2-4" Lift Front Upper Control Arm for 2019-2024 GMC Sierra 1500 2WD 4WD，2019-2024 Chevy Silverado 1500 2WD 4WD - OE Stamped Steel Suspension Arm with Ball Joint

I do not have any dislikes about these Upper "A" arms that I purchased from this seller/company. I am originally an Automotive Engineer for an American Automobile Manufacturer having designed chassis for over a decade with my experience, I like the quality, fitment, and ease of installation of this product. Having installed a spacer block to the top my strut to level my truck the stock "A" arm was under a lot of stress, therefore driving this truck cross country and back from Ohio to Yellowstone Park and back had shown a lot of stress and wear on my stock "A" arm and so I sought a replacement. I had come across this mfr./supplier of OEM Aftermarket products for replacing the worn "A" arms and ordered these. Didn't know what to expect really, but when they came in the mail I carried the heavy box into the house, unboxed, and inspected them, meticulously without putting them through a full optical or x-ray penetrant inspection, I could see these were quality parts. Once I had installed these parts and having a couple thousand miles on them since mounting them last week, the ride, feel, and look of my truck is great! I fully recommend these for anyone who is looking for cost effective quality replacement for your stock components, with a rugged off road quality and look. 100% happy!

Great product and they work great and they were a perfect fit.

Heavy duty components great finish no noise super durable seems more stable on the road greas zerts

I had my mechanic install these for me so I cannot give details on difficulty of installation. They are a direct replacement and fit just fine. The mechanic said that he thought these were a good product. He didn't report any problems with them at all. I did see some reviews that said there might be problems long term, but so far I haven't had any issues.

I saw many different Upper Control Arms on Amazon. Be sure to read the reviews guys! STAY AWAY from the China made Painted red ones! Unless they are Rough Country your good. Anyway, back to these monsters. The package came quickly and was packed well. Install took about 4 hours, and you DO have to take the shocks out to reach the bolts. Make sure to have a grease gun as the Ball joints are shipped dry from the manufacturer. Also make sure the zikr fittings are tight... Mine were lose but it was a simple fix. I used 6 pumps of grease prior to install. After I set my pre-load on the arm of the bolts, I dropped the truck and did another half turn to tighten them up. "After the shocks" are put on and the tire is on of course. The grommets will grab so you only have to use the outside bolt to fully tighten arm bolts. After the first drive I could feel the front suspension spongy like. I had MUCH more articulation over bumps. The truck did sit a little lower after install. I think that was from my stock Arms being bound up at the ball joint? I have the 3.5-inch lift kit from Rough Country but didn't by the arms that came with some of the kits, so that's why I bought these. You won't be disappointed. These Upper Control Arms are Heavy Duty! They are well built and covered with a tough powder coating. I'm impressed, but i only had them installed for about 200 miles so we will see what the future holds.

Fit good, but they do rub with stock 18” wheels. I have the OEM wheel on 275/60 and they rub against the control arm when turned all the way. The grease zerts wouldn’t take grease

They seem ok for the price but the instructions are horrendous and the company making these clearly doesnt test properly- they come with nylock nuts instead of castle nuts which is odd in and of itself since theres no way to cotter pin the nut to the ball joint.- but the instructions clearly say to install with nylock nut. What you’ll find is once you thread the nut on and make contact with the nylon portion, the entire ball joint will spin inside the boot with no way to hold it while you tighten down the nut. If you buy these do yourself a favor and toss the nuts they come with and reuse your old castle nuts. Also- the 8 large washers included in the package are for the long bolt that holds the arm on. 4 per side

These are very nice. REALLY put them through the test as holding strong. My mechanic said these are better than stock. My stokers lasted 23 years. Time will tell but very pleased with quality and price.

Fais parfaitement sur un 2026 !

These seem well made and look nice. But the ad is innacurate by pointing out that there are grease points on the bushings. There are no grease points at all. The whole reason I bought these was due to the grease points. Without them these WILL start to squeak loudly and you will not be able to stop it, they will also wear out prematurely.