. Adhesion is very very good, almost better than you'd want, but you won't have to worry about a print popping off the build plate after that first layer. TIP: do yourself a favor while you're waiting to get this steel sheet delivered. Go to an auto parts store (Autozone for me) and get a plastic scraper that has the changeable plastic "razor blades" in it. Mine is grey with orange blades and my older one is blue with orange blades. They'll be in the aisle with the sealants and adhesives and fasteners or just get it on Amazon. Search for "plastic razor blade scraper" and there are a blue million hits.

The build plate came sealed and perfectly protected, no damage at all. I’m using it with my Bambu Lab P1S, and I’ve since swapped it in place of the standard textured PEI plate. If your printer doesn’t have the QR code reader, just remember to manually adjust your build plate settings—it makes a big difference in print quality and adhesion. What I Like: Adhesion is excellent, easily better than the original PEI plate. Prints stay firmly in place during runs, even larger or more intricate ones. The surface feels durable and high-quality, and it’s clear this plate was built for reliability. It’s been great for detailed or tall prints where strong first-layer grip really matters. What I Don’t Like: That same strong adhesion can be a double-edged sword—it makes removing prints a bit tougher. You also can’t really print rafts or very flat items directly on this plate because they’ll stick too firmly. It just takes some tuning to find the right balance in your print settings. Would I Recommend It: Yes, for anyone looking for stronger adhesion and more consistent prints than the stock plate provides. Just be prepared to tweak your settings and handle removal carefully. Once you get it dialed in, it’s a solid upgrade.

Using it most of the time now. Works great, smooth and has great "sticking" properties. Worth the investment, especially if you need a smooth plate.

Better than the stock AD5X plate, everything sticks including the more delicate or small surface area prints, things pop off relatively easy. So far I've only used PLA but PETG and TPU are usually stickier so I imagine it won't have any problems with those.

Works pretty good. Fits the FlashForge AD5M / Adventurer 5M. Seems best suited for PLA and ABS. Stickier filaments such as PETG or TPU adhere too well and will likely damage the plate very quickly. Prints do NOT automatically release from this plate like they do with a powder coat textured PEI sheet or a smooth PEI sheet. It is more like BuildTak or what came with the Ender 3. It's still best to heat your bed up but you can use much lower temperatures. PLA will print no problem with no heating, ABS will print okay at 90° rather than 110° This would be great for use with: PLA, ABS, ASA, HIPS, Nylon, Polycarbonate. I wouldn't necessarily use this with: PETG, PCTG, TPU, TPE, Polypropylene

I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain. When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course). According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints. This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates. I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.

Excellent Build plate, Great balance between plate adhesion as well as removability. I exclusively use the crygrop build plate now because I also enjoy the satin surface finish it gives my prints. I ordered 8 BIQU plates from them, I did have to have 2 of them replaced as the quality of them was not up to par and the prints would not stick despite through cleaning with soap and water. The replacement that was sent was great and worked as advertized.

youtube等で言われている通り、剥がれに強いというか強すぎる！くらいです。 あまり大胆な設定変更はしていませんが接着力の強さから安心していろいろと試すことができます。 1枚は持っておいたほうが良いプレートだと思います。

プレートへの食いつきが抜群でプリントミスがほぼゼロになりました 逆に食いつき過ぎて剥がすのが大変ですw

PETGにとても良いです。 きちんとくっつき ちゃんと冷やせば剥がれる。 問題は、公式のプレートの方が安い。 品質はよいですが、公式ほどでもなく高い。 本末転倒。

とってもよく着きます。剥がすのが大変なくらいです。小さいものは剥がしにくいです。大きなものであれば安心してプリントできます。40°でも充分です。

配送に時間は掛かるけど食いつきよく仕上りも気に入ってます。