---
product_id: 61102694
title: "Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015"
brand: "burkhard kainka"
price: "1012 kr"
currency: DKK
in_stock: true
reviews_count: 4
url: https://www.desertcart.dk/products/61102694-franzis-make-your-own-bat-detector-kit-and-manual-hardcover
store_origin: DK
region: Denmark
---

# Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015

**Brand:** burkhard kainka
**Price:** 1012 kr
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 by burkhard kainka
- **How much does it cost?** 1012 kr with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.dk](https://www.desertcart.dk/products/61102694-franzis-make-your-own-bat-detector-kit-and-manual-hardcover)

## Best For

- burkhard kainka enthusiasts

## Why This Product

- Trusted burkhard kainka brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Full description not available

## Images

![Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 - Image 1](https://m.media-amazon.com/images/I/71y8emjIHJL.jpg)
![Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 - Image 2](https://m.media-amazon.com/images/I/91qc1koGWBL.jpg)
![Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 - Image 3](https://m.media-amazon.com/images/I/81j4iW4D-QL.jpg)
![Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 - Image 4](https://m.media-amazon.com/images/I/81B1UlTBCYL.jpg)
![Franzis Make your own Bat Detector Kit & Manual Hardcover – 30 July 2015 - Image 5](https://m.media-amazon.com/images/I/81CZbZvN20L.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ Bats from the belfry
*by P***C on 17 August 2017*

Most summer evenings we get bats flying through our back garden. So I had a sudden desire to be able to hear them as well as see them. After looking at bat detectors, most of which are £100 or much more, I decided this kit at £20 ish, would be adequate. The kit finishes up being built in a thick cardboard box and requires a bit of soldering. Assuming you own a soldering iron (and can use it) , solder, wire cutters and have about an hour to spare, building the kit is fairly straightforward. The instructions are reasonably easy to follow and our detector worked first time, incidentally you will need a PP9 battery. At the risk of patronizing everybody to death: bats use very high pitched squeaks of sound and listen for the sound reflected back to detect objects and insects etc. The sounds bats emit are far beyond the frequency range of human hearing, so the detector essentially converts the bat sounds down to a frequency that humans can hear. In practice, we found that passing pipistrelle bats were easily detectable at about 50 metres. You will hear a series of clicks as the bats find their way about. I have also found that if you flick tiny pea sized pieces of bread into the air in front of passing bats, they will home in on them as they probably look like a tasty treat to the bat, however they will discard them and it probably annoys them so only do it a couple of times out of interest. The volume and frequency of the detector may be changed to suit the type of bat you are observing (as different species of bat emit sounds of different frequencies). However, since there is no way of reading the frequency being detected, it is largely down to trial and error. In conclusion: if like me you just want to hear passing bats and can solder a bit, this kit is probably for you. Perhaps if you are then sufficiently interested, you may then move on to a more advanced device.

### ⭐⭐⭐⭐⭐ An absolutely brilliant product!
*by O***R on 11 August 2020*

This is a superb product for those of us who want to hear bats! For just £20 the kit has been extremely well thought out. The instructions are clear, but do require very careful reading and a dry run with components so that you understand the orientation and don't confuse any of the parts.This kit requires precise soldering, a narrow point on your iron is a must. I found using thin, cored best, and I adjusted my iron to 250 degrees (you may not have this option). I also recommend getting a small pair of wire snips and long nosed pliers for positioning the wires that hold the board in place and trimming them after soldering.Yes, it is fiddly but a little dexterity and planning and it all goes together beautifully. The box that it comes in becomes the detector's case and is quite sturdy. I held the battery in place with Velcro pads from my local stationer. I also keep it closed with an elastic band.I highly recommend this product, but only to those who possess the ability to make it and appreciate that it only costs £20, so don't expect a Rolls Royce!!!

