YAMRON 4-in-1 Soil Moisture Meter, Digital Plant Temperature/Soil Moisture Test & PH Meter/Sunlight Intensity, Backlight LCD Display for Gardening, Farming and Outdoor Plants

This is the only digital soil meter on the market. All others utilize a magnetically operated needle, that swings in front of 3-to-5 scales. As a result, the user gets rough estimates instead of actual numbers. . It is also one of the few that requires battery power to operate. An electric charge is emitted into the soil and is received in the probe. A circuit board measures the tiny changes and reports the results in digital form. Many competing devices use no batteries. I wonder how their diagnoses work without electricity? . I took the meter to task on the first day. The initially readings were off. AMBIEN LIGHT measured 0, although the meter was under a grow lamp. SOIL MOISTURE measured 95% - very wet, although the dirt was only moist. . After a "break in period" of one day, I tested again on the second. The features proved accurate. On the TEMPERATURE feature, I measured room air. The temperature was 1F higher than my oven thermometer and room thermostat. . . . Excellent! . To test the PH feature. I wet a face towel with water. It achieved a 7.1 reading - neutral. Water was neutral. . . . . Then, I wet a spot on the fabric with vinegar. The reading was 6.0 - slightly acid. Although vinegar was 4% acetic acid in distilled water, I expected a strongly acid reading. So, the PH feature was off by a half notch. . The MOISTURE feature worked to perfection. It measured the potted soil at 20% - dry. Examining the dirt, the moisture held the dirt in clumps, but it was relatively dry. . The AMBIEN LIGHT feature was good. Three grow lamps shined on my 10 juniper seedlings in pots. Each light source had a 100 watt grow bulb, with a 1700 lux rating. Putting the meter under one, it measured 2640 lux. With the added indirect light from the two other lamps, the reading seemed correct. . In the past month, I purchased three other competing soil meters and returned all. They tested grossly inaccurate, or some of their features were inoperative. . On this product, the features worked to perfection, except for PH - half correct. A second problem was missing the ability to measure FERTILITY. A third problem was the small text on the screen for TEMPERATURE and MOISTURE readings. They were very small. Other than these three shortcomings, I ranked it the best among the many soil meters available on Amazon. . . ------------------------------------------------------------------------------------------------------------------------- . . UPDATE: After two months of usage, the unit became non-functional. First, it no longer showed moisture. Second, one-fourth of the LCD screen went blank. . I contacted the vendor for warranty repairs/replacement. Within an hour, it responded with a request for a video of the unit in action. In compliance, the unit was turned ON. The regular screen appeared, indicating NO PROBLEMS. .

Such a great gift for anyone who loves gardening. It works well and makes it easy to check soil conditions without guessing. Pros: easy to use, helpful for plant care, great gift idea Cons: none for me Would I recommend? Yes—perfect for plant lovers

It works as intended, but I was primarily hoping to use it as a more precise indication of when and how much to water, especially for my indoor houseplants. It's almost too accurate for this- it will display the moisture reading for exactly where the probe is. That means that I can move it a cm down, up, or to the sides and the reading might be different. Interesting data that my soil doesn't spread moisture evenly, but not the data I was looking for.

This was a little bit more expensive but it is so accurate and worth it I have used the model from burpee sold at Home Depot and other local nurseries and I’ve been struggling with my berries this year with the PH so I figured I would buy a 4 in 1 and I’ve verified the numbers back to back and it is right on every time I check so for a few more dollars it is worth it my meter I’ve been using almost had me adding soil acidafier fertilizers vinegar and water the few extra bucks is cheaper than new plants I’m a believer 👍😎

Very nice design and easy to use. Also appreciate the Ph reading...helps to know what your plants are eating.

A great monitor for all plants, make the readings more readable and accurate. Thank you.

This 4-in-1 soil probe claims to measure moisture, temperature, pH, and light. After testing it alongside an analog probe, I’d say it performs well in two areas, is questionable in one, and underwhelming in another. What it does well: Moisture – Accurate and easy to read. My analog probe uses a 10-point scale, while this one gives a percentage. After recent rain, this probe still showed high moisture in my tomato buckets, which matched the heavy feel of the soil. Temperature – Very helpful. I've been monitoring heat in different colored buckets (thanks to some advice from ChatGPT), and this has helped me take steps to manage soil temperature, especially during flowering and fruit set. Backlit Display – A nice bonus. I usually check plants in the evening, and the digital readout is much easier to see than trying to guess readings on an analog dial. What’s uncertain: pH – Still evaluating. It read distilled water as neutral, which is promising, but it doesn’t match my analog probe. I’ve ordered a third method to verify accuracy. If it turns out to be reliable, it would explain a lot about some of my plants' struggles. What falls short: Light Measurement – Disappointing. The meter maxes out at 9999 lux, which isn’t enough to measure full sun accurately (often 60,000+ lux). It gave the same reading for full sun and shaded areas under 40% shade cloth, so it's not sensitive or accurate enough to guide grow light or shading decisions. Also worth noting: lux measures light visible to the human eye—not necessarily what plants need. Bottom line: This is a good option if you're looking for a combined moisture and temperature probe, and possibly pH once verified. But for measuring light—especially for gardening or grow lights—this isn’t the tool. Ask ChatGPT for better light meter suggestions. UPDATE: I returned it. I conducted a calibration experiment with distilled water, alkaline water, and acidic water (1/2 cup H20 to 1 tbsp of distilled vinegar. I started with the distilled water (which should read 7 - neutral) and the calibration was off from the get-go. My analog probe read it correctly, but the digital read it at 4.2 pH. If you purchase run this experiment to see if the sensor is working for you.

I use this every week to check my 20 or so indoor plants to see if I need to water them. It prevents over- or under-watering. I can put it down in each pot and adjust the angle of the screen to easily see the numbers. I used to use a dial one; this one is far superior to my old one and worth every penny.

Perfect for my gardens and plants. Easy to read and interpret. It provides the info I need to ensure I have the correct balance for my plants. Nice device!

Works well

精度は良いみたいです。 使いやすいので説明書はいらないです

Good quality

Really good, so far. It shows *all* the 21 plants at 95% moisture. So either all the plants are good or ? Will update as it goes. Works really fast, also.