Restored Headlight Clear Coat - 200ml

ممتاز جداً شكرا على التحفه الفنيه الرائعه انا راضي جداً

I did lots of prep on the affected car headlights, which were very bad, using one sheet of wet and dry at 400, 800 and 1200 on each headlight, so a total of six sheets using the entire sheet each time. I also used it wet, not dry. It did not look like it was going to work as each time I washed the headlights with clean water they still looked obscured. However, as soon as I sprayed the lacquer on it transformed them and they now look almost like new, a massive improvement. The only thing I have noticed is that when it rains it leaves marks on the lenses where the water droplets have sat but they wipe off and it still looks good. Do not be impatient with how much you spray on, its not worth it. Take the extra time, keep the coats thin and let them dry before applying more. I was borderline with lacquer build up but just got away with it. I spent a lot of time doing the prep and should have been just as patient applying the lacquer.

Don't assume this product will suddenly and magically restore clouded and dull car headlights. You need to do some work removing the scratches and film build-up on what was the clear plastic lens covering the headlight. Ultra violet rays from the sun, weather and minor stone chips create a deterioration of the manufacturer's UV protective coating, which needs to be removed. You will need to do some wet and dry sanding using variable grit densities followed by polishing with a mildly abrasive liquid compound, by hand or with an electric polisher, will restore the headlights to their original quality and brightness. An hour's work on each headlight will bring those headlights to a gleaming finish. Then, to complete the process and protect the lens from future deterioration, the E-Tech clear coating is applied using the spray can. Follow the instructions that come with the can to get an even finish. This product, with two passes over an hour or so and left for 24 hours to dry hard, is perfect and the results I got were excellent. Put the work in first and you will not be disappointed.

I applied this after spending a lot of time buffing and polishing a UV light damaged polycarb headlamp cover, so good to find a UV protective, polycarb compatible glaze. I'm no stranger to using aerosol paint sprays, but the polished cover looked slightly better prior to using this than afterwards, perhaps owing to some overspray which I'll tackle at a later date. The instructions are clear and easy to follow, but there is scope to make a mess of it if unused to spray painting.

Although you can get headlight restoration kits containing cleaner and protective wipes, this was the only product I found at a reasonable price which was just the protective coat on its own, without the cleaner (I already had a bottle of Turtle Wax headlamp cleaner). It is easy to apply, you obviously have to clean and prepare the headlamp beforehand and mask off the rest of the car so you don’t overspray onto the body work. You get an included IPA wipe to give it a final clean before applying but I used my own IPA spray. After that it is just 2 applications. The results look good, my headlamps are clear and hopefully this will at least prolong the periods in between restorations. I fully recommend this - there is no point removing the yellowing from headlamps without applying a protector afterwards. I expect this can to last several applications but the only negative is that only 1 IPA wipe is provided so you’ll need to get some more for subsequent applications.