18057 a18057 Heat Shrink Tubes Replacement for DYMO 18057 3/4" 19mm

Using these w/ Rhino 4200. They fit well, print well and shrink well. Solid product.

really handy for work and on my car projects. This really helps when other people might have to work on something you modified. Completely compatible with my DYMO label maker. I just use a "crack lighter" to shrink it down.

I just finished using several of these cartridges for rewiring/upgrading our HOA Clubhouse sound and IT systems. I generated the labels using a Dymo Rhino 4200 labeler(another 5 start review to follow). Having retired I don't have access to my former employer's Brady labelers. The product is excellent and far more economical than Dymo's equivalent product. The Brady equivalent is even more expensive. Lettering is sharp and durable. If you haven't used heat-shrink wire labels before try shrinking them by heating on the opposite side of the lettering. Then tighten in up if needed on the letter side. This will make a tight wrinkle free label every time unless the label was too big to begin with. 1/2" works perfectly on standard CAT5 cable. With some of the thicker shielded CAT6's and above you might want to go to 3/4". Shrink wrap labels 1" and below will not fit over any connector.

I use the Rhino 5200 in the field for work and purchased the Dymo 3/8" heat shrink tube cartridge. The print turned out fine but the on board cutter would not cut the tubing. I had to waste excess tubing just so I could manually cut with my knife. I went to reorder more cartridges and came across this 4-pack for the same price as one Dymo cartridge when it's on sale. I thought for $25 let's give it a shot. Man was I impressed! The print turns out nice and sharp and best of all it is soft and the on board cutter cuts clean through with no issues! It also shrinks just fine when a heat gun is applied. Highly recommend and I will be stocking up.

I had previously written a review quite critical of this product, before I had actually shrunk any printed labels. Since applying several, I have to report these labels shrink as well as the brand name product, and the quality of the print actually improves with shrinking, so the results are adequate & legible. This is important to me because I have dozens of 22AWG (very small) wires to label so they can be installed properly, and referenced later, as needed. So, I felt to be honest, I must update my review, and now feel that since I have so many labels to make, this was the best choice for me.

ON TIME

The ability to print on heat shrink is great. They work well for the applications I need them for

EXCELENTE

This product worked perfectly in my Labelwriter 450 Duo, which isn’t commonly known to work with heat shrink tubing.

These are great. Do exactly what you want

Es gibt nichts zu beanstanden. Funktioniert problemlos mit den günstigsten Label-Writern, welche diese Art der Kassetten verwenden...

Always ordering these

Used these as replacement for the originals. Seem to work fine, also outside under UV exposure. Happy with it so far.