Bilstein 24-196284 Single 5100 Series Front Steering Stabilizer fits 2008 2016 F250 F350 Super Duty - Reduces Steering Vibrations - Improves Handling

Worked great, I already had this exact shock in place but when I was replacing the drag link the old one was seized in and damaged. Threw this bad boy in with a brand new drag link and tie rods on my 14 F350, worked great. Lot easier with a new one going in than taking the old one out!

Awesome! I received the stabilizer and immediately installed it on my truck. It took about 30min to install, super easy and fit right into place. The factory stabilizer was shot, pretty sure it was original and never been replaced. Truck has around 156k on it and had crazy death wobble. After installing I took it out for a test drive and it was awesome. No more death wobble and it has taken 95% of the harshness out of the steering wheel.

2016 Ford F-250 Lariat 4X4 crew cab with 112K Miles on it.. I was having a lot of vibration and feedback in the steering wheel and used this to change out the factory steering stabilizer. Huge improvement over OEM. So satisfied, I ordered Bilstein 5100 shocks for my truck, huge improvement in ride and handling as well. Both easy installs. I had to use a small floor jack to compress front shocks for installation into the bottom shock rails.

This Bilstein steering stabilizer is of very high quality and looks great, very superior to the oem stabilizer. Take my advice and order a cheap “pickle fork” or ball joint separator tool when you order this stabilizer to help you remove the old stabilizer from the drag link, with this tool the entire job will only take you 30 minutes, without it, it may take you 3 hrs of trying to beat the thing out! I installed this on a 2016 F250 and it fit great. My truck has about 55K miles on it and the stock stabilizer was fairly worn out and no longer decompressed. After installing, the steering is tighter and no shutter when hitting rough spots in the road. I don’t think I would call it “night and day” but it is an improvement and looks great. You’ll need a 15 mm socket, an 18mm deep socket, and a pickle fork and decent sized hammer. Unit comes with necessary hardware (you will reuse the oem bolt on one end of the shock and supplied nut and washer for the other end).

Easy insulation. Held up well. Still had them on truck past couple years till I traded truck in.

Product was easy to install, looks high quality and dwarfs the stock damper. Steering is much smoother throughout the range than stock with no noticeable slop. However the steering feel is actually lighter in feel than the stock unit, could be good or bad depending on your preference. My rig does not have issues with death wobble I simply upgraded for piece of mind.

Used it actually on a 2006 F250. But replaced the factory one and worked great!

5+ years. Still going strong.

Steering shock fit as advertised, made a big difference in handling and ride. 2016 F350

Bueno

High quality replacement damper at a fair price. It will help immensely with standard front end play if this is your issue. If your hoping for it to correct or eliminate death wobble on Ford super duty , this isn't the answer .

At first it looked much to big, 2013 F250 4x4, so did more research to insure it was going to work before I wrecked one on pickup(or potentially wreck it taking it off) but it does fit and did actually help on our rough Saskatchewan roads. Plan on having pickup for a while so spent the money on the bilstein with lifetime warranty. Truck had some death wobble issues, haven’t had it installed long enough to know how much it’s going to help in regards to that buy hoping it will be better.

No issues