Goovilla Shelf Bracket, Heavy Duty Floating Shelf Brackets 6 inch Long, 6 Pack Brackets for Shelves, White Coated Metal Wall Shelf Support Brackets with 1/5 Inch Thick and 160 lb. Load Capacity

These brackets are very sturdy and feel high quality. The modern, clean look works great in a kids’ room, and they hold shelves securely without any wobble. Easy to install and strong enough to handle everyday use. Great value and highly recommend! Now I have piece of mind that the shelves will not fall and harm my toddlers!

We added these brackets to create floating shelves in our Lego room, and they’ve been exactly what we needed. Each bracket feels heavy-duty and solid, with clean welds and a sturdy finish. Once installed, the shelves don’t budge — even when loaded with dozens of Lego sets. Installation: The brackets lined up square and true, which made the process smoother than I expected. I drilled into wall studs for maximum strength. The included hardware is great, though if you’re planning to put serious weight on them (like multiple Lego Technic builds), I’d recommend securing to studs. Strength: Our largest shelf is holding several Star Wars sets plus a few modular city buildings — easily 50+ pounds combined. No sagging, no flex. That peace of mind is huge when you’ve invested hours into building models you don’t want crashing to the floor. Appearance: The matte black brackets disappear under the shelf, letting the Lego displays take center stage. It gives the room a clean, modern gallery look without distracting hardware. Note: The only small improvement would be higher-grade wall anchors for drywall installs. But with studs, these brackets are rock solid. Bottom line: If you’re building shelves to showcase collectibles — Lego sets in our case — these brackets are a perfect choice. They’re strong, reliable, and let the shelves blend into the background so the builds can shine.

Very sturdy and look great. Now if I can just get up the energy to install on the wall. I am not great with follow thru. Like that there are two options for putting up shelves, depending on what your will put on shelf. Will look great in our newly redone laundry room with black and white theme. Would recommend.

Very solid brackets. I used them to support 2" solid maple shelves, and they're up to the task. The order included matching screws and both drywall and concrete anchors, which is helpful.

very sturdy and easy to install. Hardware provided even included a small level.

Off the bat: the brackets are sturdy and they’re nice. the price differential is large compared to big box store offerings, and I’d like the fact that you can hide them pretty well. It’s a nice minimalist design. Now onto the relevant information that might set this review apart from others and hopefully guide you to install these so that they don’t look like junk. It is very nice that they include all of this hardware however, most of it is useless to me. The screws are what’s called posidrive (#2), which is a European form of the Philips head. have you ever assembled IKEA furniture and stripped out all the screws while you were installing it? That’s because you were using a regular Phillips bit in posidrive screws. Oddly enough, a couple of the screws are actually regular Philips head. Which makes things confusing. (look at the picture and the ones on the left are posidrive the one at the end is Philips. look at the picture and the ones on the left are. You can tell the posi drive by the four diagonal markings, and how the interior space is a bit larger than a normal Philips) What does this mean? Is it if you don’t use a posidrive bit by the time you get these things into the wall they’re going to look stripped out and the nice black finish is going to be missing. Do yourself a favor and get the proper bit or more appropriate screws the included screws are #8). Youd be surprised how complicated it might be to find black coated screws of the appropriate size and length…. so my advice would be to keep the screws but to get the appropriate bit. Honestly, it should probably be included. The drywall hangers are going to look bad, because they’re too large, and they will likely stick out the sides and be visible. the masonry anchors are OK but again I would choose something different. Since there are four holes per shelf, bracket you likely won’t get all four into a stud. That means for most installations into drywall you will need some form of anchor. You don’t need three different types of anchors. get one anchor that will work well in drywall and in brick, and in concrete I’m a big fan of Fischer anchors, the #8-10 masonry. A box of 100 is like $10 and well worth it. No I'm not some kind of clandestine marketing agent for them. I would suggest toggle bolts as the most ideal solution supporting the most weight in drywall. However, I think it will be hard to get them to appear seamless with four holes per shelf, bracket. Point is: listen to the guy whos used every single kind of drywall anchor or any other kind of anchor for that matter. The other drywall anchors either make a mess, pull out too easily, don’t form a firm grip in the wall, or cause other kinds of headaches that you just do not want to deal with…. the frustrations outweigh the potential gains of a nice new shelf. Anyway, I’m the kind of person who already has all of this junk, but I’m assuming that the vast majority of those purchasing these are not aware of these issues, and will likely lead to disappointments of various kinds. However, for the money, it’s a pretty good deal. If you need a bunch of these it would make a lot of sense to get the proper bit and better anchors. If I were the seller, I would not be providing 20 different kinds of anchors or screws with different drive heads. I'd get one kind of anchor that works excellent for all use cases, include the posidrive bit since its rather rare in the US, and maybe upgrade the bubble level - it would probably be the same cost or less as what they’re doing now and likely lead to happier customers.

Excellent brackets! Well made, heavy duty. Space saving design, unlike the triangle shapes. Only downside is that I couldn't just order the 1 pair I needed, but the price is fair so I'll save the rest for a rainy day.

Dude these things are so strong I only needed two for a 36" shelf. They were much heavier than I expected. Support is perfect- there's no sag at all despite the shelf being full. Easy enough to put in, but I really wish these would come with real drywall things. I'd pay extra for metal ones instead of the cheap plastic. Overall, satisfied and with 4 more left over for future use.

Innovative, Strong, secured.

Very sturdy yet slim brackets, made it easy for us to create a large custom floating shelf for above our gaming PC's that needed to hold a heavy weight of wood + collectables ontop. We routered out indents for them to set into which created an even better 'floating' finish.

These brackets look great and are very sturdy. I used 4 of these brackets to support 8 foot long glass shelves, and they look great. My only complaint is that if the mounting face was the same width as the arms, with holes in the center it would be easier to mount on 2x4 framed walls. The way I did it was to offset the brackets so that 2 screws go directly into the 2x4 studs, and two screws use the expansion screws to mount into the drywall. Also, the supplied exansion scews have a thicket face than a lot of expansion screws you can get at the hardware store, so if you use them, the bracket might not sit as flush to the wall than if you didn't use them or used a different type. It's not that bad unless you're really decerning and picky like me :) But I will say, that it's pretty awesome that you get all the mounting hardware you'd ever need in pretty much any situation, plus a few spares.

Lucen muy bonitas. Me gusto que vienen con sus propios taquetes incluso trae un nivel. Bien producto muy completo.

Very happy with these, very strong and well finished