Low Profile Thin Drip Tray & 6 Bar 9 Bar 12 Bar OPV Spring Modification Kit & Long Stainless Steel Tube, Compatible with Gaggia Classic Pro Traditional Espresso Coffee Machine Parts

Perfect fit. I have taller coffee mugs, so this drip tray paired with a naked portafilter allows them to fit on the tray.

The Gaggia E24 is such an improvement over the earlier models - the copper boiler makes all the difference! However, Gaggia really needs to improve on the cup size that will fit between the portaflter and the drip pan. I prefer americano and cappuccino coffees but the cup size I would like to use doesn't fit even after I replaced the Gaggia portafilter with a bottomless one. So, I replace the drip pan with this low profile pan. The product description doesn't state that it fits the 2024 E24 but as the attached picture shows, it fits fine. The two small rubber feet on the bottom of the pan locks it in place when installed such that you have to lift the pan slightly to remove it. Great, no sliding out when removing the scale like the OEM one! The low profile pan is the same wall thickness as the OEM pan - not some cheap thin stuff. The drain pipe supplied with the low profile pan fits fine and the rubber burn block (Gaggia's name for that rubber on the drain tube) slipped on easily. After looking at several drip pans on Amazon and elsewhere that were all more expensive that this one, I figured, what the heck, that I would it a try. I'm really glad I did as I couldn't ask for a better drip pan. Same quality of construction as the OEM pan, it fits my E24 like the OEM, and now I can use my larger cups with the scale.

Great upgrade for the machine.

Love this product! Allows to a little taller of a mug!

This is a pretty mandatory upgrade to the GCP, and I would recommend this option for its affordability and build quality. Having said that, my unit has a single stray burr that sliced the tip of my finger, so be careful.

The low profile drip tray fits really well. The extended SS tube is also good and fits OK with a little wobble at the end. I have not installed the included springs

Bought to adjust pressure and to have a thin drip tray to accommodate a scale. Tray and tube are great and fit perfectly with my machine. Highly recommend. However, don't make my mistake and do your research on whether your machine is spring actuated for pressure or screw adjusted. I have a gaggia classic (not pro) and mine is actually screw adjusted. So the springs are of no use to me. My mistake, warch some tutorials for your machine online.

Fits with E24 model. Low profile. Haven’t changed the springs yet.

La bandeja original no permite ver el nivel de agua del tanque cuando esté ya está bajo, está si lo permite. Su profundidad ha sido suficiente para capturar el agua generada al limpiar el porta filtro en una sesión de hacer espressos . El material está OK, no se ve mal y está hecha a la medida, Aún no uso los resortes para subir los bar pero se ven bien hechos.

Nice

Tray made to a nice standard. Also installed what would be the 9bar spring and is pulling good shots at correct ratio for espresso

Das verlängerte Spülrohr ist etwas zu dünn, dadurch wackelt es und bleibt gerade so an der Maschine. Die 9 Bar Feder hat bei mir keinerlei Wirkung gezeigt. Einzig die Auffangschale macht einen guten Eindruck. Ich würde mir das Set nicht nochmal bestellen.

Muito boa bandeja.