### ⭐⭐⭐⭐ Good, but has some issues worth mentioning...
*by J***) on 22 May 2019*

The media could not be loaded. **EDIT 23/06/2020**Added a short two minute video of bats at dusk complete with the kit's audio in the background.***********************In a nutshell;Average build skills required, works well at a very good price and allows a cheap introduction into bat ultrasonic detection. Not really suitable for long-term or in the field use.Basics:You can get away with just a standard electronics (30-40w?) soldering iron, solder, ruler, snips / pliers, small flat-head screwdriver and a PP3 9v battery to make this kit, but a few other things that would make it more comfortable and which are worth mentioning to have to hand are;-Wire strippers; you can easily use your nails or teeth, but wouldn't hurt to have some handy.-Pliers / old scissors; to cut off excess component legs after soldering, and holding the control dial nuts when tightening.-Set of small sockets / spanners possibly for the nuts too.-Some sort of spring-clip "Holding" tool, to keep everything in-place as you solder it.-Adhesive / Hot glue gun / velcro pads / tape etc. to hold the battery in securely, and secure other parts as you see fit.Pros:-Very cheap option by comparison to other devices; over 50% cheaper than the cheapest ready-made bat detector available at present, as far as I can see.-Circuit board well made and of good quality.-User build guide was substantial and covers not only the build, but circuit and component theory, as well as aspects such as bat behaviour (but see caveat below)-User guide can live inside the cardboard case, as there's plenty of room.Cons:-Even with some soldering experience, I found completing the kit quite fiddly at times; I'd not build a kit like this for years and everything seemed so much smaller than I remembered to solder.-The guide does have some flaws aka mistakes that are likely to stop some people finishing it; the position of the four capacitors needed to be "worked out" from the images, and the omission of guidance for the transistor fitting process is a bad oversight. That said and with a common-sense approach, these aspects can be overcome.-There are no frequency markings on the box printed graphics, so when the manual and other guide books refer to 40Khz you must make an assumption as to where that "is" on the dial based on the minimum and maximum rated levels. I'd suggest making manual marks as reference points once established.-Being made of cardboard this does come across a device designed for limited use only, where the elements cannot get to it. For me and as I've said below, this isn't an issue as it's not something I intend taking "into the field" regularly and was bought and built more for a one-off curiosity use. If you want something to use season after season, you might want to look elsewhere or consider housing the the kit inside a more sturdy / waterproof plastic container as some other purchasers have done.Background:So, my reason for buying this "bat Detector" kit was because we've a number of bats that have started flying around our house at dusk, and with a curious seven-year old I wanted to see if I could do more than video them for her, especially when I was trying to explain how they fly and navigate by using "noises that humans can't hear".I had an inkling that they were expensive to buy and not really suited to my use, which was likely to be just once or twice and so I didn't want to spend too much money on one. Having found from some quick Internet searches that the cheapest was around £70 and that I could even pay £800 or more should I wish, I decided to look at other options.I tried contacting a few places to see if I could hire one for a short period but that didn't lead anywhere, but in researching that angle I stumbled across this German-made Kit from a company called "Franzis". In some respects, it seemed too good to be true; only £30 for a functioning bat detector, albeit it was part-built kit which just needed some finishing off.Build:Deciding that for £30 I would risk it I was very pleased with the quality of the kit; sold as a book, it comes as a cardboard-sleeved "box", hinged on one side and made of sturdy card (think of the birthday gift boxes you can buy from greetings card shops), pre-printed with some simple graphics. having slid off the matchbox-style sleeve, you open the box and inside find the rest of the components in a selection of plastic bags. Removing those reveals the box has pre-punched holes for the ultrasonic microphone, control dials, and a prebuilt slide-in speaker holder. Along with the parts comes an impressive-looking guide and user manual, which was more than I was expecting; I thought it was likely to be just a single sheet with poorly translated instructions, but this was a lot better, even with the few errors which I'll cover shortly. It went as far as explaining the circuit in use, ultrasonics in general and explained in clear terms what sort of performance to expect, and troubleshooting you could perform.Moving onto the actual kit and assembly, the first action is to push in the microphone, and control dials and get them in-place. The guide suggests you might need some needle-nose pliers to help do up the nuts that hold on the dials, but I found it was satisfactory to just use my fingers. A set of small socket wrenches might be useful too, to have ready. The speaker supplied simply slides into it's housing, and although the guide suggests using some adhesive to fix it in place, I found the fit was snug enough anyway... plus I didn't want to glue anything until I'd not only "dry-fitted" everything but also not until I'd assembled it and tested the unit thoroughly.Once that's done, the job of assembling and soldering the kit proper starts. This is very much a "finish it off"-kit and 95% of the parts are in place already. All you need to do is push one integrated circuit "chip" into place, four capacitors, one resistor, one transistor following the instructions for the correct polarity of the components, and solder some wire connections into place. These wire connections are made up using a large length of wire included which you cut to size as per the instructions. There's a lot given, so you have plenty over to cover mistakes. There's also the request to save any of the component "legs" you clip off as you build, as you'll need these later.Having followed the preparation guide, cut the required wires, tinned all the ends and so on, I started to solder in the parts. The IC was fine, but I hit my first snag with the capacitors; the guide references that there are four; 2 x100uf and 2 x 10uf, and names them one to four, but doesn't guide you to which ones you put where. Looking at the circuit board, it doesn't have the values marked at each capacitor's location, and doesn't use these names either...Overcoming missing manual information:After a bit of head-scratching, I looked more closely at one of the circuit board pictures in the guide (back and white, and not the best reproduction) and realised that you could see the two different sizes of the capacitors and that showed me where to put them; one big, one small, one big, one small, across and then down the board.The second snag came up at this point as I was directed to move on to the board connections to the external parts "now that the components were all installed", but I found I still had a transistor spare, and a clear place for it to go on the board. I re-read the manual a few times, and couldn't see any reference to this component at all. Using the component guide on the board itself for it's orientation, I soldered it where I believed it to go for now, but was disappointed at the oversight.So, with the seven components soldered in place I moved on to the inter-connections. This is where the clipped off legs from the capacitors come into use; You use them to make connections between the rotary controls, the board, and the speaker. Making these connections gives the kit a good level of rigity too. The final steps are to use the 5 lengths of wire you cut to length and tinned to make a few more interconnections and solder the positive and negative wires coming from the 9v battery harness.There are no instructions for fitting the supplied dials to the rotary controls, but this turned out to be a simple matter of loosening a grub screw in each dial, sliding it over the rotary control's post and securing the grub screw, once the correct notch position had been found (for the volume dial, it makes a satisfying "click" when it latches off and on, so I adjusted the dials white line marker to coincide with this point so I should be able to see when it's off at a glance). One grub screw was missing from a dial but I found this loose inside one of the bags, so no worries there.Build time was around 20 minutes in-line with other reviews.Testing:The manual covers testing and troubleshooting very well, and having inserted a battery into the harness, I was able to tune the unit as directed and ran a few simple tests using my fingers to produce ultrasound as guided and the unit performed perfectly; the range of tone changed correctly as I worked through the dial's range and I didn't notice any discernible "hiss" / feedback or anything from the speaker. The volume was fine for me too with no issues.Testing with real bats:**UPDATE 25/06/2019; I finally got a chance to test this when the bats returned recently, and was very pleased indeed by the performance; having seen a bat flying around and above my back garden I grabbed the device, connected the battery, switched on, set the frequency dial to about half-way between the minimum and maximum ranges, and the volume accordingly. Immediately as I pointed the device out of an upstairs window towards the bat I could hear the re-modulated sounds of the bat, and with a slight adjustment to the frequency dial, I "homed in" on the frequency to make it clear and loud.it was fantastic to hear the staccato ultrasonic sounds the bat was making, and hearing them change as the bat flew around and in different patterns... my immediate reaction was to liken it to listening to a "space battle" sequence of a film like say, "Star Wars", where the Tie Fighters zoom in, loose off a salvo of laser shots, then peel away again; as the bat heads towards you; the sound grows in volume, and then changes and eventually dies the bat turns sharply and away... until it's next "run".On another occasion, I'd not seen any bats but decided to leave the device on the window ledge with the window open, switched on and with the volume up. That way I could get on with something else, but still be in earshot in case it "went off". Sure enough, around 15 minutes later, I heard the unmistakable chitter of the device as a bat must have flow past close by.Very impressed with the tone, volume, and overall performance with real bats. ;-)Overall:Pleased with this on price alone for my limited use needs; Only wanted something for a one-off, but didn't want to pay £70+. I've not even bothered to fix anything more securely in place with tape / glue as it doesn't feel like it needs it. Might fit it into a storage container (like for sandwiches) if one comes my way. Even a ready-meal plastic lidded carton might work, giving a level of waterproofing. You could even use hot glue or similar to make it more waterproof. Keeping the detector in a sealed plastic container / tub and adding a packet or two of desiccant would also help guard against moisture ingress.Don't feel able to give it a full five stars due to errors and omissions mentioned above, mainly with the user manual.Worth mentioning that I wouldn't leave the battery connected if the device is to be unused for long period, say over winter; I'd unclip at least.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.dk/products/61102694-franzis-make-your-own-bat-detector-kit-and-manual-hardcover](https://www.desertcart.dk/products/61102694-franzis-make-your-own-bat-detector-kit-and-manual-hardcover)

---

*Product available on Desertcart Denmark*
*Store origin: DK*
*Last updated: 2026-02-19*